Ir para as informações do produto
1 de 3

Schneider BMXDAI1615 Modicon X80 Discrete Input Module

18 em stock
  • Manufacturer: Schneider
  • Product No.: BMXDAI1615
  • Country of origin: France
  • Product Type: Modicon X80 Discrete Input Module
  • Condition: Completamente novo
  • Payment: T/T, Western Union
  • Weight: 0.157 kg
  • Shipping port: Xiamen
  • Warranty: 12 meses
  • Descrição
  • Reviews
  • Envio e pagamento

The Schneider Electric BMXDAI1615 is a 16-channel isolated AC discrete input module in the Modicon X80 range. It accepts 200-240 V AC field signals and transfers their status to the PLC through the X80 backplane. Capacitive input circuits, individual channel diagnostics and 10 ms activation response make it suitable for monitoring AC switching signals and compatible two-wire proximity sensors.

Input Configuration and Signal Characteristics

The BMXDAI1615 provides 16 electrically isolated input channels for AC signal acquisition. Its capacitive input design supports two-wire proximity sensors conforming to IEC 60947-5-2 and IEC 61131-2 Type 1.

The input thresholds distinguish valid ON and OFF states:

  • State 1: at least 164 V AC and 3 mA.
  • State 0: no more than 40 V AC and 2 mA.
  • Input impedance: 28 kOhm.
  • Input frequency: 47-63 Hz.
  • Sensor supply range: 170-264 V.
  • Maximum channel input voltage: 264 Vrms at 63 Hz.

The sensor voltage monitoring function identifies a sensor supply condition below 80 V AC as a fault and above 170 V AC as OK. These thresholds provide additional information for diagnosing field supply conditions.

Response Time and Electrical Isolation

The AC input response time is 10 ms for activation and 20 ms for deactivation. These values define the delay between a field signal transition and its recognition by the input module.

Channel-to-channel and channel-to-bus isolation are rated at 1780 Vrms for one minute. Insulation resistance is greater than 10 MOhm at 500 V DC. The module has a power dissipation of 5 W and a typical current consumption of 76 mA at 3.3 V DC.

Status Indication and Diagnostics

The module provides local LED indications for operating status and channel-level diagnostics:

  • RUN (green): Module operating status.
  • Channel LEDs (green): Individual input channel diagnostics.
  • ERR (red): Module error indication.
  • I/O (red): Module I/O fault indication.

Individual channel indicators help maintenance personnel identify input-related problems without relying exclusively on PLC application diagnostics.

Technical Specifications

Parameter Specification
Model BMXDAI1615
Brand Schneider Electric
Product Range Modicon X80
Product Type Discrete Input Module
Number of Inputs 16
Input Type Capacitive, isolated
Input Voltage 200-240 V AC
Input Current 3 mA
Input Frequency 50/60 Hz
Frequency Limits 47-63 Hz
Input Compatibility 2-wire proximity sensors
Input Logic IEC 61131-2 Type 1
Guaranteed State 1 Voltage >= 164 V
Guaranteed State 0 Voltage = 3 mA
Guaranteed State 0 Current 10 MOhm at 500 V DC
Channel-to-Channel Isolation 1780 Vrms for 1 minute
Channel-to-Bus Isolation 1780 Vrms for 1 minute
Typical Current Consumption 76 mA at 3.3 V DC
Maximum Current Consumption 126 mA at 3.3 V DC
Power Dissipation 5 W
MTBF 3,700,000 hours
Protection Rating IP20
Protective Treatment Standard version
Operating Temperature 0 to 60 deg C
Storage Temperature -40 to 85 deg C
Relative Humidity 5-95%, non-condensing
Operating Altitude 0-2000 m; 2000-5000 m with derating
Pollution Degree 2
Vibration Resistance 3 gn
Shock Resistance 30 gn
Dimensions (H x W x D) 134.6 x 32 x 86 mm
Net Weight 0.157 kg
Dielectric Strength 1780 V AC, 50/60 Hz, 1 minute
Standards IEC 61131-2
Certifications and Markings CE, UKCA, cULus, EAC, RCM

Installation and System Configuration

The BMXDAI1615 is designed for installation in a Modicon X80 rack. It is identified as compatible with Modicon M340 and M580 PLC architectures, including local and remote I/O configurations.

The module uses a 40-way removable terminal block with caged or spring-type connections. It must be secured to the rack with two screws. The field wiring arrangement and terminal assignments should be checked against the applicable connection diagram before commissioning.

The maximum channel input voltage is 264 Vrms at 63 Hz. Applying a voltage above this limit can damage the input module.

Frequently Asked Questions

Q: How many AC input signals can the BMXDAI1615 monitor?

A: It supports 16 isolated AC input channels. Each channel monitors a 200-240 V AC field signal, subject to the specified input thresholds and electrical limits.

Q: Can the BMXDAI1615 connect to two-wire proximity sensors?

A: Yes. It supports two-wire AC proximity sensors conforming to IEC 60947-5-2 and IEC 61131-2 Type 1. Sensor voltage and current characteristics must meet the module's input requirements.

Q: Which PLC platforms support the BMXDAI1615?

A: The module is specified for Modicon M340 and M580 PLC architectures, including local and remote I/O configurations. The rack and terminal block arrangement must match the module installation requirements.

Pagamento: T/T, Western Union.

Porto de expedição: Xiamen.

Prazo de entrega: Normalmente, 1–3 dias úteis após a confirmação do pagamento (sujeito à disponibilidade em stock).

Entrega mundial: Enviamos peças de automação industrial para clientes em todo o mundo. Os custos de transporte são indicados no seu pedido de cotação.

Perguntas frequentes

Perguntas frequentes sobre orçamentos, envio, garantia e devoluções

Clique em Solicitar um orçamento na página do produto e envie-nos o número da peça, a quantidade necessária e o país de destino. A nossa equipa de vendas responderá com a disponibilidade atual, o preço e o prazo de entrega estimado.

Os artigos disponíveis em stock são normalmente preparados após o pagamento e a confirmação da encomenda. A maioria das encomendas é expedida do nosso armazém na China, embora o local de expedição possa variar consoante o stock disponível.

Sim. Enviamos peças de automação industrial para clientes em todo o mundo. O custo de envio e o tempo de trânsito dependem do destino, do peso da encomenda, do tamanho do produto e dos requisitos de importação locais.

Utilizamos habitualmente os serviços de correio expresso internacionais DHL, FedEx, UPS e outros. O transportador pode ser selecionado de acordo com o destino, a rapidez de entrega, o tamanho do envio e os requisitos do cliente.

Os nossos produtos estão geralmente cobertos por uma garantia de 12 meses. Os produtos elegíveis também podem ser devolvidos ao abrigo da nossa política de reembolso de 30 dias. Contacte a nossa equipa antes de devolver qualquer artigo para confirmar os termos aplicáveis e as instruções de devolução.

Products FAQs

Também poderá gostar de