
Notificado por e-mail quando este produto estiver disponível
- Descrição
- Reviews
- Envio e pagamento
The BMXDRA0815 is an 8-channel discrete relay output module in the Schneider Electric Modicon X80 range. It provides eight electrically isolated normally open (NO) relay outputs for switching AC or DC loads. The module supports rated load voltages of 24-240 V AC and 24-125 V DC, with positive output logic and a standard protective coating. It is designed for Modicon M340 and M580 automation platforms.
Output Configuration and Operation
The BMXDRA0815 uses electromechanical relay contacts to switch external loads. Each of its eight output channels operates as a normally open contact, closing when the corresponding output command is activated and opening when the command is removed.
The relay contacts support both AC and DC switching. Unlike transistor output modules, relay outputs can switch different voltage types without requiring the external load to use the same voltage as the PLC's internal logic supply. The eight outputs are electrically isolated, allowing separate load circuits within the limits of the module's electrical ratings.
Switching Characteristics and Load Protection
The module has an activation response time of 10 ms or less and a deactivation response time of 13 ms or less. These characteristics should be considered when selecting the module for applications involving frequent switching or time-sensitive output sequences.
The permissible switching load depends on voltage, load type, ambient temperature and electrical operating conditions. Inductive loads require particular attention because switching can generate voltage transients across relay contacts.
- AC inductive loads require an appropriately rated RC circuit or ZNO-type surge limiter across each output channel.
- DC inductive loads require a discharge diode on each output channel.
- External fast-blow fuses are required for short-circuit and overload protection.
The minimum switching load is also relevant when controlling low-current signals. Contact operation should be checked against the manufacturer's specified minimum load rather than assuming that the rated voltage range guarantees reliable switching at every current level.
Modicon X80 Platform Integration
The BMXDRA0815 belongs to the Modicon X80 common I/O architecture, which provides a shared hardware environment for Modicon M340 and M580 PLC systems. It can be used in local or remote I/O configurations, subject to the selected PLC architecture and rack arrangement.
The module is installed in an appropriate X80 module rack and secured using two mounting screws. Its field connections use a compatible 20-pin connection arrangement, with cage-clamp, screw-clamp or removable spring-type terminal block options.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | BMXDRA0815 |
| Brand | Schneider Electric |
| Product Series | Modicon X80 |
| Product Type | Discrete Relay Output Module |
| Number of Outputs | 8 |
| Output Type | Electromechanical Relay |
| Contact Configuration | 8 Normally Open (NO) |
| Output Isolation | Electrically isolated channels |
| Discrete Output Logic | Positive |
| Rated AC Voltage | 24-240 V AC |
| Rated DC Voltage | 24-125 V DC |
| Minimum Switching Load | 5 V DC / 10 mA |
| Output Activation Time | 10 MOhm at 500 V DC |
| Dielectric Strength | 1780 V AC at 50/60 Hz for 1 min |
| MTBF | 3,200,000 h (product specification) |
| Operating Temperature | 0 to 60 deg C |
| Relative Humidity | 5-95% at 60 deg C, non-condensing |
| Protection Rating | IP20 |
| Protective Coating | Standard version |
| Product Weight | 0.169 kg |
| EAN | 3606481275608 |
| Lifecycle Carbon Footprint | 157 kg CO2 eq. |
Frequently Asked Questions
Q: How many relay outputs does the BMXDRA0815 provide?
A: It provides eight electrically isolated normally open relay outputs. Each channel can switch an external AC or DC load within its specified electrical switching limits.
Q: Can the BMXDRA0815 switch both AC and DC loads?
A: Yes. Its rated voltage ranges are 24-240 V AC and 24-125 V DC. However, permissible switching power and current depend on the load type and operating conditions. Inductive loads require appropriate external suppression components.
Q: Is the BMXDRA0815 compatible with Modicon M340 and M580 PLC systems?
A: Yes. It belongs to the Modicon X80 I/O family and is specified for Modicon M340 and M580 local or remote I/O configurations. The selected rack, connection block and system architecture must support the module.
Pagamento: T/T, Western Union.
Porto de expedição: Xiamen.
Prazo de entrega: Normalmente, 1–3 dias úteis após a confirmação do pagamento (sujeito à disponibilidade em stock).
Entrega mundial: Enviamos peças de automação industrial para clientes em todo o mundo. Os custos de transporte são indicados no seu pedido de cotação.
Perguntas frequentes
Perguntas frequentes sobre orçamentos, envio, garantia e devoluçõesClique em Solicitar um orçamento na página do produto e envie-nos o número da peça, a quantidade necessária e o país de destino. A nossa equipa de vendas responderá com a disponibilidade atual, o preço e o prazo de entrega estimado.
Os artigos disponíveis em stock são normalmente preparados após o pagamento e a confirmação da encomenda. A maioria das encomendas é expedida do nosso armazém na China, embora o local de expedição possa variar consoante o stock disponível.
Sim. Enviamos peças de automação industrial para clientes em todo o mundo. O custo de envio e o tempo de trânsito dependem do destino, do peso da encomenda, do tamanho do produto e dos requisitos de importação locais.
Utilizamos habitualmente os serviços de correio expresso internacionais DHL, FedEx, UPS e outros. O transportador pode ser selecionado de acordo com o destino, a rapidez de entrega, o tamanho do envio e os requisitos do cliente.
Os nossos produtos estão geralmente cobertos por uma garantia de 12 meses. Os produtos elegíveis também podem ser devolvidos ao abrigo da nossa política de reembolso de 30 dias. Contacte a nossa equipa antes de devolver qualquer artigo para confirmar os termos aplicáveis e as instruções de devolução.
Também poderá gostar de
Publicações do blogue
Notícias sobre automação industrial, guias técnicos e atualizações de produtos.
