Zu den Produktinformationen springen
1 von 3

Schneider Electric BMXFTA300 Modicon X80 Prefabricated Cable Assembly

18 auf Lager
  • Manufacturer: Schneider
  • Product No.: BMXFTA300
  • Country of origin: France
  • Product Type: Modicon X80 Prefabricated Cable Assembly
  • Condition: Brandneu
  • Payment: T/T, Western Union
  • Weight: 0.5 kg
  • Shipping port: Xiamen
  • Warranty: 12 Monate
  • Beschreibung
  • Reviews
  • Versand & Zahlung

The Schneider Electric BMXFTA300, also cataloged as the BMXFTA300 prefabricated cable assembly, provides the electrical connection between Modicon M340 I/O modules and Advantys Telefast ABE 7 terminal blocks. It uses a 28-pin removable terminal block connector on the module side and a 25-pin SUB-D connector on the terminal block side, with a cable length of 3 m.

Hardware Specifications

Parameter Specification
Model BMXFTA300
Brand Schneider Electric
Product Series Modicon X80
Product Type Prefabricated Cable Assembly
Accessory Type Preformed Cable Set
Weight 0.5 kg
Cable Length 3 m
Module-Side Connection 1 removable 28-pin terminal block
Terminal Block-Side Connection 1 SUB-D 25-pin connector
Connector Configuration 28-pin terminal block to 25-pin SUB-D
Compatible I/O Modules BMXAMI0800, BMXAMI0810
Compatible Terminal Blocks ABE7CPA02, ABE7CPA03, ABE7CPA31, ABE7CPA31/E
Packaging Quantity 1 unit
EAN 3595864080451

I/O Connection Architecture and Compatibility

The BMXFTA300 provides a preassembled electrical interface between Modicon M340 analog I/O modules and Advantys Telefast ABE 7 connection systems.

Its connection arrangement consists of:

  • Module side: A removable 28-pin terminal block connects to the I/O module.
  • Terminal block side: A 25-pin SUB-D connector connects to the ABE 7 terminal block.
  • Cable assembly: A fixed 3 m cable carries the corresponding electrical connections between both interfaces.

The cable is specified for the BMXAMI0800 and BMXAMI0810 analog input modules. Compatibility also includes the ABE7CPA02, ABE7CPA03, ABE7CPA31, and ABE7CPA31/E terminal block references.

For system integration, connector pin assignments and channel wiring must correspond to the selected I/O module and terminal block configuration.

Frequently Asked Questions

Q: Can the BMXFTA300 be used with both BMXAMI0800 and BMXAMI0810?

A: Yes. Both analog input modules are explicitly listed as compatible products. The cable provides the 28-pin terminal block interface required on the module side.

Q: Does the BMXFTA300 support hot-swapping?

A: Hot-swapping capability is not specified for this cable assembly. Disconnect the associated electrical circuits and follow the module manufacturer's maintenance procedure before removing or installing connectors.

Q: What should be checked when replacing an existing BMXFTA300?

A: Verify the 28-pin removable terminal block, 25-pin SUB-D connector, 3 m cable length, and compatibility with the installed ABE 7 terminal block. Check connector condition and wiring continuity before returning the I/O circuit to service.

Field Installation Guidelines

1. Connector Verification: Confirm that the 28-pin removable terminal block matches the designated Modicon I/O module interface and that the 25-pin SUB-D connector matches the ABE 7 terminal block.

2. Cable Routing: Route the 3 m cable away from high-voltage power conductors, motor cables, and sources of electromagnetic interference where practical.

3. Mechanical Installation: Avoid excessive bending, tensile loading, twisting, or compression of the cable. Secure the assembly to prevent connector strain.

4. Electrical Inspection: Inspect connector contacts for oxidation, contamination, or mechanical damage before installation.

5. Shielding and Grounding: Follow the module and terminal block installation documentation for cable shielding and grounding arrangements. Do not assume an undocumented shield termination configuration.

6. Commissioning: Verify connector engagement, wiring continuity, channel correspondence, and analog input signal readings before placing the associated control loop into operation.

Zahlung: T/T, Western Union.

Versandhafen: Xiamen.

Lieferzeit: In der Regel 1–3 Werktage nach Bestätigung der Zahlung (je nach Lagerbestand).

Weltweiter Versand: Wir versenden Teile für die industrielle Automatisierung an Kunden weltweit. Die Frachtkosten werden mit Ihrem RFQ angegeben.

Häufig gestellte Fragen

Häufige Fragen zu Angeboten, Versand, Garantie und Rückgaben

Klicken Sie auf der Produktseite auf Angebot anfordern und teilen Sie uns die Teilenummer, die benötigte Menge und das Zielland mit. Unser Vertriebsteam antwortet mit der aktuellen Verfügbarkeit, dem Preis und der voraussichtlichen Lieferzeit.

Vorrätige Artikel werden normalerweise nach Zahlung und Auftragsbestätigung vorbereitet. Die meisten Bestellungen werden von unserem Lager in China versandt, wobei der Versandort je nach aktuellem Lagerbestand variieren kann.

Ja. Wir versenden Teile für die industrielle Automatisierung an Kunden weltweit. Versandkosten und Lieferzeit hängen vom Bestimmungsort, dem Paketgewicht, der Produktgröße und den örtlichen Einfuhrbestimmungen ab.

Wir nutzen in der Regel DHL, FedEx, UPS und andere internationale Kurierdienste. Der Versanddienstleister kann je nach Zielort, Liefergeschwindigkeit, Sendungsgröße und Kundenanforderungen ausgewählt werden.

Unsere Produkte sind grundsätzlich durch eine 12-monatige Garantie abgedeckt. Für berechtigte Produkte ist außerdem eine Rückgabe gemäß unserer 30-Tage-Erstattungsrichtlinie möglich. Bitte kontaktieren Sie unser Team, bevor Sie einen Artikel zurücksenden, um die geltenden Bedingungen und Rücksendeanweisungen zu bestätigen.

Products FAQs

Das könnte Ihnen auch gefallen