Přeskočit na informace o produktu
1 z velké části 3

GE IS220PRTDH1A Mark VIe Resistance Temperature Device Input Module

20 skladem
  • Manufacturer: General Electric
  • Product No.: IS220PRTDH1A
  • Product Type: Mark VIe Resistance Temperature Device Input Module
  • Condition: Zcela nový
  • Payment: T/T, Western Union
  • Weight: 0.8 kg
  • Shipping port: Xiamen
  • Warranty: 12 měsíců
  • Popis
  • Reviews
  • Doprava a platba

The GE IS220PRTDH1A is a Resistance Temperature Device (RTD) input module in the Mark VIe control system. It acquires resistance signals from connected RTD sensors and provides temperature measurement data to the control system through dual RJ-45 Ethernet interfaces. Its 8-channel input configuration supports multiple RTD sensor types and selectable scan rates.

Functional Description

The IS220PRTDH1A interfaces field RTD sensors with the Mark VIe control platform. RTD sensors change electrical resistance in response to temperature variations. The module acquires these resistance signals, converts them into digital measurement data, and communicates the results to the controller.

The eight input channels allow multiple temperature measurement points to be connected through the associated RTD terminal board. This provides a centralized interface for temperature signal acquisition without requiring a separate input pack for each sensor.

RTD Input Channels and Sensor Types

The module supports 8 three-wire RTD input channels. Its acquisition circuitry supplies a multiplexed 10 mA DC excitation current to the connected sensors. The measured voltage is used to determine resistance, with the selected RTD characteristic applied by the module processor to obtain temperature values.

Supported sensor types include:

  • 100 Ohm and 200 Ohm platinum RTDs.
  • 10 Ohm copper RTDs.
  • 120 Ohm nickel RTDs.

The module also detects RTD open-circuit and short-circuit conditions through out-of-range measurements. The maximum two-way cable resistance is 15 Ohm, which should be considered when selecting field wiring.

Scan Rate and Signal Processing

The IS220PRTDH1A provides two scanning modes:

  • Normal scan: 4 Hz. Each channel is sampled at a 250 ms interval. This mode provides 50 Hz and 60 Hz power-line noise rejection.
  • Fast scan: 25 Hz. Each channel is sampled at a 40 ms interval. This mode provides faster measurement updates but sacrifices 50 Hz and 60 Hz noise rejection.

The scan mode should be selected according to the required measurement response and electrical noise conditions. The normal mode is appropriate where power-frequency interference rejection is important, while fast mode is intended for applications requiring more frequent measurement updates.

Communication and Terminal Board Interface

The module connects directly to a compatible SRTD or TRTD terminal board. The terminal board provides the field RTD connection interface, while the I/O pack handles signal acquisition and communication with the Mark VIe controller.

Two RJ-45 Ethernet ports provide connections to the Mark VIe I/O network (IONet). The PRTD input pack supports simplex operation; two Ethernet connections should not be interpreted as dual-module control redundancy.

Technical Specifications

Parameter Specification
Model IS220PRTDH1A
Brand GE (General Electric)
Series Mark VIe
Product Type Resistance Temperature Device Input Module
Hardware Revision H1A
Number of Channels 8 RTD Inputs
RTD Wiring 3-wire
Supported RTD Types 100 Ohm and 200 Ohm Platinum, 10 Ohm Copper, 120 Ohm Nickel
A/D Converter Resolution 14-bit
Scan Rate 4 Hz / 25 Hz
RTD Excitation Current 10 mA DC, multiplexed
Maximum Lead Resistance 15 Ohm, two-way cable resistance
Communication Interface Dual RJ-45 Ethernet
Power Supply 28 V DC nominal
Maximum Power Supply Current 0.24 A
Operating Temperature -30 deg C to +65 deg C (-22 deg F to +149 deg F)
Storage Temperature -40 deg C to +85 deg C (-40 deg F to +185 deg F)
Relative Humidity 5% to 95%, non-condensing
Cooling Requirements Free air convection
Mounting Type Direct mounting on SRTD / TRTD terminal board

Frequently Asked Questions

Q: Which terminal boards are compatible with the IS220PRTDH1A?

A: The module supports the TRTDH1D, TRTDH2D and SRTD terminal boards. It is not compatible with the DIN-rail-mounted DRTD terminal board. The exact terminal board revision should be checked before replacement.

Q: What is the difference between the 4 Hz and 25 Hz scan modes?

A: The 4 Hz mode provides 50 Hz and 60 Hz power-line noise rejection, while the 25 Hz mode provides faster measurement updates without the same power-frequency rejection. Select the mode according to the measurement response and noise-rejection requirements.

Q: Does the IS220PRTDH1A support redundant operation?

A: The PRTD input pack supports simplex operation. Its two Ethernet ports provide network connection options but do not establish dual-module redundancy or TMR operation.

Platba: T/T, Western Union.

Přístav odeslání: Xiamen.

Dodací lhůta: Obvykle 1–3 pracovní dny po potvrzení platby (v závislosti na skladových zásobách).

Celosvětové doručení: Dodáváme díly pro průmyslovou automatizaci zákazníkům po celém světě. Cena přepravy bude uvedena v naší nabídce na základě vaší poptávky.

Často kladené otázky

Časté otázky týkající se cenových nabídek, dopravy, záruky a vrácení zboží

Na stránce produktu klikněte na Požádat o cenovou nabídku a zašlete nám číslo dílu, požadované množství a cílovou zemi. Náš prodejní tým vám odpoví s informacemi o aktuální dostupnosti, ceně a odhadované době dodání.

Položky skladem se obvykle připravují po zaplacení a potvrzení objednávky. Většina objednávek se odesílá z našeho skladu v Číně, ačkoli místo odeslání se může lišit v závislosti na aktuálním stavu zásob.

Ano. Zasíláme díly pro průmyslovou automatizaci zákazníkům po celém světě. Náklady na dopravu a doba přepravy závisí na místě určení, hmotnosti zásilky, velikosti produktu a místních dovozních požadavcích.

Obvykle využíváme DHL, FedEx, UPS a další mezinárodní kurýrní služby. Dopravce lze vybrat podle místa určení, rychlosti doručení, velikosti zásilky a požadavků zákazníka.

Na naše výrobky se obecně vztahuje 12měsíční záruka. Způsobilé výrobky lze také vrátit v rámci našich 30denních podmínek pro vrácení peněz. Před vrácením jakékoli položky kontaktujte náš tým a ověřte si platné podmínky a pokyny k vrácení.

Products FAQs

Mohlo by se vám také líbit