
Értesítés e-mailben, amikor ez a termék elérhetővé válik
- Leírás
- Reviews
- Szállítás és fizetés
The Schneider Electric BMXEHC0200H is a hardened high-speed counter module for the Modicon M340 automation platform. It provides two independent high-speed counting channels for processing signals from proximity sensors and incremental encoders. The module supports counting frequencies up to 60 kHz and includes configurable counting functions, auxiliary inputs, and two discrete outputs for counter-related control operations.
High-Speed Counting and Signal Processing
The BMXEHC0200H provides two high-speed counter channels, each designed to process external pulse signals. It accepts signals from 2-wire or 3-wire proximity sensors operating at 19.2-30 V DC, incremental encoders with push-pull outputs, and 10-30 V DC totem-pole devices.
Its counting functions support different measurement and control requirements:
- Ratio counting and event counting.
- Frequency measurement.
- Up/down counting.
- 32-bit counter operation.
- Loop (modulo) counting.
- Time-period measurement.
- Width modulation.
The 1 ms cycle time supports periodic counter processing. The maximum counting frequency of 60 kHz defines the upper input pulse frequency supported by the module.
Input and Output Configuration
The module provides six inputs in total: three high-speed inputs and three auxiliary inputs. The input interface supports 24 V DC Type 3 signals, with defined voltage and current thresholds for reliable state recognition.
Two discrete outputs are available, with positive or negative logic configurable. Integrated overload and short-circuit protection provides electrical protection for the output circuits.
The output functions can be used in counter-related control operations. Actual load selection must account for the per-output current limit, module-level current limit, output voltage range, and load-current specifications.
Hardened Design for Severe Environments
The BMXEHC0200H belongs to the Modicon X80 common I/O platform and features conformal coating for operation in more demanding environmental conditions. Its specified operating temperature range is -25 to +70 deg C, with IP20 protection for the electronic assembly.
The environmental specifications include resistance classifications for gases, dust, sand, mold growth, and fungal spores. These characteristics are relevant when evaluating the module for installations exposed to industrial contaminants.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | BMXEHC0200H |
| Brand | Schneider Electric |
| Product Type | Hardened High-Speed Counter Module |
| Product Range | Modicon X80 |
| Automation Platform | Modicon M340 |
| Application | Severe environments |
| Number of Channels | 2 |
| Maximum Counting Frequency | 60 kHz |
| Number of Inputs | 6 |
| High-Speed Inputs | 3 |
| Auxiliary Inputs | 3 |
| Input Voltage | 24 V DC, Type 3 |
| Input Compatibility | 19.2-30 V DC 2-wire/3-wire proximity sensors; incremental encoders with push-pull outputs; 10-30 V DC totem-pole signals |
| Input Current | 2 mA at 11 V |
| Voltage State 1 Guaranteed | 11-30 V DC |
| Current State 1 Guaranteed | Greater than 2 mA at U >= 11 V |
| Voltage State 0 Guaranteed | Less than 5 V DC |
| Current State 0 Guaranteed | Less than 1.5 mA |
| Number of Outputs | 2 |
| Output Voltage | 24 V DC |
| Output Voltage Limits | 19.2-30 V |
| Discrete Output Logic | Positive or negative configurable |
| Maximum Output Current | 2 A per module; 0.5 A per output |
| Maximum Load Current | 1 A per module; 0.5 A per output |
| Maximum Leakage Current | 0.1 mA at state 0 |
| Maximum Voltage Drop | Less than 3 V at state 1 |
| Output Overload Protection | Integrated |
| Output Short-Circuit Protection | Integrated, 1.5 A |
| Overlap Time | 0.2 ms |
| Counter Cycle Time | 1 ms |
| Counter Functions | Ratio count, frequency meter, down counting, 32-bit counting, modulo counting, time-period measurement, event counting, width modulation |
| Isolation Voltage | 1500 V for 60 s |
| Current Consumption | 200 mA at 3.3 V DC bus |
| Rack Current Consumption | 40 mA at 24 V DC rack |
| Sensor Power Consumption | 80 mA at 24 V DC sensor supply |
| Electrical Connections | 1 x 10-pin connector for auxiliary inputs and sensor power; 2 x 16-pin connectors for counter channel sensors |
| Module Format | Standard |
| Protective Treatment | Conformal coating |
| Operating Temperature | -25 to +70 deg C |
| Relative Humidity | 10-95%, non-condensing |
| Protection Rating | IP20 |
| Environmental Classification | Gx ISA S71.04; 3C4, 3S4 and 3B2 IEC 60721-3-3 |
| Hazardous Location Classification | Class I, Division 2 |
| Product Certifications | CE, UL, CSA, RCM, EAC |
| Standards | IEC 61131-2, IEC 61010-2-201, UL 61010-2-201, CSA C22.2 No. 61010-2-201, IACS E10 |
| Net Weight | 0.112 kg |
| Country of Origin | USA |
| GTIN | 3595864010410 |
Installation and Electrical Connections
The BMXEHC0200H is installed on the Modicon X80 rack and secured using two screws. Its three dedicated connectors separate the auxiliary input and sensor power wiring from the sensor connections for counter channels 0 and 1.
When preparing the wiring, verify the sensor output type, voltage levels, and input state thresholds. For output circuits, check both the 0.5 A per-output limit and the 1 A maximum module load current.
Frequently Asked Questions
Q: What is the difference between the two counter channels and the six inputs?
A: The module has two high-speed counter channels and six physical inputs in total. These comprise three high-speed inputs and three auxiliary inputs. The six-input configuration should not be interpreted as six independent high-speed counting channels.
Q: Which sensor types can be connected to the BMXEHC0200H?
A: The module supports 19.2-30 V DC 2-wire and 3-wire proximity sensors, incremental encoders with push-pull outputs, and 10-30 V DC totem-pole signals. The selected sensor must also meet the specified input voltage and current thresholds.
Q: Can the module operate in high-temperature industrial environments?
A: Yes. The specified operating temperature range is -25 to +70 deg C. Its conformal coating and environmental resistance classifications support applications in severe environments, subject to the specified installation and operating conditions.
Fizetés: T/T, Western Union.
Szállítási kikötő: Hsziamen.
Átfutási idő: Általában 1–3 munkanap a fizetés visszaigazolását követően (készlettől függően).
Világszintű szállítás: Ipari automatizálási alkatrészeket szállítunk ügyfeleinknek világszerte. A szállítási költséget az ajánlatkérésével együtt adjuk meg.
GYIK.
Gyakori kérdések az árajánlatokról, a szállításról, a garanciáról és a visszaküldésrőlA termékoldalon kattintson az Árajánlat kérése gombra, majd küldje el nekünk a cikkszámot, a szükséges mennyiséget és a célországot. Értékesítési csapatunk válaszol az aktuális elérhetőséggel, az árakkal és a várható szállítási idővel.
A raktáron lévő termékeket általában a fizetés és a rendelés visszaigazolása után készítjük elő. A legtöbb rendelést kínai raktárunkból küldjük ki, azonban a feladási hely az aktuális készlettől függően változhat.
Igen. Ipari automatizálási alkatrészeket szállítunk ügyfeleinknek világszerte. A szállítási költség és a szállítási idő a célállomástól, a csomag súlyától, a termék méretétől és a helyi importkövetelményektől függ.
Gyakran használjuk a DHL, FedEx, UPS és egyéb nemzetközi futárszolgálatokat. A fuvarozó a rendeltetési hely, a kézbesítés sebessége, a küldemény mérete és az ügyfél igényei alapján választható ki.
Termékeinkre általában 12 hónapos garancia vonatkozik. A jogosult termékek a 30 napos visszatérítési szabályzatunk alapján is visszaküldhetők. Bármely termék visszaküldése előtt lépjen kapcsolatba csapatunkkal az alkalmazandó feltételek és a visszaküldési útmutató megerősítése érdekében.
Ez is tetszhet Önnek
Blogbejegyzések
Ipari automatizálási hírek, műszaki útmutatók és termékfrissítések.
