Ir para as informações do produto
1 de 3

GE IC200ALG320E VersaMax Analog Output Module

11 em stock
  • Manufacturer: General Electric
  • Product No.: IC200ALG320E
  • Product Type: VersaMax Analog Output Module
  • Condition: Completamente novo
  • Payment: T/T, Western Union
  • Weight: 0.2 kg
  • Shipping port: Xiamen
  • Warranty: 12 meses
  • Descrição
  • Reviews
  • Envio e pagamento

The GE IC200ALG320E is a 12-bit analog current output module for the VersaMax distributed I/O system. It provides four single-ended output channels, each delivering a 4-20 mA signal to external control devices. The module uses an external DC supply for its field-side outputs and supports selectable output behavior when normal backplane communication or power is interrupted.

Output Function and Signal Processing

The IC200ALG320E converts digital output data received from the VersaMax CPU or Network Interface Unit (NIU) into analog current signals. Its four output channels operate as current-sourcing outputs and are arranged in one group.

The 4-20 mA signal range supports analog control loops connected to devices such as positioners, control valves, and other current-operated equipment. Each channel receives its own output data, allowing the controller to command multiple field devices through one module.

Output Configuration and Failure Behavior

The module provides a jumper-selectable response for conditions such as loss of backplane power, interruption of communication, or a stopped controller. The outputs can be configured to return to a default value of 4 mA or hold their last output state.

This setting determines how connected equipment responds when normal output updates are unavailable. The configured behavior should therefore be checked before replacing an existing module, particularly where the analog output controls a process actuator.

Technical Specifications

Parameter Specification
Model IC200ALG320E
Brand GE
Series VersaMax
Product Type Analog Output Module
Number of Channels 4
Channel Configuration Single-ended, one group
Output Signal Current
Output Range 4-20 mA
Resolution 4 uA = 8 counts
Update Rate 0.3 ms maximum
Accuracy at 25 deg C +/-0.3% typical of full scale; +/-0.5% maximum
External Power Supply 18-30 VDC, including ripple
External Current Consumption 160 mA maximum, including load current
Backplane Current Consumption 50 mA maximum at 5 V
Output Default Configuration 4 mA or hold last state
LED Indicators FLD PWR, OK
Dimensions 10.9 x 6.4 x 5.8 cm
Weight 0.2 kg

Revision E Identification

The suffix E identifies a revision of the original IC200ALG320 module. Revision E features an improved latching mechanism compared with earlier versions. When sourcing a replacement, check the complete catalog number and mechanical retention arrangement rather than identifying the module only by its base number.

Installation and Field Wiring

The module requires a VersaMax I/O carrier and an external 18-30 VDC supply for its output circuits. Shielded twisted-pair cable is recommended for analog field connections to help limit electrical interference in the current signal wiring.

The FLD PWR LED indicates the presence of field-side power, while the OK LED indicates that backplane power is recognized. These indicators help distinguish a field power issue from a backplane power issue during maintenance.

Frequently Asked Questions

Q: What is the difference between IC200ALG320E and IC200ALG320?

A: Both belong to the same four-channel, 12-bit, 4-20 mA analog output module family. The IC200ALG320E is Revision E and features an improved latching mechanism.

Q: What happens to the outputs if backplane communication is interrupted?

A: The outputs follow the configured jumper setting. They can return to the 4 mA default value or retain their last output state. Verify the existing configuration before replacing the module.

Q: Does the IC200ALG320E require an external power supply?

A: Yes. Its analog output circuits require an external 18-30 VDC supply. The module also draws current from the 5 V backplane supply, so both power requirements must be considered when checking the installation.

Pagamento: T/T, Western Union.

Porto de expedição: Xiamen.

Prazo de entrega: Normalmente, 1–3 dias úteis após a confirmação do pagamento (sujeito à disponibilidade em stock).

Entrega mundial: Enviamos peças de automação industrial para clientes em todo o mundo. Os custos de transporte são indicados no seu pedido de cotação.

Perguntas frequentes

Perguntas frequentes sobre orçamentos, envio, garantia e devoluções

Clique em Solicitar um orçamento na página do produto e envie-nos o número da peça, a quantidade necessária e o país de destino. A nossa equipa de vendas responderá com a disponibilidade atual, o preço e o prazo de entrega estimado.

Os artigos disponíveis em stock são normalmente preparados após o pagamento e a confirmação da encomenda. A maioria das encomendas é expedida do nosso armazém na China, embora o local de expedição possa variar consoante o stock disponível.

Sim. Enviamos peças de automação industrial para clientes em todo o mundo. O custo de envio e o tempo de trânsito dependem do destino, do peso da encomenda, do tamanho do produto e dos requisitos de importação locais.

Utilizamos habitualmente os serviços de correio expresso internacionais DHL, FedEx, UPS e outros. O transportador pode ser selecionado de acordo com o destino, a rapidez de entrega, o tamanho do envio e os requisitos do cliente.

Os nossos produtos estão geralmente cobertos por uma garantia de 12 meses. Os produtos elegíveis também podem ser devolvidos ao abrigo da nossa política de reembolso de 30 dias. Contacte a nossa equipa antes de devolver qualquer artigo para confirmar os termos aplicáveis e as instruções de devolução.

Products FAQs

Também poderá gostar de