Ir para as informações do produto
1 de 3

Schneider BMXCPS4022S Modicon X80 Safety Power Supply Module

18 em stock
  • Manufacturer: Schneider
  • Product No.: BMXCPS4022S
  • Country of origin: France
  • Product Type: Modicon X80 Safety Power Supply Module
  • Condition: Completamente novo
  • Payment: T/T, Western Union
  • Weight: 0.81 kg
  • Shipping port: Xiamen
  • Warranty: 12 meses
  • Descrição
  • Reviews
  • Envio e pagamento

The BMXCPS4022S is a Schneider Electric Modicon X80 safety power supply module designed for redundant power architectures in industrial automation systems. It accepts a 24-48 VDC primary supply and provides separate 24 VDC and 3.3 VDC secondary outputs for X80 I/O module logic and processor power. Network-based diagnostics provide information on redundancy status, operating time and remaining service life.

Power Supply Function and Redundant Architecture

The BMXCPS4022S supplies the internal power rails required by Modicon X80 system modules. Its two secondary supply outputs serve different electrical loads: the 24 VDC output supplies the I/O module power circuit, while the 3.3 VDC output supplies I/O module logic and processor circuitry.

The module supports redundant power architectures. Its diagnostic functions include redundancy testing and monitoring of remaining operating life, temperature and operating time. These functions provide maintenance information for assessing the power supply condition and planning replacement.

Electrical Protection and Status Monitoring

The secondary circuits incorporate overload, overvoltage and short-circuit protection. These protections address abnormal conditions on the module's output side; they should not be interpreted as a substitute for external protection of the primary supply circuit.

Three green LED indicators provide local status information:

  • Voltage OK: indicates that the required voltages are present.
  • Redundancy OK: indicates the redundancy status.
  • Power supply status: indicates the module's power supply condition.

A RESET button supports a cold restart. The module also provides an alarm relay connection for external status signalling.

Electrical Specifications

The output power allocation must be considered when calculating the rack power budget. The 40 W rating on the 24 VDC rail applies when the 3.3 VDC output is not loaded; the available power on both rails must remain within the module's total power capacity.

Parameter Specification
Model BMXCPS4022S
Brand Schneider Electric
Product Range Modicon X80
Product Type Safety Power Supply Module
Primary Voltage 24-48 VDC
Primary Voltage Limit 18-62.4 VDC
Supply Circuit DC
Input Current 1.9 A at 24 V; 1 A at 48 V
Inrush Current 60 A at 24 V; 60 A at 48 V
Secondary Output 1 3.3 VDC, 18 W
Secondary Output 2 24 VDC, 40 W
Secondary Current 5 A at 3.3 VDC; 1.67 A at 24 VDC
Maximum Power Dissipation 8.5 W
MTBF 721,000 hours
Primary Circuit Protection Internal, inaccessible fuse
Secondary Circuit Protection Overload, overvoltage and short-circuit protection
Electrical Connection 5-pin power supply connector and protective earth; 2-pin alarm relay connector
Reset Function Cold-start RESET pushbutton
Dielectric Strength 1,500 V primary/ground; 1,500 V primary/secondary
Insulation Resistance >= 100 MOhm primary/ground; >= 100 MOhm primary/secondary
Power Interruption Immunity 1 ms
Protection Rating IP20
Operating Temperature -25 to 60 deg C (source discrepancy; see editorial note)
Storage Temperature -40 to 85 deg C
Relative Humidity 5-95% at 55 deg C, non-condensing
Operating Altitude 0-2,000 m; derating required from 2,000 to 5,000 m
Vibration Resistance 3 Gn
Shock Resistance 15 Gn
Protective Treatment Conformal coating
Weight 0.81 kg
Certifications CE, UL, CSA, RCM, EAC, ATEX Zone 2/22, IECEx Zone 2/22, TÜV, Marine
Standards IEC 61131-2, IEC 61010-2-201, UL 61010-2-201, CSA C22.2 No. 61010-2-201, IACS E10
EAN 3606489562496

Installation and Electrical Connections

The BMXCPS4022S is designed for installation in a Modicon X80 module rack. It occupies the dedicated power supply position marked CPS and is secured to the rack using two screws.

The package includes two removable caged terminal blocks: one 5-way connector for the DC supply and protective earth, and one 2-way connector for the alarm relay. The module has an IP20 enclosure rating and is intended for installation inside a suitable equipment enclosure.

Environmental and Certification Requirements

The module has a conformal protective coating and specified resistance to gas, dust, sand, salt and mould-related environmental conditions. Its environmental classifications include gas resistance class Gx under ISA S71.04, class 3C4 under IEC 60721-3-3, and dust and sand resistance class 3S4.

The listed hazardous-location classifications include Class I Division 2, ATEX Zone 2/22 and IECEx Zone 2/22. Actual installation approval must be checked against the applicable certificate, equipment configuration and site requirements.

Frequently Asked Questions

Q: Can the BMXCPS4022S operate in a redundant power supply configuration?

A: Yes. It is designed for redundant power architectures and provides redundancy diagnostics, including redundancy testing and status monitoring. The system configuration must account for the power requirements of both supply modules.

Q: Can the 3.3 VDC and 24 VDC outputs deliver their maximum rated power simultaneously?

A: The output ratings must be evaluated against the total available power budget. The 40 W rating on the 24 VDC output applies when the 3.3 VDC output is not loaded. Do not calculate the two output ratings as independent power capacities.

Q: What does the RESET button do on this module?

A: The RESET button initiates a cold restart of the rack. This reinitializes the rack modules and, when installed in the main local rack, also reinitializes the CPU. The operation can cause I/O modules to transition to their initialized state, so its use should be coordinated with the control system operating procedure.

Pagamento: T/T, Western Union.

Porto de expedição: Xiamen.

Prazo de entrega: Normalmente, 1–3 dias úteis após a confirmação do pagamento (sujeito à disponibilidade em stock).

Entrega mundial: Enviamos peças de automação industrial para clientes em todo o mundo. Os custos de transporte são indicados no seu pedido de cotação.

Perguntas frequentes

Perguntas frequentes sobre orçamentos, envio, garantia e devoluções

Clique em Solicitar um orçamento na página do produto e envie-nos o número da peça, a quantidade necessária e o país de destino. A nossa equipa de vendas responderá com a disponibilidade atual, o preço e o prazo de entrega estimado.

Os artigos disponíveis em stock são normalmente preparados após o pagamento e a confirmação da encomenda. A maioria das encomendas é expedida do nosso armazém na China, embora o local de expedição possa variar consoante o stock disponível.

Sim. Enviamos peças de automação industrial para clientes em todo o mundo. O custo de envio e o tempo de trânsito dependem do destino, do peso da encomenda, do tamanho do produto e dos requisitos de importação locais.

Utilizamos habitualmente os serviços de correio expresso internacionais DHL, FedEx, UPS e outros. O transportador pode ser selecionado de acordo com o destino, a rapidez de entrega, o tamanho do envio e os requisitos do cliente.

Os nossos produtos estão geralmente cobertos por uma garantia de 12 meses. Os produtos elegíveis também podem ser devolvidos ao abrigo da nossa política de reembolso de 30 dias. Contacte a nossa equipa antes de devolver qualquer artigo para confirmar os termos aplicáveis e as instruções de devolução.

Products FAQs

Também poderá gostar de