
Értesítés e-mailben, amikor ez a termék elérhetővé válik
- Leírás
- Reviews
- Szállítás és fizetés
The Schneider Electric BMXDRC0805 is an 8-channel relay discrete output module in the Modicon X80 range. It provides isolated relay contacts with normally open (NO) and normally closed (NC) configurations for switching AC and DC loads. Its output voltage range covers 24 to 240 VAC and 24 to 125 VDC, making it suitable for integration into Modicon M340 and M580 local or remote I/O architectures.
Output Configuration and Operation
The BMXDRC0805 uses electromechanical relay outputs to switch external loads according to commands from the PLC. Its 8 isolated relay outputs provide complementary NO and NC contacts, allowing the output circuit to be configured according to the requirements of the connected equipment.
The module supports positive or negative output logic. The minimum switching current is 10 mA at 5 VDC. The specified response times are no more than 10 ms for activation and 13 ms for deactivation, which should be considered when evaluating output timing in the control sequence.
Electrical Characteristics and Protection
The output circuits support switching voltages from 24 to 240 VAC or 24 to 125 VDC. The actual load current capacity is not specified in the supplied data, so the connected load must be checked against the manufacturer's output current ratings before installation.
The module specifies external short-circuit, overload and inductive-load overvoltage protection requirements. Its insulation resistance is greater than 10 MOhm at 500 VDC, and its dielectric strength is 1780 VAC at 50/60 Hz for 1 minute.
PLC Integration and Installation
The BMXDRC0805 belongs to the Modicon X80 common I/O platform, which supports Modicon M340 and M580 PLC architectures, including local and remote I/O configurations. It is installed on the PLC rack and secured with two screws.
Electrical connections use a 40-way removable terminal block. Supported terminal block types include caged, screw-clamp and spring connections. The terminal block must be selected separately according to the required wiring arrangement.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | BMXDRC0805 |
| Brand | Schneider Electric |
| Product Type | Relay Discrete Output Module |
| Product Range | Modicon X80 |
| Number of Outputs | 8 |
| Output Type | Isolated relay outputs |
| Contact Configuration | NO / NC, complementary |
| Discrete Output Logic | Positive or negative |
| Output Switching Voltage | 24-240 VAC / 24-125 VDC |
| Minimum Switching Current | 10 mA at 5 VDC |
| Output Activation Time | 10 MOhm at 500 VDC |
| Dielectric Strength | 1780 VAC, 50/60 Hz, 1 min |
| Protection Requirements | External short-circuit, overload and inductive-load overvoltage protection |
| Mounting | Modicon X80 rack, secured with 2 screws |
| Connection | 40-way removable terminal block |
| Terminal Block Types | Caged, screw-clamp or spring |
| Protection Rating | IP20 |
| Operating Temperature | 0 to 60 deg C |
| Relative Humidity | 5-95%, non-condensing |
| Dimensions (W x D x H) | 32 x 100 x 86 mm |
| Net Weight | 0.189 kg |
| Certifications | CE, UL, CSA, RCM, EAC, UKCA, Merchant Navy |
| Standards | EN 61000-6-5, EN 61850-3, EN 61131-2 |
| Country of Origin | USA |
| GTIN | 3606489485061 |
Frequently Asked Questions
Q: Which PLC platforms support the BMXDRC0805?
A: The BMXDRC0805 is designed for Modicon M340 and Modicon M580 PLC architectures. It supports both local and remote I/O configurations within the Modicon X80 platform.
Q: What terminal block is required for the BMXDRC0805?
A: The module uses a 40-way removable terminal block. Caged, screw-clamp and spring-type connections are specified as supported options. The appropriate terminal block must be selected for the installation.
Q: Can the BMXDRC0805 switch both AC and DC loads?
A: Yes. Its relay outputs support 24-240 VAC and 24-125 VDC switching voltages. However, the load current rating must also be checked against the manufacturer's specifications before connecting field devices.
Fizetés: T/T, Western Union.
Szállítási kikötő: Hsziamen.
Átfutási idő: Általában 1–3 munkanap a fizetés visszaigazolását követően (készlettől függően).
Világszintű szállítás: Ipari automatizálási alkatrészeket szállítunk ügyfeleinknek világszerte. A szállítási költséget az ajánlatkérésével együtt adjuk meg.
GYIK.
Gyakori kérdések az árajánlatokról, a szállításról, a garanciáról és a visszaküldésrőlA termékoldalon kattintson az Árajánlat kérése gombra, majd küldje el nekünk a cikkszámot, a szükséges mennyiséget és a célországot. Értékesítési csapatunk válaszol az aktuális elérhetőséggel, az árakkal és a várható szállítási idővel.
A raktáron lévő termékeket általában a fizetés és a rendelés visszaigazolása után készítjük elő. A legtöbb rendelést kínai raktárunkból küldjük ki, azonban a feladási hely az aktuális készlettől függően változhat.
Igen. Ipari automatizálási alkatrészeket szállítunk ügyfeleinknek világszerte. A szállítási költség és a szállítási idő a célállomástól, a csomag súlyától, a termék méretétől és a helyi importkövetelményektől függ.
Gyakran használjuk a DHL, FedEx, UPS és egyéb nemzetközi futárszolgálatokat. A fuvarozó a rendeltetési hely, a kézbesítés sebessége, a küldemény mérete és az ügyfél igényei alapján választható ki.
Termékeinkre általában 12 hónapos garancia vonatkozik. A jogosult termékek a 30 napos visszatérítési szabályzatunk alapján is visszaküldhetők. Bármely termék visszaküldése előtt lépjen kapcsolatba csapatunkkal az alkalmazandó feltételek és a visszaküldési útmutató megerősítése érdekében.
Ez is tetszhet Önnek
Blogbejegyzések
Ipari automatizálási hírek, műszaki útmutatók és termékfrissítések.
