Ugrás a termékinformációhoz
1 ból 3

Schneider Electric BMXFTA300 Modicon X80 Prefabricated Cable Assembly

18 készleten
  • Manufacturer: Schneider
  • Product No.: BMXFTA300
  • Country of origin: France
  • Product Type: Modicon X80 Prefabricated Cable Assembly
  • Condition: Teljesen új
  • Payment: T/T, Western Union
  • Weight: 0.5 kg
  • Shipping port: Hsziamen
  • Warranty: 12 hónap
  • Leírás
  • Reviews
  • Szállítás és fizetés

The Schneider Electric BMXFTA300, also cataloged as the BMXFTA300 prefabricated cable assembly, provides the electrical connection between Modicon M340 I/O modules and Advantys Telefast ABE 7 terminal blocks. It uses a 28-pin removable terminal block connector on the module side and a 25-pin SUB-D connector on the terminal block side, with a cable length of 3 m.

Hardware Specifications

Parameter Specification
Model BMXFTA300
Brand Schneider Electric
Product Series Modicon X80
Product Type Prefabricated Cable Assembly
Accessory Type Preformed Cable Set
Weight 0.5 kg
Cable Length 3 m
Module-Side Connection 1 removable 28-pin terminal block
Terminal Block-Side Connection 1 SUB-D 25-pin connector
Connector Configuration 28-pin terminal block to 25-pin SUB-D
Compatible I/O Modules BMXAMI0800, BMXAMI0810
Compatible Terminal Blocks ABE7CPA02, ABE7CPA03, ABE7CPA31, ABE7CPA31/E
Packaging Quantity 1 unit
EAN 3595864080451

I/O Connection Architecture and Compatibility

The BMXFTA300 provides a preassembled electrical interface between Modicon M340 analog I/O modules and Advantys Telefast ABE 7 connection systems.

Its connection arrangement consists of:

  • Module side: A removable 28-pin terminal block connects to the I/O module.
  • Terminal block side: A 25-pin SUB-D connector connects to the ABE 7 terminal block.
  • Cable assembly: A fixed 3 m cable carries the corresponding electrical connections between both interfaces.

The cable is specified for the BMXAMI0800 and BMXAMI0810 analog input modules. Compatibility also includes the ABE7CPA02, ABE7CPA03, ABE7CPA31, and ABE7CPA31/E terminal block references.

For system integration, connector pin assignments and channel wiring must correspond to the selected I/O module and terminal block configuration.

Frequently Asked Questions

Q: Can the BMXFTA300 be used with both BMXAMI0800 and BMXAMI0810?

A: Yes. Both analog input modules are explicitly listed as compatible products. The cable provides the 28-pin terminal block interface required on the module side.

Q: Does the BMXFTA300 support hot-swapping?

A: Hot-swapping capability is not specified for this cable assembly. Disconnect the associated electrical circuits and follow the module manufacturer's maintenance procedure before removing or installing connectors.

Q: What should be checked when replacing an existing BMXFTA300?

A: Verify the 28-pin removable terminal block, 25-pin SUB-D connector, 3 m cable length, and compatibility with the installed ABE 7 terminal block. Check connector condition and wiring continuity before returning the I/O circuit to service.

Field Installation Guidelines

1. Connector Verification: Confirm that the 28-pin removable terminal block matches the designated Modicon I/O module interface and that the 25-pin SUB-D connector matches the ABE 7 terminal block.

2. Cable Routing: Route the 3 m cable away from high-voltage power conductors, motor cables, and sources of electromagnetic interference where practical.

3. Mechanical Installation: Avoid excessive bending, tensile loading, twisting, or compression of the cable. Secure the assembly to prevent connector strain.

4. Electrical Inspection: Inspect connector contacts for oxidation, contamination, or mechanical damage before installation.

5. Shielding and Grounding: Follow the module and terminal block installation documentation for cable shielding and grounding arrangements. Do not assume an undocumented shield termination configuration.

6. Commissioning: Verify connector engagement, wiring continuity, channel correspondence, and analog input signal readings before placing the associated control loop into operation.

Fizetés: T/T, Western Union.

Szállítási kikötő: Hsziamen.

Átfutási idő: Általában 1–3 munkanap a fizetés visszaigazolását követően (készlettől függően).

Világszintű szállítás: Ipari automatizálási alkatrészeket szállítunk ügyfeleinknek világszerte. A szállítási költséget az ajánlatkérésével együtt adjuk meg.

GYIK.

Gyakori kérdések az árajánlatokról, a szállításról, a garanciáról és a visszaküldésről

A termékoldalon kattintson az Árajánlat kérése gombra, majd küldje el nekünk a cikkszámot, a szükséges mennyiséget és a célországot. Értékesítési csapatunk válaszol az aktuális elérhetőséggel, az árakkal és a várható szállítási idővel.

A raktáron lévő termékeket általában a fizetés és a rendelés visszaigazolása után készítjük elő. A legtöbb rendelést kínai raktárunkból küldjük ki, azonban a feladási hely az aktuális készlettől függően változhat.

Igen. Ipari automatizálási alkatrészeket szállítunk ügyfeleinknek világszerte. A szállítási költség és a szállítási idő a célállomástól, a csomag súlyától, a termék méretétől és a helyi importkövetelményektől függ.

Gyakran használjuk a DHL, FedEx, UPS és egyéb nemzetközi futárszolgálatokat. A fuvarozó a rendeltetési hely, a kézbesítés sebessége, a küldemény mérete és az ügyfél igényei alapján választható ki.

Termékeinkre általában 12 hónapos garancia vonatkozik. A jogosult termékek a 30 napos visszatérítési szabályzatunk alapján is visszaküldhetők. Bármely termék visszaküldése előtt lépjen kapcsolatba csapatunkkal az alkalmazandó feltételek és a visszaküldési útmutató megerősítése érdekében.

Products FAQs

Ez is tetszhet Önnek