
Đã thông báo qua email khi sản phẩm này có sẵn
- Mô tả
- Reviews
- Vận chuyển & Thanh toán
The BMXP341000 is a processor module for the Schneider Electric Modicon M340 automation platform. It executes PLC application tasks, manages local and distributed I/O processing, and supports serial Modbus and USB communications. It provides a maximum capacity of 512 discrete I/O and 128 analog I/O in multi-rack configurations, with 2,048 kB of internal memory and an 8 MB memory card for application backup.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | BMXP341000 |
| Brand | Schneider Electric |
| Product Type | Modicon M340 CPU Processor Module |
| Product Series | Modicon M340 |
| Automation Platform | Modicon M340 |
| Communication Protocol | Modbus RTU/ASCII |
| Maximum Rack Configuration | 2 racks |
| Discrete I/O Processor Capacity | 512 I/O (multi-rack) |
| Analog I/O Processor Capacity | 128 I/O (multi-rack); 66 I/O (single-rack) |
| Application-Specific Channels | 20 |
| Internal Memory | 2,048 kB |
| Data Memory | 128 kB |
| Program, Constants and Symbols Memory | 1,792 kB |
| Memory Card | BMXRMS008MP, 8 MB |
| Power Consumption | 72 mA at 24 VDC |
| Power Supply | Internal supply via module rack |
| Serial Interfaces | Non-isolated RS232C / RS485 via RJ45 |
| USB Interface | 12 Mbit/s |
| Ethernet / AS-Interface Processor Capacity | 2 Ethernet communication modules; 2 AS-Interface modules |
| Modbus Device Capacity | 0-32 devices per segment |
| Maximum Modbus Addresses | 0-248 |
| Boolean Instruction Execution Time | 0.18 us |
| Single-Length Word Instruction Execution Time | 0.38 us |
| Double-Length Word Instruction Execution Time | 0.26 us |
| Floating-Point Instruction Execution Time | 1.74 us |
| Maximum Boolean Instruction Throughput | 5.4 KInst/ms |
| Maximum Mixed Instruction Throughput | 4.2 KInst/ms (65% Boolean and 35% fixed arithmetic) |
| Application Tasks | 1 Master Task, 1 Fast Task, 32 Event Tasks |
| Operating Temperature | 0 to 60 deg C |
| Relative Humidity | 5-95%, non-condensing |
| Protection Rating | IP20 |
| Coating | TC |
| Status Indicators | RUN, I/O, CARD ERR, ERR, SER COM |
| Product Weight | 0.2 kg |
| Certifications | CE, UL, CSA, RCM, EAC, UKCA |
| EAN | 3595863910698 |
| Lifecycle Status | Sales discontinuation: 1 December 2027; service discontinuation: 31 December 2035 |
CPU Processing and Memory Architecture
The BMXP341000 executes the PLC application through a Master Task, a Fast Task and up to 32 Event Tasks. The Master Task supports cyclic or periodic execution, while the Fast Task handles time-sensitive application processing. Event Tasks provide additional execution paths for event-driven control operations.
Its 2,048 kB internal memory is divided into 128 kB for data and 1,792 kB for programs, constants and symbols. The supplied BMXRMS008MP 8 MB memory card provides backup storage for programs, constants, symbols and application data. This distinction is relevant when checking application memory requirements and backup arrangements.
Communication Interfaces
The CPU provides non-isolated serial communication through RJ45 connections, supporting RS232C and RS485 physical interfaces. Modbus RTU and ASCII communication modes allow the controller to exchange data with supported field devices and supervisory equipment.
The specified serial transmission rates range from 0.3 to 19.2 kbit/s. RS232C and RS485 configurations have different wiring and duplex characteristics, so the selected physical interface, cable arrangement and communication mode must match the connected equipment.
The USB interface operates at 12 Mbit/s. The product data also specifies a processor capacity for two Ethernet communication modules and two AS-Interface modules. These figures describe communication-module capacity, not built-in Ethernet or AS-Interface ports on the CPU itself.
I/O Capacity and Rack Configuration
The processor supports up to two racks and 11 slots. Its I/O processing capacity depends on the rack arrangement: 512 discrete I/O in the single-rack configuration, 66 analog I/O in a single-rack configuration, and up to 128 analog I/O in a multi-rack configuration. These limits should be checked against the actual rack layout and installed I/O modules.
The 20 application-specific channels and programmable control loops provide additional resources for application control. Modbus diagnostic counters and event counters support communication monitoring and fault analysis.
Serial Communication and Network Expansion
The serial interface supports the following configurations:
- RS232C character mode: full-duplex communication using two twisted, shielded pairs.
- RS485 character mode: half-duplex communication using one twisted, shielded pair.
- Modbus RTU/ASCII over RS232C or RS485: master/slave communication in half-duplex mode.
- Serial transmission rate: 0.3 to 19.2 kbit/s.
The specified maximum segment length is 10 m for non-isolated serial connections and 1,000 m for isolated serial connections. The corresponding point-to-point limits are 15 m. These limits depend on the communication configuration and isolation arrangement.
The CPU supports up to two Ethernet communication modules and two AS-Interface modules. Ethernet connectivity therefore requires a separate communication module rather than relying on an integrated Ethernet port.
Diagnostics and Operating Conditions
Five front-panel LEDs indicate the processor and communication status:
- RUN (green): processor operating status.
- I/O (red): I/O module fault.
- CARD ERR (red): memory card fault.
- ERR (red): processor or system fault.
- SER COM (yellow): Modbus serial communication activity.
The IP20 enclosure rating indicates protection against solid objects larger than 12.5 mm, with no specified water-ingress protection. The specified operating temperature is 0 to 60 deg C, and relative humidity is 5-95% without condensation.
Standards and Product Certifications
The BMXP341000 is listed with the following certifications and compliance markings:
- CE, UL, CSA, RCM, EAC and UKCA.
- IEC 61131-2.
- IEC 61010-2-201 and UL 61010-2-201.
- CSA C22.2 No. 61010-2-201.
- IACS E10.
- EN/IEC 61000-6-5, interface types 1 and 2.
- EN/IEC 61850-3, location G.
The product data also identifies compliance with the applicable low-voltage, electromagnetic compatibility and WEEE directives.
Frequently Asked Questions
Q: Does the BMXP341000 have an integrated Ethernet port?
A: No. The CPU has an integrated Modbus serial interface and USB port. Ethernet communication requires a separate Ethernet communication module installed in an available Modicon M340 rack slot. The processor supports up to two Ethernet communication modules.
Q: What is the difference between the single-rack and multi-rack I/O capacities?
A: The processor supports 512 discrete I/O in a single-rack configuration and 66 analog I/O in a single-rack configuration. The analog I/O capacity increases to 128 in a multi-rack configuration. Check both limits when planning the system architecture.
Q: Which memory card is supplied with the BMXP341000?
A: The specified memory card is the BMXRMS008MP, with 8 MB capacity. It is used to back up application programs, constants, symbols and data. Verify the card reference when checking replacement or maintenance requirements.
Thanh toán: T/T, Western Union.
Cảng vận chuyển: Hạ Môn.
Thời gian giao hàng: Thông thường từ 1–3 ngày làm việc sau khi xác nhận thanh toán (tùy tình trạng hàng tồn kho).
Giao hàng toàn cầu: Chúng tôi vận chuyển các linh kiện tự động hóa công nghiệp đến khách hàng trên toàn thế giới. Cước phí sẽ được báo cùng với yêu cầu báo giá của bạn.
Câu hỏi thường gặp
Các câu hỏi thường gặp về báo giá, vận chuyển, bảo hành và đổi trảNhấp vào Yêu cầu báo giá trên trang sản phẩm và gửi cho chúng tôi mã linh kiện, số lượng cần thiết và quốc gia nhận hàng. Đội ngũ bán hàng của chúng tôi sẽ phản hồi về tình trạng còn hàng, giá cả hiện tại và thời gian giao hàng dự kiến.
Các mặt hàng có sẵn thường được chuẩn bị sau khi thanh toán và xác nhận đơn hàng. Hầu hết đơn hàng được gửi đi từ kho của chúng tôi tại Trung Quốc, mặc dù địa điểm gửi hàng có thể thay đổi tùy theo tình trạng hàng tồn kho hiện tại.
Có. Chúng tôi vận chuyển linh kiện tự động hóa công nghiệp đến khách hàng trên toàn thế giới. Chi phí vận chuyển và thời gian giao hàng phụ thuộc vào điểm đến, trọng lượng kiện hàng, kích thước sản phẩm và các yêu cầu nhập khẩu tại địa phương.
Chúng tôi thường sử dụng DHL, FedEx, UPS và các dịch vụ chuyển phát quốc tế khác. Có thể lựa chọn đơn vị vận chuyển tùy theo điểm đến, tốc độ giao hàng, kích thước lô hàng và yêu cầu của khách hàng.
Các sản phẩm của chúng tôi thường được bảo hành 12 tháng. Các sản phẩm đủ điều kiện cũng có thể được trả lại theo chính sách hoàn tiền trong 30 ngày. Vui lòng liên hệ với đội ngũ của chúng tôi trước khi trả lại bất kỳ sản phẩm nào để xác nhận các điều khoản áp dụng và hướng dẫn trả hàng.
Bạn cũng có thể thích
Bài đăng blog
Tin tức về tự động hóa công nghiệp, hướng dẫn kỹ thuật và cập nhật sản phẩm.
