
Értesítés e-mailben, amikor ez a termék elérhetővé válik
- Leírás
- Reviews
- Szállítás és fizetés
The Schneider Electric BMXNOM0200H is a rugged serial communication module in the Modicon X80 range, designed to provide two independent RS-232/RS-485 interfaces for Modbus RTU and ASCII communication. It supports serial connections to external devices through RJ45 ports and features a protective coating for operation in demanding industrial environments. Its extended operating temperature range and compatibility with Modicon M340 and M580 PLC platforms support its use in different automation architectures.
Serial Communication Interfaces
The BMXNOM0200H provides two serial communication ports with different electrical interfaces and transmission rates:
- RS-232: RJ45 connection, 115.2 kbit/s, 8-wire interface.
- RS-485: RJ45 connection, 57.6 kbit/s, one twisted two-wire pair.
These interfaces allow the PLC system to exchange data with external equipment using supported serial communication protocols. Modbus RTU uses binary data frames, while ASCII mode uses character-based message representation. The two interfaces provide separate connection points for serial communication devices.
Power Supply and Status Indication
The module receives its operating power internally through the module rack, rather than requiring a separate external power supply. Its current consumption is 80 mA at 24 V DC.
Four LEDs provide local diagnostic information:
- ERR: Red LED indicating a module fault.
- RUN: Green LED indicating normal module operation.
- SER COM 0: Green LED indicating activity on serial port 0.
- SER COM 1: Green LED indicating activity on serial port 1.
These indicators help maintenance personnel distinguish module operating status from serial communication activity during troubleshooting.
Rugged Design and Environmental Protection
The BMXNOM0200H features a protective coating intended for installations exposed to chemically aggressive environments. Its environmental specifications include resistance classifications for gases, dust, sand, salt, mould and fungal spores.
The module supports an operating temperature range of -25 to 70 deg C and relative humidity of 10-95%, provided that condensation does not occur. Its IP20 enclosure rating is intended for installation inside a suitable protected electrical cabinet.
PLC Platform Compatibility
The BMXNOM0200H belongs to the Modicon X80 common module platform and is specified for use with Modicon M340 and M580 PLC systems. The shared X80 hardware environment allows the serial communication module to be incorporated into these supported automation architectures.
The module is a standard-format X80 module. Its compatibility should be checked against the selected PLC configuration and rack arrangement before installation.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | BMXNOM0200H |
| Brand | Schneider Electric |
| Product Series | Modicon X80 |
| Product Type | Serial Communication Module |
| Application | Rugged industrial environments |
| Communication Interfaces | 2 serial ports |
| Port 0 Interface | RS-232 |
| Port 0 Connector | RJ45, 8-wire |
| Port 0 Transmission Rate | 115.2 kbit/s |
| Port 1 Interface | RS-485 |
| Port 1 Connector | RJ45, twisted two-wire pair |
| Port 1 Transmission Rate | 57.6 kbit/s |
| Communication Protocols | Modbus RTU, ASCII |
| Power Supply | Internal, through module rack |
| Current Consumption | 80 mA at 24 V DC |
| Protective Coating | Protective lacquer coating |
| Local Diagnostics | ERR, RUN, SER COM 0, SER COM 1 LEDs |
| Module Format | Standard |
| Compatible PLC Platforms | Modicon M340, Modicon M580 |
| Operating Temperature | -25 to 70 deg C |
| Relative Humidity | 10-95%, non-condensing |
| Protection Rating | IP20 |
| Gas Resistance | Class Gx, ISA S71.04 |
| Gas Resistance | Class 3C4, IEC 60721-3-3 |
| Dust Resistance | Class 3S4, IEC 60721-3-3 |
| Sand Resistance | Class 3S4, IEC 60721-3-3 |
| Salt Resistance | Level 2, IEC 68252 |
| Mould Resistance | Class 3B2, IEC 60721-3-3 |
| Fungal Spore Resistance | Class 3B2, IEC 60721-3-3 |
| Hazardous Area Classification | Class I, Division 2 |
| Product Certifications | CE, UL, CSA, RCM, EAC, Marine, ATEX, IECEx |
| Standards | IEC 61131-2, IEC 61010-2-201, UL 61010-2-201, CSA C22.2 No. 61010-2-201 |
| Additional Environmental Standards | IEC 61000-6-5, IEC 61850-3, IEC 60079-0, IACS E10 |
| EU Directives | 2014/35/EU, 2014/30/EU, 2014/34/EU |
| Protection Against Electromagnetic Disturbances | IEC 61000-6-2 |
| Weight | 0.23 kg |
| EAN | 3595864027388 |
| Lifecycle Carbon Footprint | 102 kg CO2 eq. |
Frequently Asked Questions
Q: What is the difference between the two serial ports on the BMXNOM0200H?
A: Port 0 uses RS-232 with an RJ45 connector and supports transmission rates up to 115.2 kbit/s. Port 1 uses RS-485 with an RJ45 connector and a twisted two-wire connection, supporting up to 57.6 kbit/s. These interfaces provide different electrical connection methods for serial communication equipment.
Q: Which PLC systems support the BMXNOM0200H?
A: The module is specified for Modicon M340 and Modicon M580 PLC platforms. It belongs to the shared Modicon X80 hardware range. The rack configuration and applicable hardware requirements should be checked before selecting the module.
Q: Does the BMXNOM0200H require a separate 24 V DC power supply?
A: No separate external supply is specified for the module itself. It receives power internally through the module rack and has a stated current consumption of 80 mA at 24 V DC.
Fizetés: T/T, Western Union.
Szállítási kikötő: Hsziamen.
Átfutási idő: Általában 1–3 munkanap a fizetés visszaigazolását követően (készlettől függően).
Világszintű szállítás: Ipari automatizálási alkatrészeket szállítunk ügyfeleinknek világszerte. A szállítási költséget az ajánlatkérésével együtt adjuk meg.
GYIK.
Gyakori kérdések az árajánlatokról, a szállításról, a garanciáról és a visszaküldésrőlA termékoldalon kattintson az Árajánlat kérése gombra, majd küldje el nekünk a cikkszámot, a szükséges mennyiséget és a célországot. Értékesítési csapatunk válaszol az aktuális elérhetőséggel, az árakkal és a várható szállítási idővel.
A raktáron lévő termékeket általában a fizetés és a rendelés visszaigazolása után készítjük elő. A legtöbb rendelést kínai raktárunkból küldjük ki, azonban a feladási hely az aktuális készlettől függően változhat.
Igen. Ipari automatizálási alkatrészeket szállítunk ügyfeleinknek világszerte. A szállítási költség és a szállítási idő a célállomástól, a csomag súlyától, a termék méretétől és a helyi importkövetelményektől függ.
Gyakran használjuk a DHL, FedEx, UPS és egyéb nemzetközi futárszolgálatokat. A fuvarozó a rendeltetési hely, a kézbesítés sebessége, a küldemény mérete és az ügyfél igényei alapján választható ki.
Termékeinkre általában 12 hónapos garancia vonatkozik. A jogosult termékek a 30 napos visszatérítési szabályzatunk alapján is visszaküldhetők. Bármely termék visszaküldése előtt lépjen kapcsolatba csapatunkkal az alkalmazandó feltételek és a visszaküldési útmutató megerősítése érdekében.
Ez is tetszhet Önnek
Blogbejegyzések
Ipari automatizálási hírek, műszaki útmutatók és termékfrissítések.
