Ugrás a termékinformációhoz
1 ból 3

GE IC200MDL940F VersaMax 16-Point Relay Output Module

11 készleten
  • Manufacturer: General Electric
  • Product No.: IC200MDL940F
  • Product Type: VersaMax Analog Output Module
  • Condition: Teljesen új
  • Payment: T/T, Western Union
  • Weight: 0.2 kg
  • Shipping port: Hsziamen
  • Warranty: 12 hónap
  • Leírás
  • Reviews
  • Szállítás és fizetés

The GE IC200MDL940F is a 16-point relay output module in the VersaMax I/O product family. It provides individually isolated Form A (normally open) relay contacts for switching external AC and DC field loads. Its voltage-dependent contact ratings allow the module to handle different field circuit requirements, while individual channel indicators provide local output status information.

Output Configuration and Switching

The module uses 16 normally open mechanical relay contacts. Each output operates as a dry contact: the PLC output command controls relay operation, while the external field power supply provides the energy required by the connected load.

Individual channel isolation allows separate field circuits to be switched without sharing a common output reference. This is useful when different output points operate loads supplied from independent AC or DC circuits.

The relay contacts are rated for different current levels depending on the applied voltage:

  • 5-265 VAC: maximum 2.0 A per point.
  • 5-30 VDC: maximum 2.0 A per point.
  • 31-125 VDC: maximum 0.2 A per point.

These ratings are specified for resistive loads. The 2.0 A rating must not be applied to the entire DC voltage range. Inductive loads also require consideration of contact switching stress and suppression requirements.

Switching Characteristics and Output Protection

The maximum ON and OFF response times are both 10 ms. This is a mechanical relay output rather than a high-speed semiconductor output, so it is intended for discrete switching rather than pulse-width modulation or rapid repetitive switching.

For inductive loads, the specified maximum switching frequency is 20 cycles per minute. The module does not include internal output fuses or snubber circuits. External overcurrent protection and suitable suppression components should be selected according to the connected load.

Individual point-status LEDs indicate the output states, while the OK indicator provides information about backplane power availability.

Backplane Power and Installation

The module draws its operating power from the VersaMax backplane, with a maximum specified 5 VDC current consumption of 490 mA. The external field supply provides the power switched through the relay contacts; the backplane supply should not be confused with the field-load supply.

An appropriate VersaMax I/O carrier is required for field wiring termination. Before installation or replacement, verify the carrier arrangement, terminal assignments, field supply voltage and contact-current requirements against the installed hardware configuration.

Technical Specifications

Parameter Specification
Model IC200MDL940F
Brand GE
Product Series VersaMax
Product Type Relay Output Module
Number of Output Points 16
Relay Contact Type Form A, Normally Open (NO)
Relay Mechanism Fixed coil, moving armature
Contact Material Silver alloy
Output Voltage 0-265 VAC; 0-125 VDC
Nominal Output Voltage 120/240 VAC; 5/24/125 VDC
Maximum Load Current 2.0 A per point (5-265 VAC); 2.0 A per point (5-30 VDC); 0.2 A per point (31-125 VDC)
Minimum Load Current 10 mA per point
Channel-to-Channel Isolation Individually isolated points
ON Response Time 10 ms maximum
OFF Response Time 10 ms maximum
Switching Frequency 20 cycles per minute (inductive loads)
Output Voltage Drop 0.3 V maximum
Output Leakage Current Not applicable (open relay contact)
Backplane Power Supply 5 VDC
Backplane Current Consumption 490 mA maximum
External AC Field Supply Frequency 47-63 Hz

Frequently Asked Questions

Q: Can the IC200MDL940F switch different AC and DC voltage circuits simultaneously?

A: Yes. Its individually isolated relay contacts allow separate field circuits to use different AC or DC voltage sources, provided each circuit remains within the specified voltage and current ratings.

Q: What is the maximum DC switching current?

A: The maximum is 2.0 A per point at 5-30 VDC. For 31-125 VDC, the maximum decreases to 0.2 A per point. These ratings should be checked against the actual load characteristics.

Q: Does the IC200MDL940F provide built-in protection for inductive loads?

A: No. It does not include internal fuses or snubber circuits. External circuit protection and suitable transient suppression should be evaluated when switching relay coils, contactors or solenoid valves.

Fizetés: T/T, Western Union.

Szállítási kikötő: Hsziamen.

Átfutási idő: Általában 1–3 munkanap a fizetés visszaigazolását követően (készlettől függően).

Világszintű szállítás: Ipari automatizálási alkatrészeket szállítunk ügyfeleinknek világszerte. A szállítási költséget az ajánlatkérésével együtt adjuk meg.

GYIK.

Gyakori kérdések az árajánlatokról, a szállításról, a garanciáról és a visszaküldésről

A termékoldalon kattintson az Árajánlat kérése gombra, majd küldje el nekünk a cikkszámot, a szükséges mennyiséget és a célországot. Értékesítési csapatunk válaszol az aktuális elérhetőséggel, az árakkal és a várható szállítási idővel.

A raktáron lévő termékeket általában a fizetés és a rendelés visszaigazolása után készítjük elő. A legtöbb rendelést kínai raktárunkból küldjük ki, azonban a feladási hely az aktuális készlettől függően változhat.

Igen. Ipari automatizálási alkatrészeket szállítunk ügyfeleinknek világszerte. A szállítási költség és a szállítási idő a célállomástól, a csomag súlyától, a termék méretétől és a helyi importkövetelményektől függ.

Gyakran használjuk a DHL, FedEx, UPS és egyéb nemzetközi futárszolgálatokat. A fuvarozó a rendeltetési hely, a kézbesítés sebessége, a küldemény mérete és az ügyfél igényei alapján választható ki.

Termékeinkre általában 12 hónapos garancia vonatkozik. A jogosult termékek a 30 napos visszatérítési szabályzatunk alapján is visszaküldhetők. Bármely termék visszaküldése előtt lépjen kapcsolatba csapatunkkal az alkalmazandó feltételek és a visszaküldési útmutató megerősítése érdekében.

Products FAQs

Ez is tetszhet Önnek