
Upozornit e-mailem, jakmile bude tento produkt dostupný
- Popis
- Reviews
- Doprava a platba
The Schneider BMXCPS2010 is an isolated 24 VDC power supply module for the Modicon X80 platform, providing power to the I/O modules and processor through the rack backplane. It delivers 16.8 W at 24 VDC and 8.3 W at 3.3 VDC for the I/O logic supply. The module includes secondary-circuit overload, overvoltage and short-circuit protection, along with a rack voltage status LED and a RESET button for cold restart.
Power Supply Function
The BMXCPS2010 converts an external isolated 24 VDC input into the secondary supply rails required by the Modicon X80 rack. Its outputs serve different functions: the 24 VDC rail supplies the I/O modules and processor, while the 3.3 VDC rail supplies I/O module logic.
The module provides 0.7 A at 24 VDC and 2.5 A at 3.3 VDC. These separate output ratings should be considered when checking the total power requirements of the installed rack configuration.
Protection and Status Indication
The secondary circuits include overload, overvoltage and short-circuit protection for the 24 VDC sensor supply. The primary-circuit internal fuse is not accessible. A green LED indicates that rack voltage is OK, allowing maintenance personnel to check the power supply status locally.
A RESET button provides a cold-start reset function. The module also has a two-pin alarm relay connector for the alarm circuit.
Electrical Connections and Installation
The module uses a five-pin connector for the supply input, protective earth and 24 VDC input sensor connection. It must be installed in a compatible module rack and secured with two screws.
The specified maximum cable distances depend on the copper conductor cross-section:
- 20 m with 1.5 mm2 copper power supply cable.
- 30 m with 2.5 mm2 copper power supply cable.
The specified power interruption immunity is 1 ms. Primary-to-earth and primary-to-secondary insulation resistance are both at least 10 MOhm.
Parameter Specifications
| Parameter | Specification |
|---|---|
| Model | BMXCPS2010 |
| Brand | Schneider Electric |
| Product Type | Modicon X80 Power Supply Module |
| Series | Modicon X80 |
| Primary Voltage | 24 VDC, isolated |
| Primary Voltage Range | 18-31.2 VDC |
| Input Current | 1 A at 24 VDC |
| Inrush Current | 30 A at 24 VDC |
| Secondary Power | 16.8 W at 24 VDC; 8.3 W at 3.3 VDC |
| Secondary Current | 0.7 A at 24 VDC; 2.5 A at 3.3 VDC |
| Maximum Power Dissipation | 8.5 W |
| Power Interruption Immunity | 1 ms |
| Protection | Secondary overload, overvoltage and short-circuit protection |
| Status Indicator | 1 green LED, rack voltage OK |
| Reset Function | Cold-start RESET button |
| Electrical Connections | 2-pin alarm relay connector; 5-pin power supply connector |
| Maximum Cable Distance | 20 m with 1.5 mm2 copper cable; 30 m with 2.5 mm2 copper cable |
| Insulation Resistance | At least 10 MOhm, primary/earth and primary/secondary |
| Dielectric Strength | 1500 V, primary/earth and primary/secondary |
| Protection Rating | IP20 |
| Operating Temperature | 0 to 60 deg C |
| Storage Temperature | -40 to 85 deg C |
| Relative Humidity | 5-95% at 55 deg C, non-condensing |
| Coating | TC |
| Operating Altitude | 0-2000 m; derating required from 2000 to 5000 m |
| Vibration Resistance | 3 Gn |
| Shock Resistance | 30 gn |
| MTBF | 4,886,000 h |
| Weight | 0.29 kg |
| EAN | 3595863909005 |
| Total Lifecycle Carbon Footprint | 456 kg CO2 eq. |
Backplane Compatibility
The BMXCPS2010 is designed for Modicon X80 module racks used in Modicon M340 and Modicon M580 automation architectures. However, it is explicitly listed as not compatible with BMEXBP..02 backplanes. Rack selection should therefore be checked against the exact backplane reference before installation.
The module is specified for IP20 protection and compliance with EN 61131-2, EN 61000-6-4, EN 61000-6-2 and EN 61010-2-201. Listed approvals include CE, RCM, Merchant Navy, CSA, EAC and UL.
Frequently Asked Questions
Q: Can the BMXCPS2010 operate with a 24 VDC input below 24 V?
A: Yes. Its specified primary voltage range is 18-31.2 VDC. The input supply should remain within this range under normal operating and load conditions.
Q: Is the BMXCPS2010 compatible with all Modicon X80 backplanes?
A: No. Although it is specified for Modicon X80 racks, it is explicitly excluded from BMEXBP..02 backplanes. Check the exact rack reference before selecting this power supply.
Q: What is the difference between the 24 VDC and 3.3 VDC outputs?
A: The 24 VDC output supplies the I/O modules and processor, while the 3.3 VDC output supplies I/O module logic. Both output power ratings must be considered when checking the rack power budget.
Platba: T/T, Western Union.
Přístav odeslání: Xiamen.
Dodací lhůta: Obvykle 1–3 pracovní dny po potvrzení platby (v závislosti na skladových zásobách).
Celosvětové doručení: Dodáváme díly pro průmyslovou automatizaci zákazníkům po celém světě. Cena přepravy bude uvedena v naší nabídce na základě vaší poptávky.
Často kladené otázky
Časté otázky týkající se cenových nabídek, dopravy, záruky a vrácení zbožíNa stránce produktu klikněte na Požádat o cenovou nabídku a zašlete nám číslo dílu, požadované množství a cílovou zemi. Náš prodejní tým vám odpoví s informacemi o aktuální dostupnosti, ceně a odhadované době dodání.
Položky skladem se obvykle připravují po zaplacení a potvrzení objednávky. Většina objednávek se odesílá z našeho skladu v Číně, ačkoli místo odeslání se může lišit v závislosti na aktuálním stavu zásob.
Ano. Zasíláme díly pro průmyslovou automatizaci zákazníkům po celém světě. Náklady na dopravu a doba přepravy závisí na místě určení, hmotnosti zásilky, velikosti produktu a místních dovozních požadavcích.
Obvykle využíváme DHL, FedEx, UPS a další mezinárodní kurýrní služby. Dopravce lze vybrat podle místa určení, rychlosti doručení, velikosti zásilky a požadavků zákazníka.
Na naše výrobky se obecně vztahuje 12měsíční záruka. Způsobilé výrobky lze také vrátit v rámci našich 30denních podmínek pro vrácení peněz. Před vrácením jakékoli položky kontaktujte náš tým a ověřte si platné podmínky a pokyny k vrácení.
Mohlo by se vám také líbit
Příspěvky na blogu
Novinky z oblasti průmyslové automatizace, technické příručky a aktualizace produktů.
