Ir para as informações do produto
1 de 3

Schneider BMXDRA1605 Modicon X80 Discrete Relay Output Module

18 em stock
  • Manufacturer: Schneider
  • Product No.: BMXDRA1605
  • Country of origin: France
  • Product Type: Modicon X80 Discrete Relay Output Module
  • Condition: Completamente novo
  • Payment: T/T, Western Union
  • Weight: 0.15 kg
  • Shipping port: Xiamen
  • Warranty: 12 meses
  • Descrição
  • Reviews
  • Envio e pagamento

The Schneider Electric BMXDRA1605 is a 16-channel discrete relay output module in the Modicon X80 series. It provides normally open (NO) relay contacts for switching external AC or DC loads, with a specified switching capacity of 3 A. The module supports 24-240 V AC and 24-48 V DC applications and is designed for integration into Modicon M340 and M580 automation platforms.

Output Function and Configuration

The BMXDRA1605 uses electromechanical relay contacts to switch external loads according to output commands from the PLC. Its 16 normally open outputs remain open when de-energized and close when the corresponding output relay is activated.

The AC and DC voltage ranges allow the module to control different types of field circuits. The minimum switching current is 1 mA at 5 V DC, which is relevant when evaluating low-current loads. The specified output response times are less than 8 ms for activation and 10 ms for deactivation.

Platform Compatibility and Mounting

The module belongs to the Modicon X80 I/O platform, which provides a common module architecture for Modicon M340 and M580 PLC systems, including local and remote I/O configurations. It is installed in a compatible module rack and secured with two screws.

The connection is made through a 20-pin removable terminal block. The source identifies cage-clamp, screw-clamp and removable spring-terminal block options. The terminal block and associated wiring should be selected according to the cabinet configuration and field wiring requirements.

Electrical Isolation and Environmental Conditions

The module has an insulation resistance greater than 10 MOhm at 500 V DC and a dielectric withstand rating of 2000 V AC at 50/60 Hz for 1 minute. These specifications describe its insulation characteristics and should be considered when checking the separation requirements between control and field circuits.

The BMXDRA1605 has an IP20 protection rating and supports operation from 0 to 60 deg C. Relative humidity is specified as 5-95% at 55 deg C, without condensation. Its reported MTBF is approximately 2.1 million hours.

Technical Specifications

Parameter Specification
Model BMXDRA1605
Brand Schneider Electric
Series Modicon X80
Product Type Discrete Relay Output Module
Number of Outputs 16
Output Type Normally Open (NO) Relay Contacts
Switching Voltage 24-240 V AC / 24-48 V DC
Switching Current 3 A
Minimum Switching Current 1 mA at 5 V DC
Output Response Time - Activation Less than 8 ms
Output Response Time - Deactivation 10 ms
Discrete Output Logic Positive
Insulation Resistance Greater than 10 MOhm at 500 V DC
Dielectric Withstand Voltage 2000 V AC at 50/60 Hz for 1 min
MTBF Approximately 2,100,000 h
Mounting Modicon X80 Module Rack; secured with 2 screws
Connection 20-pin removable terminal block
Protection Rating IP20
Operating Temperature 0 to 60 deg C
Relative Humidity 5-95% at 55 deg C, non-condensing
Coating Standard version
Product Weight 0.15 kg
EAN 3595863909234
Environmental Carbon Footprint 146 kg CO2 eq.

Frequently Asked Questions

Q: How many relay outputs does the BMXDRA1605 provide?

A: It provides 16 normally open relay outputs. Each output switches an external circuit in response to its corresponding PLC output command.

Q: Can the BMXDRA1605 switch both AC and DC loads?

A: Yes. The specified switching voltage ranges are 24-240 V AC and 24-48 V DC, with a rated switching current of 3 A. The actual load must also comply with the applicable contact ratings and switching conditions.

Q: Which PLC platforms support the BMXDRA1605?

A: The module is specified for Modicon M340 and Modicon M580 PLC platforms, including local and remote I/O configurations. A compatible Modicon X80 rack and 20-pin terminal block are required.

Output Protection and Switching Limits

For inductive loads, the external circuit requires suitable suppression to limit switching overvoltage. Schneider's technical documentation specifies discharge diodes for DC outputs and RC circuits or ZNO surge limiters for AC outputs.

The manufacturer's product datasheet specifies a conventional free-air thermal current (Ith) of 2 A. It also provides load-dependent electrical durability ratings under AC-12, AC-15, DC-12 and DC-13 utilization categories. These ratings should be checked against the actual load rather than treating the 3 A figure in the product listing as a universal continuous switching rating.

Pagamento: T/T, Western Union.

Porto de expedição: Xiamen.

Prazo de entrega: Normalmente, 1–3 dias úteis após a confirmação do pagamento (sujeito à disponibilidade em stock).

Entrega mundial: Enviamos peças de automação industrial para clientes em todo o mundo. Os custos de transporte são indicados no seu pedido de cotação.

Perguntas frequentes

Perguntas frequentes sobre orçamentos, envio, garantia e devoluções

Clique em Solicitar um orçamento na página do produto e envie-nos o número da peça, a quantidade necessária e o país de destino. A nossa equipa de vendas responderá com a disponibilidade atual, o preço e o prazo de entrega estimado.

Os artigos disponíveis em stock são normalmente preparados após o pagamento e a confirmação da encomenda. A maioria das encomendas é expedida do nosso armazém na China, embora o local de expedição possa variar consoante o stock disponível.

Sim. Enviamos peças de automação industrial para clientes em todo o mundo. O custo de envio e o tempo de trânsito dependem do destino, do peso da encomenda, do tamanho do produto e dos requisitos de importação locais.

Utilizamos habitualmente os serviços de correio expresso internacionais DHL, FedEx, UPS e outros. O transportador pode ser selecionado de acordo com o destino, a rapidez de entrega, o tamanho do envio e os requisitos do cliente.

Os nossos produtos estão geralmente cobertos por uma garantia de 12 meses. Os produtos elegíveis também podem ser devolvidos ao abrigo da nossa política de reembolso de 30 dias. Contacte a nossa equipa antes de devolver qualquer artigo para confirmar os termos aplicáveis e as instruções de devolução.

Products FAQs

Também poderá gostar de