
Értesítés e-mailben, amikor ez a termék elérhetővé válik
- Leírás
- Reviews
- Szállítás és fizetés
The Schneider BMXDDI1603 is a 16-channel discrete input module in the Modicon X80 range, designed to acquire 48 VDC signals from field devices in industrial automation systems. It provides isolated inputs with positive logic, supports 2-wire and 3-wire sensor connections, and includes input polarity protection and individual channel status indication. Its 4 ms typical response time supports discrete signal acquisition and controller input processing.
Input Configuration and Signal Processing
The BMXDDI1603 provides 16 isolated digital input channels operating at 48 VDC. Its positive input logic (sink) is designed for compatible field signal circuits. Each input has a nominal current of 2.5 mA at 48 VDC and an input impedance of 19.2 kOhm.
The guaranteed switching thresholds distinguish valid ON and OFF states:
- Guaranteed ON state: at least 34 V.
- Guaranteed OFF state: below 10 V.
- Guaranteed ON-state current: at least 2 mA.
- Guaranteed OFF-state current: no more than 0.5 mA.
These thresholds define the voltage and current conditions under which the controller recognizes a field signal as logic 1 or logic 0. The module supports input parallelization and 2-wire or 3-wire wiring configurations.
Response Time and Input Protection
The module has a typical DC response time of 4 ms and a maximum response time of 7 ms. These values describe the input signal processing delay and should be considered when selecting the module for applications involving short-duration signals or time-sensitive discrete events.
Input protection includes reverse-polarity protection with fast tripping. The specified external fuse rating is 0.5 A per channel group. The sensor supply voltage range is 36-60 VDC, while the sensor voltage monitoring function identifies a sensor fault below 24 VDC and a normal sensor condition above 36 VDC.
Electrical Characteristics and Isolation
The module has a typical current consumption of 76 mA DC and a maximum current consumption of 107 mA at 3.3 VDC. Its specified power dissipation is 3.6 W. Isolation between the channels and terminal block is rated at 1,500 V for 1 minute.
The isolation resistance is greater than 10 MOhm at 500 VDC. These electrical characteristics are relevant when checking rack power capacity, field wiring insulation, and signal separation requirements.
Status Indication and Diagnostics
Local indicators provide operating and channel-level status information:
- One green RUN LED indicates module operation.
- One green LED per channel indicates individual channel status.
- One red ERR LED indicates a module fault.
- One additional red I/O LED provides module I/O status indication.
The individual channel LEDs help maintenance personnel identify input signal conditions without relying exclusively on controller diagnostics.
Modicon X80 Platform and Installation
The BMXDDI1603 belongs to the Modicon X80 I/O platform, which provides a common hardware environment for Modicon M340 and Modicon M580 PLC architectures, including local and remote I/O configurations. Its application in an existing system depends on the selected PLC platform, rack configuration, and terminal block arrangement.
The module is installed in a compatible module rack and secured with two screws. The specified connection options include 20-pin cage, screw-terminal, and removable spring-terminal blocks. The module also supports hot-swapping fallback, as indicated in the product specifications.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | BMXDDI1603 |
| Brand | Schneider Electric |
| Product Range | Modicon X80 |
| Product Type | Discrete Input Module |
| Number of Inputs | 16 |
| Input Type | Isolated digital inputs |
| Input Voltage | 48 VDC |
| Input Logic | Positive logic (current sink) |
| Input Current | 2.5 mA at 48 VDC |
| Input Wiring | 2-wire or 3-wire |
| Input Impedance | 19,200 Ohm |
| Sensor Supply Voltage | 36-60 VDC |
| Typical Response Time | 4 ms |
| Maximum Response Time | 7 ms |
| Guaranteed ON Voltage | >= 34 V |
| Guaranteed OFF Voltage | < 10 V |
| Guaranteed ON Current | >= 2 mA |
| Guaranteed OFF Current | 36 VDC |
| Typical Current Consumption | 76 mA at 3.3 VDC |
| Maximum Current Consumption | 10 MOhm at 500 VDC |
| Hot-Swapping Fallback | Yes |
| MTBF | 777,000 hours |
| Mounting | Modicon X80 module rack |
| Dimensions (H x W x D) | 103.7 x 32 x 86 mm |
| Net Weight | 0.115 kg |
| Protection Rating | IP20 |
| Protective Treatment | Standard version |
| Operating Temperature | 0 to 60 deg C |
| Storage Temperature | -40 to 85 deg C |
| Relative Humidity | 5-95% at 55 deg C, non-condensing |
| Operating Altitude | 0-2,000 m; 2,000-5,000 m with derating |
| Pollution Degree | 2 |
| Vibration Resistance | 3 Gn |
| Shock Resistance | 30 Gn |
| Certifications and Markings | CE, UKCA, cULus, RCM, EAC |
| EAN | 3595863966930 |
Frequently Asked Questions
Q: Can the BMXDDI1603 be used with both 2-wire and 3-wire proximity sensors?
A: Yes. The module supports both 2-wire and 3-wire sensor wiring. The field devices must meet the specified 48 VDC input characteristics and switching thresholds.
Q: What is the difference between the BMXDDI1603 and a 24 VDC digital input module?
A: The BMXDDI1603 is designed for 48 VDC isolated input signals, with a sensor supply range of 36-60 VDC. It should not be selected as a direct substitute for a 24 VDC input module without checking field voltage, signal thresholds, and wiring requirements.
Q: Does the BMXDDI1603 support hot swapping?
A: The product specifications identify hot-swapping fallback as supported. The exact replacement procedure and applicable rack or controller operating conditions should be checked against the relevant Modicon X80 platform documentation.
Fizetés: T/T, Western Union.
Szállítási kikötő: Hsziamen.
Átfutási idő: Általában 1–3 munkanap a fizetés visszaigazolását követően (készlettől függően).
Világszintű szállítás: Ipari automatizálási alkatrészeket szállítunk ügyfeleinknek világszerte. A szállítási költséget az ajánlatkérésével együtt adjuk meg.
GYIK.
Gyakori kérdések az árajánlatokról, a szállításról, a garanciáról és a visszaküldésrőlA termékoldalon kattintson az Árajánlat kérése gombra, majd küldje el nekünk a cikkszámot, a szükséges mennyiséget és a célországot. Értékesítési csapatunk válaszol az aktuális elérhetőséggel, az árakkal és a várható szállítási idővel.
A raktáron lévő termékeket általában a fizetés és a rendelés visszaigazolása után készítjük elő. A legtöbb rendelést kínai raktárunkból küldjük ki, azonban a feladási hely az aktuális készlettől függően változhat.
Igen. Ipari automatizálási alkatrészeket szállítunk ügyfeleinknek világszerte. A szállítási költség és a szállítási idő a célállomástól, a csomag súlyától, a termék méretétől és a helyi importkövetelményektől függ.
Gyakran használjuk a DHL, FedEx, UPS és egyéb nemzetközi futárszolgálatokat. A fuvarozó a rendeltetési hely, a kézbesítés sebessége, a küldemény mérete és az ügyfél igényei alapján választható ki.
Termékeinkre általában 12 hónapos garancia vonatkozik. A jogosult termékek a 30 napos visszatérítési szabályzatunk alapján is visszaküldhetők. Bármely termék visszaküldése előtt lépjen kapcsolatba csapatunkkal az alkalmazandó feltételek és a visszaküldési útmutató megerősítése érdekében.
Ez is tetszhet Önnek
Blogbejegyzések
Ipari automatizálási hírek, műszaki útmutatók és termékfrissítések.
