
Notificado por e-mail quando este produto estiver disponível
- Descrição
- Reviews
- Envio e pagamento
The Schneider Electric BMXCPS3020 is an isolated DC power supply module in the Modicon X80 range. It supplies power to a Modicon X80 I/O rack and its installed modules, providing separate 24 VDC and 3.3 VDC secondary outputs for the I/O and processor supply and the rack logic supply. It accepts an isolated 24-48 VDC input and includes secondary-circuit overload, overvoltage, and short-circuit protection.
Power Supply Function
The BMXCPS3020 converts its DC input into the secondary power required by the X80 rack. Its outputs serve two different functions:
- 24 VDC output: Supplies the I/O modules and processor, with a rated secondary power of 31.2 W.
- 3.3 VDC output: Supplies I/O module logic, with a rated secondary power of 15 W.
Separating these output functions allows the rack to supply both module operating power and internal logic power. The maximum power dissipation of the module is 8.5 W.
Input and Protection
The module accepts an isolated DC input with a nominal voltage range of 24-48 VDC. The specified primary voltage limits are 18-62.4 VDC, providing the permitted input operating range.
The protection functions differ between the primary and secondary circuits. The primary circuit has an internal fuse that is not accessible, while the secondary circuit includes overload, overvoltage, and short-circuit protection for the 24 V sensor supply.
The specified inrush current is 30 A at 24 VDC and 60 A at 48 VDC. These values should be considered when evaluating upstream DC power supply capacity and input circuit protection.
Electrical Connections and Indicators
The BMXCPS3020 provides separate connectors for power input and alarm relay connections:
- One 5-pin connector for the power supply input and protective earth.
- One 2-pin connector for the alarm relay.
- One green LED indicating that rack voltage is OK.
- One RESET push button for a cold start.
The maximum specified cable distance between devices depends on the copper conductor cross-section: 10 m with 1.5 mm2 cable or 15 m with 2.5 mm2 cable.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | BMXCPS3020 |
| Brand | Schneider Electric |
| Product Type | Modicon X80 Power Supply Module |
| Product Range | Modicon X80 |
| Input Voltage | 24-48 VDC, isolated |
| Primary Voltage Limits | 18-62.4 VDC |
| Input Current | 0.83 A at 48 VDC; 1.65 A at 24 VDC |
| Secondary Power - 24 VDC | 31.2 W |
| Secondary Power - 3.3 VDC | 15 W |
| Secondary Current - 24 VDC | 1.3 A |
| Secondary Current - 3.3 VDC | 4.5 A |
| Inrush Current | 30 A at 24 VDC; 60 A at 48 VDC |
| I2t at Power-On | 1 A2.s at 24 VDC; 3 A2.s at 48 VDC |
| Power-On Charge | 0.2 A.s at 24 VDC; 0.3 A.s at 48 VDC |
| Maximum Power Dissipation | 8.5 W |
| MTBF | 4,600,000 h |
| Primary Circuit Protection | Internal, non-accessible fuse |
| Secondary Circuit Protection | Overload, overvoltage and short-circuit protection |
| LED Indicator | Green - rack voltage OK |
| Reset Function | Cold-start RESET button |
| Electrical Connections | 1 x 5-pin power connector; 1 x 2-pin alarm relay connector |
| Maximum Cable Distance | 10 m with 1.5 mm2 copper cable; 15 m with 2.5 mm2 copper cable |
| Power Interruption Immunity | 1 ms |
| Insulation Resistance | >= 10 MOhm, primary/earth and primary/secondary |
| Dielectric Strength | 1500 V, primary/earth and primary/secondary |
| Vibration Resistance | 3 Gn |
| Shock Resistance | 30 gn |
| Protection Rating | IP20 |
| Operating Temperature | 0 to 60 deg C |
| Storage Temperature | -40 to 85 deg C |
| Relative Humidity | 5-95% at 55 deg C, non-condensing |
| Protective Coating | TC |
| Operating Altitude | 0-2,000 m; derating required from 2,000 to 5,000 m |
| Weight | 0.34 kg |
| EAN | 3595863908985 |
| Lifecycle Carbon Footprint | 457 kg CO2 eq. |
Installation and Compatibility
The BMXCPS3020 is designed for installation in a Modicon X80 rack. It must be inserted into the module carrier and secured with two screws. Its stated backplane compatibility excludes the BMEXBP..02 backplane family.
The manufacturer specifies compatibility with Modicon X80 module carriers, subject to the stated backplane restriction. Before replacement, verify the installed rack reference and backplane type rather than relying solely on the X80 product family designation.
Standards and Certifications
The BMXCPS3020 is specified with the following certifications and standards:
- Certifications: CE, RCM, Merchant Navy, CSA, EAC and UL.
- Standards: EN 61131-2, EN 61000-6-4, EN 61000-6-2 and EN 61010-2-201.
- EU directives: 2014/35/EU (Low Voltage) and 2014/30/EU (Electromagnetic Compatibility).
Frequently Asked Questions
Q: What is the difference between the 24 VDC and 3.3 VDC outputs?
A: The 24 VDC output supplies the I/O modules and processor, with 31.2 W of rated power. The 3.3 VDC output supplies I/O module logic, with 15 W of rated power. Both outputs serve different power requirements within the X80 rack.
Q: Is the BMXCPS3020 compatible with all Modicon X80 backplanes?
A: No. The specified compatibility excludes BMEXBP..02 backplanes. Check the exact backplane reference before selecting this power supply for a rack replacement.
Q: What input voltage can the BMXCPS3020 accept?
A: Its nominal isolated DC input range is 24-48 VDC, with specified primary voltage limits of 18-62.4 VDC. The input current is 1.65 A at 24 VDC and 0.83 A at 48 VDC. Upstream power supply and protection selection should also account for its specified inrush current.
Pagamento: T/T, Western Union.
Porto de expedição: Xiamen.
Prazo de entrega: Normalmente, 1–3 dias úteis após a confirmação do pagamento (sujeito à disponibilidade em stock).
Entrega mundial: Enviamos peças de automação industrial para clientes em todo o mundo. Os custos de transporte são indicados no seu pedido de cotação.
Perguntas frequentes
Perguntas frequentes sobre orçamentos, envio, garantia e devoluçõesClique em Solicitar um orçamento na página do produto e envie-nos o número da peça, a quantidade necessária e o país de destino. A nossa equipa de vendas responderá com a disponibilidade atual, o preço e o prazo de entrega estimado.
Os artigos disponíveis em stock são normalmente preparados após o pagamento e a confirmação da encomenda. A maioria das encomendas é expedida do nosso armazém na China, embora o local de expedição possa variar consoante o stock disponível.
Sim. Enviamos peças de automação industrial para clientes em todo o mundo. O custo de envio e o tempo de trânsito dependem do destino, do peso da encomenda, do tamanho do produto e dos requisitos de importação locais.
Utilizamos habitualmente os serviços de correio expresso internacionais DHL, FedEx, UPS e outros. O transportador pode ser selecionado de acordo com o destino, a rapidez de entrega, o tamanho do envio e os requisitos do cliente.
Os nossos produtos estão geralmente cobertos por uma garantia de 12 meses. Os produtos elegíveis também podem ser devolvidos ao abrigo da nossa política de reembolso de 30 dias. Contacte a nossa equipa antes de devolver qualquer artigo para confirmar os termos aplicáveis e as instruções de devolução.
Também poderá gostar de
Publicações do blogue
Notícias sobre automação industrial, guias técnicos e atualizações de produtos.
