Ir para as informações do produto
1 de 3

Schneider Electric BMXDDM3202K Modicon X80 Discrete I/O Module

18 em stock
  • Manufacturer: Schneider
  • Product No.: BMXDDM3202K
  • Country of origin: France
  • Product Type: Modicon X80 Discrete I/O Module
  • Condition: Completamente novo
  • Payment: T/T, Western Union
  • Weight: 0.11 kg
  • Shipping port: Xiamen
  • Warranty: 12 meses
  • Descrição
  • Reviews
  • Envio e pagamento

The BMXDDM3202K is a 24 VDC discrete mixed input/output module in the Schneider Electric Modicon X80 platform. It combines 16 positive-logic (sink) discrete inputs and 16 positive-logic (source) solid-state outputs within a single rack slot, using a 40-pin front connector for high-density field wiring in Modicon M340 and M580 automation architectures.

Channel Configuration and Electrical Characteristics

The input section meets IEC/EN 61131-2 Type 3 requirements with a 9600 Ohm input impedance, a typical response time of 4 ms (7 ms maximum), and sensor voltage supervision that flags faults below 14 VDC and confirms normal status above 18 VDC.

The output section provides 16 solid-state channels rated at 0.1 A nominal per channel (0.125 A maximum per channel, 3.2 A maximum per module) with a 1.2 ms output response time and a maximum voltage drop below 1.5 V in State 1. Up to 3 outputs can be connected in parallel to drive higher-current loads, and each output channel integrates reverse polarity and overvoltage protection.

System Compatibility and Mounting

The module operates across Modicon M340 and Modicon M580 PLC systems in both local racks and remote I/O drops. It draws up to 166 mA from the 3.3 VDC backplane bus and up to 104 mA at 24 VDC.

This standard-version unit features IP20 ingress protection and TC (all-climate) treatment for operation from 0 deg C to 60 deg C. Field signals connect via a 40-pin removable terminal block or pre-wired cordsets such as the BMXFCW503 paired with Modicon ABE7 Telefast sub-bases. The module installs directly into a Modicon X80 rack and secures with two captive mounting screws.

Technical Specifications

Parameter Specification
Model BMXDDM3202K
Brand Schneider Electric
Series Modicon X80
Product Type Discrete Mixed I/O Module
Discrete Inputs 16 channels, 24 VDC, positive logic (IEC/EN 61131-2 Type 3)
Input Impedance 9600 Ohm
Input Response Time 4 ms typical, 7 ms maximum
Sensor Voltage Detection Threshold Less than 14 VDC fault; greater than 18 VDC OK
Discrete Outputs 16 channels, 24 VDC, positive logic solid-state
Rated Output Current 0.1 A per channel (0.125 A max per channel, 3.2 A max per module)
Output Response Time 1.2 ms
Output Voltage Drop Less than 1.5 V in State 1
Output Paralleling Yes, maximum 3 outputs
Resistive Load Impedance Less than or equal to 220 Ohm
Maximum Overload Time 15 ms
Switching Frequency 0.5 / LI^2 Hz
Protection Features Reverse polarity protection (input and output), output overvoltage protection, external 0.5 A fast-blow fuse per input group
Current Consumption Less than or equal to 104 mA at 24 VDC; less than or equal to 166 mA at 3.3 VDC
Dielectric Strength 1500 VAC at 50/60 Hz for 1 min (output/ground, output/internal logic, primary/secondary); 500 VDC for 1 min (between input and output groups)
Insulation Resistance Greater than 10 MOhm at 500 VDC
Front Connector 40-pin connector
Ambient Operating Temperature 0 deg C to 60 deg C
Relative Humidity 5% to 95% at 55 deg C, non-condensing
Degree of Protection IP20
Coating Standard version (TC all-climate treatment)
MTBF 429,248 hours (430,000 hours nominal)
Weight 0.11 kg
Certifications and Standards CE, UL, CSA, RCM, EAC, UKCA, Merchant Navy; EN 61131-2 Type 3, EN 61000-6-5, EN 61850-3

Frequently Asked Questions

Q: How does the BMXDDM3202K differ from the BMXDDM3202KH?A: The BMXDDM3202K is the standard-coated version rated for 0 deg C to 60 deg C, whereas the "H" suffix variants in the Modicon X80 family add conformal coating and extended temperature ratings for harsh environments.

Q: Can outputs on the BMXDDM3202K be wired in parallel for higher load current?A: Yes, up to 3 output channels can be connected in parallel on this module to increase current capacity, provided the total module current does not exceed 3.2 A.

Q: What wiring accessories are required to connect field devices to this 40-pin module?A: The module uses a 40-pin front interface and requires a compatible 40-pin removable terminal block or pre-wired cordsets (such as BMXFCW503) connected to Modicon ABE7 Telefast wiring bases.

Pagamento: T/T, Western Union.

Porto de expedição: Xiamen.

Prazo de entrega: Normalmente, 1–3 dias úteis após a confirmação do pagamento (sujeito à disponibilidade em stock).

Entrega mundial: Enviamos peças de automação industrial para clientes em todo o mundo. Os custos de transporte são indicados no seu pedido de cotação.

Perguntas frequentes

Perguntas frequentes sobre orçamentos, envio, garantia e devoluções

Clique em Solicitar um orçamento na página do produto e envie-nos o número da peça, a quantidade necessária e o país de destino. A nossa equipa de vendas responderá com a disponibilidade atual, o preço e o prazo de entrega estimado.

Os artigos disponíveis em stock são normalmente preparados após o pagamento e a confirmação da encomenda. A maioria das encomendas é expedida do nosso armazém na China, embora o local de expedição possa variar consoante o stock disponível.

Sim. Enviamos peças de automação industrial para clientes em todo o mundo. O custo de envio e o tempo de trânsito dependem do destino, do peso da encomenda, do tamanho do produto e dos requisitos de importação locais.

Utilizamos habitualmente os serviços de correio expresso internacionais DHL, FedEx, UPS e outros. O transportador pode ser selecionado de acordo com o destino, a rapidez de entrega, o tamanho do envio e os requisitos do cliente.

Os nossos produtos estão geralmente cobertos por uma garantia de 12 meses. Os produtos elegíveis também podem ser devolvidos ao abrigo da nossa política de reembolso de 30 dias. Contacte a nossa equipa antes de devolver qualquer artigo para confirmar os termos aplicáveis e as instruções de devolução.

Products FAQs

Também poderá gostar de