
Per E-Mail benachrichtigen, sobald dieses Produkt verfügbar ist
- Beschreibung
- Reviews
- Versand & Zahlung
The Schneider Electric BMXDDI3202K is a 32-channel discrete input module from the Modicon X80 I/O platform, designed for Modicon M340 and M580 PLC architectures. It processes 24 VDC positive-logic (sink) field signals using a high-density 40-pin connector interface, allowing compact field wiring via pre-assembled cords or Telefast connection sub-bases.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | BMXDDI3202K |
| Brand | Schneider Electric |
| Series | Modicon X80 |
| Product Type | Discrete Input Module |
| Number of Inputs | 32 isolated discrete inputs |
| Input Voltage | 24 VDC (positive logic / sink) |
| Input Wiring Mode | 2-wire or 3-wire |
| Input Current | 2.5 mA at 24 VDC |
| State 1 Voltage Threshold | greater than or equal to 11 V |
| State 0 Voltage Threshold | less than or equal to 5 V |
| State 1 Current Threshold | greater than or equal to 2 mA |
| State 0 Current Threshold | less than or equal to 0.5 mA |
| Input Impedance | 9600 Ohm |
| Typical Response Time | 4 ms |
| Maximum Response Time | 7 ms |
| Sensor Power Supply | 19 to 30 VDC |
| Sensor Supply Fault Threshold | less than 14 VDC (fault), greater than 18 VDC (OK) |
| Current Consumption | 160 mA at 3.3 VDC (backplane), 121 mA DC typical |
| Power Dissipation | 3.9 W |
| Dielectric Isolation | 1500 V AC (50/60 Hz, 1 min) primary/secondary; 500 VDC (1 min) between channel groups |
| Hot-Swapping | Yes (fallback supported) |
| Local LED Indicators | 1 green RUN, 1 red ERR, 1 red I/O, 32 green channel status LEDs |
| Coating Type | Standard version (non-conformal coated) |
| Degree of Protection | IP20 |
| Operating Temperature | 0 to 60 deg C |
| Storage Temperature | -40 to 85 deg C |
| Operating Altitude | 0 to 2000 m (2000 to 5000 m with derating) |
| Dimensions (H x W x D) | 134.6 mm x 32 mm x 86 mm |
| Weight | 0.112 kg |
Signal Processing and Electrical Characteristics
The module accepts 24 VDC sink inputs compliant with IEC 61131-2 and IEC 60947-5-2 for 2-wire and 3-wire sensors. With a 9600 Ohm input impedance and 2.5 mA nominal input current at 24 VDC, it limits field power draw while guaranteeing State 1 recognition at 11 V or higher and State 0 at 5 V or lower.
Built-in sensor voltage supervision monitors the external 19 to 30 VDC field supply, triggering a fault state below 14 VDC and restoring normal status above 18 VDC. Input paralleling is not supported on this module.
Connector Interface and Mounting
Unlike screw-terminal Modicon X80 modules, the BMXDDI3202K uses a 40-pin connector (Pfostenstecker / HE10 style) to accommodate all 32 channels within a single 32 mm wide slot. Field connections require pre-wired 40-pin cordsets (such as BMXFCW or BMXFCC series) or Advantys Telefast ABE7 passive connection sub-bases.
The module mounts directly into a Modicon X80 backplane rack (for M340 or M580 local/remote I/O drops) and is secured with two captive mounting screws. Front-panel diagnostics include module-level RUN, ERR, and I/O LEDs alongside individual green status LEDs for each of the 32 channels.
Frequently Asked Questions
Q: How does the BMXDDI3202K connect to field sensors?A: It uses a 40-pin connector rather than removable screw terminals. You must connect it using pre-assembled 40-pin cables (like BMXFCW503 or BMXFCC series) or route signals through an Advantys Telefast ABE7 terminal block.
Q: What is the difference between BMXDDI3202K and the coated version?A: The BMXDDI3202K is the standard version without conformal coating, rated for 0 to 60 deg C operation and pollution degree 2. Applications requiring hardened conformal coating use the ruggedized variant (typically suffixed with H).
Q: Does the BMXDDI3202K support hot-swapping in a running rack?A: Yes, the module supports hot-swapping fallback when installed in compatible Modicon X80 racks, allowing replacement without powering down the entire PLC station.
Zahlung: T/T, Western Union.
Versandhafen: Xiamen.
Lieferzeit: In der Regel 1–3 Werktage nach Bestätigung der Zahlung (je nach Lagerbestand).
Weltweiter Versand: Wir versenden Teile für die industrielle Automatisierung an Kunden weltweit. Die Frachtkosten werden mit Ihrem RFQ angegeben.
Häufig gestellte Fragen
Häufige Fragen zu Angeboten, Versand, Garantie und RückgabenKlicken Sie auf der Produktseite auf Angebot anfordern und teilen Sie uns die Teilenummer, die benötigte Menge und das Zielland mit. Unser Vertriebsteam antwortet mit der aktuellen Verfügbarkeit, dem Preis und der voraussichtlichen Lieferzeit.
Vorrätige Artikel werden normalerweise nach Zahlung und Auftragsbestätigung vorbereitet. Die meisten Bestellungen werden von unserem Lager in China versandt, wobei der Versandort je nach aktuellem Lagerbestand variieren kann.
Ja. Wir versenden Teile für die industrielle Automatisierung an Kunden weltweit. Versandkosten und Lieferzeit hängen vom Bestimmungsort, dem Paketgewicht, der Produktgröße und den örtlichen Einfuhrbestimmungen ab.
Wir nutzen in der Regel DHL, FedEx, UPS und andere internationale Kurierdienste. Der Versanddienstleister kann je nach Zielort, Liefergeschwindigkeit, Sendungsgröße und Kundenanforderungen ausgewählt werden.
Unsere Produkte sind grundsätzlich durch eine 12-monatige Garantie abgedeckt. Für berechtigte Produkte ist außerdem eine Rückgabe gemäß unserer 30-Tage-Erstattungsrichtlinie möglich. Bitte kontaktieren Sie unser Team, bevor Sie einen Artikel zurücksenden, um die geltenden Bedingungen und Rücksendeanweisungen zu bestätigen.
Das könnte Ihnen auch gefallen
Blogbeiträge
Neuigkeiten zur industriellen Automatisierung, technische Anleitungen und Produktneuheiten.
