Přeskočit na informace o produktu
1 z velké části 3

Schneider Electric BMXDRA0805H Modicon X80 Discrete Output Module

18 skladem
  • Manufacturer: Schneider
  • Product No.: BMXDRA0805H
  • Country of origin: France
  • Product Type: Modicon X80 Discrete Output Module
  • Condition: Zcela nový
  • Payment: T/T, Western Union
  • Weight: 0.145 kg
  • Shipping port: Xiamen
  • Warranty: 12 měsíců
  • Popis
  • Reviews
  • Doprava a platba

The Schneider Electric BMXDRA0805H is an 8-channel normally open (NO) relay discrete output module designed for the Modicon X80 common I/O platform, supporting Modicon M580 and Modicon M340 Programmable Automation Controllers (PAC). Engineered with conformal coating and an extended operating temperature range of -25 deg C to +70 deg C, this ruggedized module switches 24 to 240 V AC and 24 V DC loads in severe industrial environments.

Output Switching and Electrical Performance

The BMXDRA0805H provides 8 normally open relay output channels configured with positive discrete output logic. It accommodates a nominal load voltage range of 24 to 240 V AC (19 to 264 V AC operating limits) and 12 to 24 V DC (10 to 34 V DC operating limits), requiring a minimum switching load of 10 mA at 5 V DC to ensure reliable contact closure.

Backplane power draw is 79 mA typical at 3.3 V DC. Output switching response times are less than 10 ms for activation and less than 8 ms for deactivation, making the module suitable for general relay control of solenoids, contactors, and pilot indicators. Channel-to-bus isolation is rated at 2000 V AC (50/60 Hz for 1 minute) with an insulation resistance exceeding 10 MOhm at 500 V DC.

Ruggedized Construction and Environmental Ratings

The "H" suffix designates the hardened version featuring conformal coating on the internal printed circuit boards. This protective treatment enables continuous operation from -25 deg C to +70 deg C and up to 95% non-condensing relative humidity at 55 deg C.

The IP20-rated housing is qualified against corrosive and particulate contaminants under standard industrial classifications:

  • Gas resistance: Class Gx and Class 3C4
  • Dust and sand resistance: Class 3S4
  • Salt mist resistance: Level 2
  • Mold growth and fungal spore resistance: Class 3B2

Lifecycle Status and Replacement

Schneider Electric discontinued the BMXDRA0805H on July 1, 2022, with end-of-service scheduled for June 30, 2030. The official direct replacement is the Schneider Electric BMXDRA0815H, which retains the 8 NO relay output form factor and conformal coating while expanding the nominal DC switching capability to 24 to 125 V DC.

Technical Specifications

Parameter Specification
Model BMXDRA0805H
Brand Schneider Electric
Product Series Modicon X80
Product Type Discrete Output Module
Compatible Controllers Modicon M580, Modicon M340
Number of Outputs 8 NO Relay Outputs
Output Logic Positive
Nominal Output Voltage 24 to 240 V AC / 12 to 24 V DC
Operating Voltage Range 19 to 264 V AC / 10 to 34 V DC
Minimum Switching Current 10 mA at 5 V DC
Backplane Current Consumption 79 mA typical at 3.3 V DC
Output Response Time < 10 ms (activation), < 8 ms (deactivation)
Dielectric Strength 2000 V AC at 50/60 Hz for 1 min
Insulation Resistance > 10 MOhm at 500 V DC
MTBF 2,119,902 hours
Protective Treatment Conformal coating
Operating Temperature -25 deg C to +70 deg C
Relative Humidity 5% to 95% at 55 deg C (without condensation)
Enclosure Protection IP20
Certifications ATEX, CE, CSA, EAC, IECEx, Merchant Navy, RCM, UL
Standards Compliance EN 61131-2, EN 61000-6-4, EN 61000-6-2, EN 61010-2-201
Net Weight 0.145 kg

Frequently Asked Questions

Q: What is the difference between the BMXDRA0805H and the standard BMXDRA0805?A: The "H" suffix indicates a hardened version with conformal coating, extending the operating temperature range to -25 deg C to +70 deg C and adding resistance to corrosive gases (Gx, 3C4), dust/sand (3S4), salt (Level 2), and mold/fungi (3B2).

Q: Can the BMXDRA0805H be replaced directly by the BMXDRA0815H?A: Yes. Schneider Electric designates the BMXDRA0815H as the official replacement for the discontinued BMXDRA0805H, offering the same 8 NO relay outputs and severe-environment coating while supporting an expanded 24 to 125 V DC load range.

Q: What is the minimum load required for reliable relay switching on the BMXDRA0805H?A: Each relay output requires a minimum switching current of 10 mA at 5 V DC to maintain proper contact reliability.

Platba: T/T, Western Union.

Přístav odeslání: Xiamen.

Dodací lhůta: Obvykle 1–3 pracovní dny po potvrzení platby (v závislosti na skladových zásobách).

Celosvětové doručení: Dodáváme díly pro průmyslovou automatizaci zákazníkům po celém světě. Cena přepravy bude uvedena v naší nabídce na základě vaší poptávky.

Často kladené otázky

Časté otázky týkající se cenových nabídek, dopravy, záruky a vrácení zboží

Na stránce produktu klikněte na Požádat o cenovou nabídku a zašlete nám číslo dílu, požadované množství a cílovou zemi. Náš prodejní tým vám odpoví s informacemi o aktuální dostupnosti, ceně a odhadované době dodání.

Položky skladem se obvykle připravují po zaplacení a potvrzení objednávky. Většina objednávek se odesílá z našeho skladu v Číně, ačkoli místo odeslání se může lišit v závislosti na aktuálním stavu zásob.

Ano. Zasíláme díly pro průmyslovou automatizaci zákazníkům po celém světě. Náklady na dopravu a doba přepravy závisí na místě určení, hmotnosti zásilky, velikosti produktu a místních dovozních požadavcích.

Obvykle využíváme DHL, FedEx, UPS a další mezinárodní kurýrní služby. Dopravce lze vybrat podle místa určení, rychlosti doručení, velikosti zásilky a požadavků zákazníka.

Na naše výrobky se obecně vztahuje 12měsíční záruka. Způsobilé výrobky lze také vrátit v rámci našich 30denních podmínek pro vrácení peněz. Před vrácením jakékoli položky kontaktujte náš tým a ověřte si platné podmínky a pokyny k vrácení.

Products FAQs

Mohlo by se vám také líbit