
Notificado por e-mail quando este produto estiver disponível
- Descrição
- Reviews
- Envio e pagamento
The Schneider Electric BMXCPS3020H is an isolated DC power supply module from the Modicon X80 range, designed for automation systems operating in extended-temperature and demanding environmental conditions. It accepts a 24-48 V DC primary supply and provides separate power outputs for I/O module logic and the processor. Its reinforced environmental protection supports operation from -25 to 70 deg C.
Power Supply and Output Configuration
The BMXCPS3020H converts the incoming DC supply into the secondary power required by the X80 backplane. It provides separate 24 V DC and 3.3 V DC outputs for the I/O module supply and processor, and I/O logic circuits, respectively.
The available output power depends on the operating temperature. At temperatures from 0 to 60 deg C, the module provides up to 31.2 W at 24 V DC and 15 W at 3.3 V DC. Across the extended -25 to 70 deg C range, these ratings are reduced to 23.4 W and 11.3 W, respectively. This derating must be considered when calculating the power budget of the installed rack.
Input Protection and Status Monitoring
The primary circuit has an internal fuse that is not accessible for replacement. The secondary circuit includes overload, overvoltage, and short-circuit protection for the 24 V sensor power supply connection.
A green LED indicates that the rack voltage is OK. The module also includes a RESET pushbutton for a cold start, allowing the power supply and associated rack operation to be restarted through the designated reset function.
Electrical Connections and Mounting
The module uses a 5-pin connector for the DC supply input and protective earth, together with a 2-pin connector for the alarm relay. The specified maximum cable distances between devices are 10 m with 1.5 mm2 copper cable or 15 m with 2.5 mm2 copper cable.
Installation requires mounting the power supply in a compatible X80 module rack and securing it with two screws. The module has an IP20 protection rating and a maximum power dissipation of 8.5 W.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | BMXCPS3020H |
| Brand | Schneider Electric |
| Product Range | Modicon X80 |
| Product Type | Ruggedized DC Power Supply Module |
| Primary Input Voltage | 24-48 V DC, isolated |
| Primary Voltage Limits | 18-62.4 V DC |
| Input Current | 1.65 A at 24 V DC; 0.83 A at 48 V DC |
| Total Secondary Power | Up to 31.2 W |
| Secondary Output Voltage | 24 V DC / 3.3 V DC |
| Output Current | 1.3 A at 24 V DC; 4.5 A at 3.3 V DC |
| Secondary Power at 0 to 60 deg C | 31.2 W at 24 V DC; 15 W at 3.3 V DC |
| Secondary Power at -25 to 70 deg C | 23.4 W at 24 V DC; 11.3 W at 3.3 V DC |
| Maximum Power Dissipation | 8.5 W |
| Inrush Current | 30 A at 24 V DC; 60 A at 48 V DC |
| Status Indicator | 1 green LED |
| Reset Function | Cold-start RESET pushbutton |
| Alarm Connection | 2-pin connector |
| Power Connection | 5-pin connector with protective earth |
| Primary Circuit Protection | Internal, non-accessible fuse |
| Secondary Circuit Protection | Overload, overvoltage and short-circuit protection |
| Backplane Compatibility | Not compatible with BMEXBP..02 |
| Protection Rating | IP20 |
| Insulation Resistance | >= 10 MOhm, primary/earth and primary/secondary |
| Dielectric Strength | 1500 V, primary/earth and primary/secondary |
| Vibration Resistance | 3 Gn |
| Shock Resistance | 30 gn |
| Operating Temperature | -25 to 70 deg C |
| Storage Temperature | -40 to 85 deg C |
| Relative Humidity | 5-95% at 55 deg C, non-condensing |
| Operating Altitude | 0-2,000 m; derating required from 2,000 to 5,000 m |
| MTBF | 4,600,000 hours |
| Environmental Protection | Protective coating |
| Weight | 0.34 kg |
| EAN | 3595864029771 |
Environmental Resistance and Certifications
The BMXCPS3020H is designed for environments requiring additional resistance to gas, dust, sand, salt and biological contaminants. Its environmental specifications include gas resistance class Gx according to ISA S71.04, gas resistance class 3C4, dust and sand resistance class 3S4, and mold resistance class 3B2 according to IEC 60721-3-3.
The specified certifications and standards include:
- Certifications: CE, UL, CSA, RCM, EAC, Merchant Navy, ATEX Zone 2/22 and IECEx Zone 2/22.
- Standards: IEC 61131-2, IEC 61010-2-201, UL 61010-2-201 and CSA C22.2 No. 61010-2-201.
- Additional environmental standards: EN/IEC 61000-6-5 and EN/IEC 61850-3.
- Hazardous location classification: Class I, Division 2.
Frequently Asked Questions
Q: What is the difference between BMXCPS3020H and BMXCPS3020?
A: Both models belong to the Modicon X80 DC power supply family and use a 24-48 V DC isolated primary supply. The H version is the hardened version, intended for extended environmental conditions, including an operating temperature range of -25 to 70 deg C. Their environmental and installation requirements should be checked separately.
Q: Can BMXCPS3020H be installed on a BMEXBP..02 backplane?
A: No. BMXCPS3020H is a standalone power supply and is not compatible with BMEXBP..02 redundant power supply backplanes. The rack configuration must be checked before replacement or installation.
Q: Does the BMXCPS3020H provide the same output power throughout its operating temperature range?
A: No. Its output power is derated at extended temperatures. At 0 to 60 deg C, the ratings are 31.2 W at 24 V DC and 15 W at 3.3 V DC. From -25 to 70 deg C, these ratings decrease to 23.4 W and 11.3 W, respectively.
Pagamento: T/T, Western Union.
Porto de expedição: Xiamen.
Prazo de entrega: Normalmente, 1–3 dias úteis após a confirmação do pagamento (sujeito à disponibilidade em stock).
Entrega mundial: Enviamos peças de automação industrial para clientes em todo o mundo. Os custos de transporte são indicados no seu pedido de cotação.
Perguntas frequentes
Perguntas frequentes sobre orçamentos, envio, garantia e devoluçõesClique em Solicitar um orçamento na página do produto e envie-nos o número da peça, a quantidade necessária e o país de destino. A nossa equipa de vendas responderá com a disponibilidade atual, o preço e o prazo de entrega estimado.
Os artigos disponíveis em stock são normalmente preparados após o pagamento e a confirmação da encomenda. A maioria das encomendas é expedida do nosso armazém na China, embora o local de expedição possa variar consoante o stock disponível.
Sim. Enviamos peças de automação industrial para clientes em todo o mundo. O custo de envio e o tempo de trânsito dependem do destino, do peso da encomenda, do tamanho do produto e dos requisitos de importação locais.
Utilizamos habitualmente os serviços de correio expresso internacionais DHL, FedEx, UPS e outros. O transportador pode ser selecionado de acordo com o destino, a rapidez de entrega, o tamanho do envio e os requisitos do cliente.
Os nossos produtos estão geralmente cobertos por uma garantia de 12 meses. Os produtos elegíveis também podem ser devolvidos ao abrigo da nossa política de reembolso de 30 dias. Contacte a nossa equipa antes de devolver qualquer artigo para confirmar os termos aplicáveis e as instruções de devolução.
Também poderá gostar de
Publicações do blogue
Notícias sobre automação industrial, guias técnicos e atualizações de produtos.
