Ugrás a termékinformációhoz
1 ból 3

Schneider Electric BMXNRP0201 Modicon X80 Fiber Optic Repeater

18 készleten
  • Manufacturer: Schneider
  • Product No.: BMXNRP0201
  • Country of origin: France
  • Product Type: Modicon X80 Fiber Optic Repeater
  • Condition: Teljesen új
  • Payment: T/T, Western Union
  • Weight: 203 g
  • Shipping port: Hsziamen
  • Warranty: 12 hónap
  • Leírás
  • Reviews
  • Szállítás és fizetés

The BMXNRP0201 is a Modicon X80 fiber optic repeater designed to extend Ethernet communication over single-mode optical fiber. It provides two 100BASE-TX RJ45 ports and two 100BASE-FX fiber ports, supporting optical transmission distances of up to 15 km at a wavelength of 1310 nm. The module operates on a 24 V supply and supports Ethernet communication in Modicon automation architectures.

Ethernet and Fiber Optic Communication

The BMXNRP0201 converts Ethernet communication between copper and optical fiber interfaces. Its two RJ45 ports support 100BASE-TX, while the two fiber ports support 100BASE-FX in accordance with IEEE 802.3u.

The single-mode fiber interface allows Ethernet links to extend beyond the distance limitations of conventional copper cabling. The specified operating distance is 0 to 15,000 m, making the module suitable for communication links between separated automation equipment where optical fiber is required.

Optical Interface Characteristics

The optical interface operates at 1310 nm and specifies attenuation of -15 to -8 dB for 9/125 um fiber. The receiver sensitivity range is -31 to -8 dBm, and the signal rise/fall time is 2.5 ns.

These optical parameters are relevant when checking fiber type, link attenuation and receiver operating conditions. The actual achievable transmission distance depends on the optical link budget and the characteristics of the installed fiber and connectors.

Power Supply and Status Indication

The module uses a rated supply voltage of 24 V. Its typical current consumption is 140 mA, with a maximum of 200 mA. Local LED indicators provide information about the power supply, fault status, Ethernet connections and fiber link activity.

  • 1 green LED for power supply status.
  • 1 red LED for fault indication (ERR).
  • 2 green LEDs for Ethernet link status.
  • 2 green LEDs for fiber connection status and activity.

Installation and System Integration

The BMXNRP0201 belongs to the Schneider Electric Modicon X80 range, which provides a common I/O and communication hardware platform for Modicon automation architectures. The module is specified for use with Modicon M340 and M580 systems.

It is installed in a module rack and secured with two screws. The product documentation also identifies Ethernet interlink cables as the connection method for CRA drop adapters. Its specified hot-swap capability supports module replacement within an appropriately configured system; the applicable rack and system replacement procedures should still be observed.

Technical Specifications

Parameter Specification
Model BMXNRP0201
Brand Schneider Electric
Product Type Fiber Optic Repeater
Product Series Modicon X80
Fiber Type Single-mode
Rated Voltage 24 V
Typical Current Consumption 140 mA
Maximum Current Consumption 200 mA
Copper Ethernet Ports 2 x RJ45, 100BASE-TX
Fiber Ethernet Ports 2 x 100BASE-FX
Ethernet Standard IEEE 802.3u
Optical Wavelength 1310 nm
Operating Distance 0-15,000 m
Optical Attenuation -15 to -8 dB (9/125 um)
Receiver Sensitivity -31 to -8 dBm
Rise/Fall Time 2.5 ns
Dielectric Strength 1400 V DC between field and bus; 500 V DC between channels
Hot-Swap Capability Supported
Protection Rating IP20
Dimensions (W x H x D) 32 x 100 x 86 mm
Weight 203 g
Operating Temperature 0 to 60 deg C
Storage Temperature -40 to 70 deg C
Relative Humidity 0 to 95%
Operating Altitude 0-4000 m
Environmental Carbon Footprint 167 kg CO2 eq.
Certifications CE, RCM, CSA, EAC, Merchant Navy, UL
Standards IEC 61010-2-201, IEC 61131-2, UL 61010-2-201, CSA C22.2 No. 61010-2-201
EAN 3595864144467

Frequently Asked Questions

Q: What is the difference between the BMXNRP0201 copper and fiber ports?

A: The two RJ45 ports provide 100BASE-TX Ethernet connections over copper, while the two 100BASE-FX ports provide Ethernet communication over single-mode optical fiber. This arrangement allows copper-based Ethernet equipment to communicate through an optical link.

Q: What fiber type and wavelength does the BMXNRP0201 require?

A: The specified fiber type is single-mode, with a nominal wavelength of 1310 nm and optical attenuation parameters based on 9/125 um fiber. Fiber and connector specifications should be checked against the optical link requirements.

Q: Does the BMXNRP0201 support hot swapping?

A: Yes. Schneider Electric lists hot swap as an available function for this module. Replacement must follow the applicable Modicon X80 rack and system procedures.

Fizetés: T/T, Western Union.

Szállítási kikötő: Hsziamen.

Átfutási idő: Általában 1–3 munkanap a fizetés visszaigazolását követően (készlettől függően).

Világszintű szállítás: Ipari automatizálási alkatrészeket szállítunk ügyfeleinknek világszerte. A szállítási költséget az ajánlatkérésével együtt adjuk meg.

GYIK.

Gyakori kérdések az árajánlatokról, a szállításról, a garanciáról és a visszaküldésről

A termékoldalon kattintson az Árajánlat kérése gombra, majd küldje el nekünk a cikkszámot, a szükséges mennyiséget és a célországot. Értékesítési csapatunk válaszol az aktuális elérhetőséggel, az árakkal és a várható szállítási idővel.

A raktáron lévő termékeket általában a fizetés és a rendelés visszaigazolása után készítjük elő. A legtöbb rendelést kínai raktárunkból küldjük ki, azonban a feladási hely az aktuális készlettől függően változhat.

Igen. Ipari automatizálási alkatrészeket szállítunk ügyfeleinknek világszerte. A szállítási költség és a szállítási idő a célállomástól, a csomag súlyától, a termék méretétől és a helyi importkövetelményektől függ.

Gyakran használjuk a DHL, FedEx, UPS és egyéb nemzetközi futárszolgálatokat. A fuvarozó a rendeltetési hely, a kézbesítés sebessége, a küldemény mérete és az ügyfél igényei alapján választható ki.

Termékeinkre általában 12 hónapos garancia vonatkozik. A jogosult termékek a 30 napos visszatérítési szabályzatunk alapján is visszaküldhetők. Bármely termék visszaküldése előtt lépjen kapcsolatba csapatunkkal az alkalmazandó feltételek és a visszaküldési útmutató megerősítése érdekében.

Products FAQs

Ez is tetszhet Önnek