
Per E-Mail benachrichtigen, sobald dieses Produkt verfügbar ist
- Beschreibung
- Reviews
- Versand & Zahlung
The BMXDDI6402K is a 64-channel digital input module in the Schneider Electric Modicon X80 range. It accepts 24 VDC positive-logic input signals through two 40-pin connectors, with isolated input channels and individual channel status indication. The module supports Modicon M340 and M580 PLC architectures, including local and remote I/O configurations.
Functional Description
The BMXDDI6402K acquires discrete field signals and transfers their status to the PLC system for logic processing. Its 64 isolated input channels allow multiple field devices to be monitored through a single I/O module.
The positive-logic (sink) input configuration defines the electrical relationship between the field signal and the input circuit. The guaranteed ON and OFF voltage thresholds provide the limits for determining valid input states.
Input Characteristics
The module provides a typical response time of 4 ms and a maximum response time of 7 ms. These values determine how quickly changes in field input signals are reflected in the module's input status.
The input circuit has a 40 kOhm impedance and draws 0.6 mA per input at 24 VDC. Input parallelization is not supported, so each channel should be treated as an individual input point.
Connection and Diagnostics
Two 40-pin connectors provide the field wiring interface. The module uses channel-level LEDs to indicate individual input status, together with RUN and ERR indicators for module operating status and fault identification.
The specified external protection is a 0.5 A fast-acting fuse per channel group. The module does not provide reverse-polarity protection, so the external supply polarity must be observed during wiring.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | BMXDDI6402K |
| Brand | Schneider Electric |
| Product Series | Modicon X80 |
| Product Type | Discrete Input Module |
| Number of Inputs | 64 |
| Input Type | Isolated digital inputs |
| Rated Input Voltage | 24 VDC |
| Input Logic | Positive logic (sink) |
| Input Current | 0.6 mA at 24 VDC |
| Guaranteed ON Voltage | >= 15 V |
| Guaranteed OFF Voltage | 18 VDC: Sensor OK |
| Input Isolation | 1500 V for 1 minute |
| Insulation Resistance | > 10 MOhm at 500 VDC |
| Input Parallelization | Not supported |
| Power Dissipation | 4.3 W |
| Protection | External 0.5 A fast-acting fuse per channel group |
| Reverse Polarity Protection | Not provided |
| Hot-Swapping Fallback | Supported |
| MTBF | 510,000 hours |
| Local Diagnostics | RUN, ERR, I/O and individual channel LEDs |
| Controller Compatibility | Modicon M340 and M580 |
| I/O Configuration | Local or remote I/O |
| Field Connection | 2 x 40-pin connectors |
| Mounting | Modicon X80 module rack |
| Dimensions (H x W x D) | 134.6 x 32 x 86 mm |
| Weight | 0.145 kg |
| Protection Rating | IP20 |
| Operating Temperature | 0 to 60 deg C |
| Storage Temperature | -40 to 85 deg C |
| Relative Humidity | 5-95% at 55 deg C, non-condensing |
| Operating Altitude | 0-2,000 m; derating required from 2,000 to 5,000 m |
| Vibration Resistance | 3 Gn |
| Shock Resistance | 30 Gn |
| Pollution Degree | 2 |
| EAN | 3595863910445 |
Installation and System Integration
The BMXDDI6402K is installed in a Modicon X80 module rack and secured with two screws. Its two 40-pin connectors require suitable preassembled wiring assemblies or compatible connection accessories.
The module is designed for M340 and M580 PLC architectures. Before replacement, verify the controller platform, local or remote rack configuration, connector arrangement and field wiring. The 24 VDC sensor supply must remain within the specified 19-30 VDC range.
Certifications and Environmental Conditions
The product specification identifies CE, cULus, RCM, EAC and UKCA markings. The listed compliance requirements include the Low Voltage Directive 2014/35/EU and EMC Directive 2014/30/EU.
The module has an IP20 enclosure rating and a specified operating temperature range of 0 to 60 deg C. Condensation is not permitted under the stated humidity conditions.
Frequently Asked Questions
Q: How many digital input channels does the BMXDDI6402K provide?
A: It provides 64 electrically isolated 24 VDC digital input channels. The channels use positive logic (sink) and are connected through two 40-pin connectors.
Q: Can the BMXDDI6402K be used with Modicon M340 and M580 controllers?
A: Yes. It is specified for Modicon M340 and M580 PLC platforms, supporting local and remote I/O architectures. The applicable rack and system configuration must be verified before installation.
Q: Does the BMXDDI6402K support hot swapping?
A: The product specifications identify hot-swapping fallback support. Actual replacement procedures must follow the applicable PLC rack and system maintenance requirements.
Zahlung: T/T, Western Union.
Versandhafen: Xiamen.
Lieferzeit: In der Regel 1–3 Werktage nach Bestätigung der Zahlung (je nach Lagerbestand).
Weltweiter Versand: Wir versenden Teile für die industrielle Automatisierung an Kunden weltweit. Die Frachtkosten werden mit Ihrem RFQ angegeben.
Häufig gestellte Fragen
Häufige Fragen zu Angeboten, Versand, Garantie und RückgabenKlicken Sie auf der Produktseite auf Angebot anfordern und teilen Sie uns die Teilenummer, die benötigte Menge und das Zielland mit. Unser Vertriebsteam antwortet mit der aktuellen Verfügbarkeit, dem Preis und der voraussichtlichen Lieferzeit.
Vorrätige Artikel werden normalerweise nach Zahlung und Auftragsbestätigung vorbereitet. Die meisten Bestellungen werden von unserem Lager in China versandt, wobei der Versandort je nach aktuellem Lagerbestand variieren kann.
Ja. Wir versenden Teile für die industrielle Automatisierung an Kunden weltweit. Versandkosten und Lieferzeit hängen vom Bestimmungsort, dem Paketgewicht, der Produktgröße und den örtlichen Einfuhrbestimmungen ab.
Wir nutzen in der Regel DHL, FedEx, UPS und andere internationale Kurierdienste. Der Versanddienstleister kann je nach Zielort, Liefergeschwindigkeit, Sendungsgröße und Kundenanforderungen ausgewählt werden.
Unsere Produkte sind grundsätzlich durch eine 12-monatige Garantie abgedeckt. Für berechtigte Produkte ist außerdem eine Rückgabe gemäß unserer 30-Tage-Erstattungsrichtlinie möglich. Bitte kontaktieren Sie unser Team, bevor Sie einen Artikel zurücksenden, um die geltenden Bedingungen und Rücksendeanweisungen zu bestätigen.
Das könnte Ihnen auch gefallen
Blogbeiträge
Neuigkeiten zur industriellen Automatisierung, technische Anleitungen und Produktneuheiten.
