Ugrás a termékinformációhoz
1 ból 3

Schneider BMXCPS4002 Modicon X80 Redundant Power Supply Module

18 készleten
  • Manufacturer: Schneider
  • Product No.: BMXCPS4002
  • Country of origin: France
  • Product Type: Modicon X80 Redundant Power Supply Module
  • Condition: Teljesen új
  • Payment: T/T, Western Union
  • Weight: 0.51 kg
  • Shipping port: Hsziamen
  • Warranty: 12 hónap
  • Leírás
  • Reviews
  • Szállítás és fizetés

The Schneider BMXCPS4002 is a Modicon X80 power supply module designed for redundant power architectures in PLC and PAC systems. It accepts a 100-240 V AC primary supply and provides separate 3.3 V DC and 24 V DC secondary outputs for module logic and I/O power distribution. Network-based diagnostics and redundancy monitoring support power supply status supervision in the control system.

Power Supply Function and Redundant Architecture

The BMXCPS4002 supplies the internal power requirements of an X80 module rack. Its 3.3 V DC output powers I/O module logic, while the 24 V DC output supplies I/O module power and the processor, subject to the specified load conditions.

The module supports redundant power architecture and provides redundancy status information. Its diagnostic functions include temperature monitoring, redundancy testing, operating time and remaining service-life information. These diagnostics can be accessed over the network.

Electrical Protection and Status Monitoring

The secondary circuits incorporate overload, overvoltage and short-circuit protection. These functions protect the downstream power distribution circuits against specified electrical fault conditions. The primary circuit also has internal protection.

Three green LEDs indicate voltage availability, redundancy status and overall power supply status. A RESET button provides a cold-start reset function.

Technical Specifications

Parameter Specification
Model BMXCPS4002
Brand Schneider Electric
Product Series Modicon X80
Product Type Redundant Power Supply Module
Primary Voltage 100-240 V AC
Primary Voltage Limits 85-264 V
Supply Frequency 50/60 Hz
Frequency Limits 47-63 Hz
Apparent Power 0.13 kVA
Input Current 0.55 A at 240 V; 1.01 A at 115 V
Inrush Current 30 A at 120 V; 60 A at 240 V
Secondary Output 3.3 V DC and 24 V DC
Secondary Power 18 W at 3.3 V DC; 40 W at 24 V DC
Secondary Current 5.5 A at 3.3 V DC; 1.67 A at 24 V DC
Maximum Power Dissipation 8.5 W
Power Interruption Immunity 1 ms
Protection Secondary overload, overvoltage and short-circuit protection
Diagnostics Temperature monitoring, redundancy test, operating time and remaining operating life
Status Indicators 3 green LEDs
Reset Function Cold-start RESET button
Electrical Connections 2-pin alarm relay connector; 5-pin power supply and protective earth connector
Insulation Resistance >= 100 MOhm, primary/earth and primary/secondary
Dielectric Strength 1500 V primary/secondary; 1500 V primary/earth; 2300 V sensor supply/secondary; 500 V sensor output/ground
Protection Rating IP20
Operating Temperature 0 to 60 deg C
Storage Temperature -40 to 85 deg C
Relative Humidity 5-95% at 55 deg C, non-condensing
Operating Altitude 0-2,000 m; derating required from 2,000 to 5,000 m
Coating TC, Humiseal 1A33
Environmental Classification 3C3 and 3C4 according to IEC 60721-3-3
Vibration Resistance 3 Gn
Shock Resistance 30 gn
MTBF 792,000 h
Weight 0.51 kg
EAN 3606480927560
Lifecycle Carbon Footprint 496 kg CO2 eq.

Electrical Connections and Installation

The BMXCPS4002 has separate connectors for the alarm relay and incoming power supply. The 5-pin connector provides the power supply and protective earth connections, while the 2-pin connector is used for the alarm relay.

Installation requirements include:

  • Mount the module in a Modicon X80 module rack.
  • Secure the power supply using two screws.
  • Use the supplied removable 5-way and 2-way terminal blocks.
  • Observe the specified operating temperature and altitude derating conditions.

The module has an IP20 protection rating and is intended for installation within an appropriate equipment enclosure.

Certifications and Standards

The product documentation identifies the following certifications and standards:

  • Certifications: CE, RCM, Merchant Navy, CSA, EAC and UL.
  • EN 61131-2
  • EN 61000-6-4
  • EN 61000-6-2
  • EN 61010-2-201
  • EU Low Voltage Directive 2014/35/EU
  • EU EMC Directive 2014/30/EU

Frequently Asked Questions

Q: Can the BMXCPS4002 be used in a redundant power supply architecture?

A: Yes. The BMXCPS4002 is specified for redundant power architectures. Its redundancy monitoring functions provide status information for system-level supervision. The actual redundant configuration must follow the applicable Modicon X80 system design requirements.

Q: What are the two secondary output voltages used for?

A: The 3.3 V DC output supplies I/O module logic, while the 24 V DC output supplies I/O module power and the processor under the specified load conditions. The rated output powers are 18 W and 40 W respectively.

Q: Does the BMXCPS4002 provide network diagnostics?

A: Yes. Available diagnostic information includes temperature sensor data, redundancy test results, operating time and remaining operating life. These functions support remote monitoring of the power supply condition.

Fizetés: T/T, Western Union.

Szállítási kikötő: Hsziamen.

Átfutási idő: Általában 1–3 munkanap a fizetés visszaigazolását követően (készlettől függően).

Világszintű szállítás: Ipari automatizálási alkatrészeket szállítunk ügyfeleinknek világszerte. A szállítási költséget az ajánlatkérésével együtt adjuk meg.

GYIK.

Gyakori kérdések az árajánlatokról, a szállításról, a garanciáról és a visszaküldésről

A termékoldalon kattintson az Árajánlat kérése gombra, majd küldje el nekünk a cikkszámot, a szükséges mennyiséget és a célországot. Értékesítési csapatunk válaszol az aktuális elérhetőséggel, az árakkal és a várható szállítási idővel.

A raktáron lévő termékeket általában a fizetés és a rendelés visszaigazolása után készítjük elő. A legtöbb rendelést kínai raktárunkból küldjük ki, azonban a feladási hely az aktuális készlettől függően változhat.

Igen. Ipari automatizálási alkatrészeket szállítunk ügyfeleinknek világszerte. A szállítási költség és a szállítási idő a célállomástól, a csomag súlyától, a termék méretétől és a helyi importkövetelményektől függ.

Gyakran használjuk a DHL, FedEx, UPS és egyéb nemzetközi futárszolgálatokat. A fuvarozó a rendeltetési hely, a kézbesítés sebessége, a küldemény mérete és az ügyfél igényei alapján választható ki.

Termékeinkre általában 12 hónapos garancia vonatkozik. A jogosult termékek a 30 napos visszatérítési szabályzatunk alapján is visszaküldhetők. Bármely termék visszaküldése előtt lépjen kapcsolatba csapatunkkal az alkalmazandó feltételek és a visszaküldési útmutató megerősítése érdekében.

Products FAQs

Ez is tetszhet Önnek