
Получить уведомление по электронной почте, когда этот товар появится в наличии
- Описание
- Reviews
- Доставка и оплата
The Schneider Electric BMXDAI1615 is a 16-channel isolated AC discrete input module in the Modicon X80 range. It accepts 200-240 V AC field signals and transfers their status to the PLC through the X80 backplane. Capacitive input circuits, individual channel diagnostics and 10 ms activation response make it suitable for monitoring AC switching signals and compatible two-wire proximity sensors.
Input Configuration and Signal Characteristics
The BMXDAI1615 provides 16 electrically isolated input channels for AC signal acquisition. Its capacitive input design supports two-wire proximity sensors conforming to IEC 60947-5-2 and IEC 61131-2 Type 1.
The input thresholds distinguish valid ON and OFF states:
- State 1: at least 164 V AC and 3 mA.
- State 0: no more than 40 V AC and 2 mA.
- Input impedance: 28 kOhm.
- Input frequency: 47-63 Hz.
- Sensor supply range: 170-264 V.
- Maximum channel input voltage: 264 Vrms at 63 Hz.
The sensor voltage monitoring function identifies a sensor supply condition below 80 V AC as a fault and above 170 V AC as OK. These thresholds provide additional information for diagnosing field supply conditions.
Response Time and Electrical Isolation
The AC input response time is 10 ms for activation and 20 ms for deactivation. These values define the delay between a field signal transition and its recognition by the input module.
Channel-to-channel and channel-to-bus isolation are rated at 1780 Vrms for one minute. Insulation resistance is greater than 10 MOhm at 500 V DC. The module has a power dissipation of 5 W and a typical current consumption of 76 mA at 3.3 V DC.
Status Indication and Diagnostics
The module provides local LED indications for operating status and channel-level diagnostics:
- RUN (green): Module operating status.
- Channel LEDs (green): Individual input channel diagnostics.
- ERR (red): Module error indication.
- I/O (red): Module I/O fault indication.
Individual channel indicators help maintenance personnel identify input-related problems without relying exclusively on PLC application diagnostics.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | BMXDAI1615 |
| Brand | Schneider Electric |
| Product Range | Modicon X80 |
| Product Type | Discrete Input Module |
| Number of Inputs | 16 |
| Input Type | Capacitive, isolated |
| Input Voltage | 200-240 V AC |
| Input Current | 3 mA |
| Input Frequency | 50/60 Hz |
| Frequency Limits | 47-63 Hz |
| Input Compatibility | 2-wire proximity sensors |
| Input Logic | IEC 61131-2 Type 1 |
| Guaranteed State 1 Voltage | >= 164 V |
| Guaranteed State 0 Voltage | = 3 mA |
| Guaranteed State 0 Current | 10 MOhm at 500 V DC |
| Channel-to-Channel Isolation | 1780 Vrms for 1 minute |
| Channel-to-Bus Isolation | 1780 Vrms for 1 minute |
| Typical Current Consumption | 76 mA at 3.3 V DC |
| Maximum Current Consumption | 126 mA at 3.3 V DC |
| Power Dissipation | 5 W |
| MTBF | 3,700,000 hours |
| Protection Rating | IP20 |
| Protective Treatment | Standard version |
| Operating Temperature | 0 to 60 deg C |
| Storage Temperature | -40 to 85 deg C |
| Relative Humidity | 5-95%, non-condensing |
| Operating Altitude | 0-2000 m; 2000-5000 m with derating |
| Pollution Degree | 2 |
| Vibration Resistance | 3 gn |
| Shock Resistance | 30 gn |
| Dimensions (H x W x D) | 134.6 x 32 x 86 mm |
| Net Weight | 0.157 kg |
| Dielectric Strength | 1780 V AC, 50/60 Hz, 1 minute |
| Standards | IEC 61131-2 |
| Certifications and Markings | CE, UKCA, cULus, EAC, RCM |
Installation and System Configuration
The BMXDAI1615 is designed for installation in a Modicon X80 rack. It is identified as compatible with Modicon M340 and M580 PLC architectures, including local and remote I/O configurations.
The module uses a 40-way removable terminal block with caged or spring-type connections. It must be secured to the rack with two screws. The field wiring arrangement and terminal assignments should be checked against the applicable connection diagram before commissioning.
The maximum channel input voltage is 264 Vrms at 63 Hz. Applying a voltage above this limit can damage the input module.
Frequently Asked Questions
Q: How many AC input signals can the BMXDAI1615 monitor?
A: It supports 16 isolated AC input channels. Each channel monitors a 200-240 V AC field signal, subject to the specified input thresholds and electrical limits.
Q: Can the BMXDAI1615 connect to two-wire proximity sensors?
A: Yes. It supports two-wire AC proximity sensors conforming to IEC 60947-5-2 and IEC 61131-2 Type 1. Sensor voltage and current characteristics must meet the module's input requirements.
Q: Which PLC platforms support the BMXDAI1615?
A: The module is specified for Modicon M340 and M580 PLC architectures, including local and remote I/O configurations. The rack and terminal block arrangement must match the module installation requirements.
Оплата: T/T, Western Union.
Порт отгрузки: Сямынь.
Срок поставки: Обычно 1–3 рабочих дня после подтверждения оплаты (при наличии товара на складе).
Доставка по всему миру: Мы поставляем детали для промышленной автоматизации клиентам по всему миру. Стоимость перевозки указывается в вашем запросе на коммерческое предложение.
Часто задаваемые вопросы
Часто задаваемые вопросы о ценах, доставке, гарантии и возврате товаровНажмите Запросить предложение на странице товара и отправьте нам номер детали, необходимое количество и страну назначения. Наша команда продаж ответит, сообщив о текущем наличии, цене и предполагаемом сроке доставки.
Товары, имеющиеся в наличии, обычно подготавливаются после оплаты и подтверждения заказа. Большинство заказов отправляется с нашего склада в Китае, однако место отправки может варьироваться в зависимости от текущих запасов.
Да. Мы отправляем детали для промышленной автоматизации клиентам по всему миру. Стоимость и сроки доставки зависят от места назначения, веса посылки, размера товара и местных требований к импорту.
Мы обычно пользуемся услугами DHL, FedEx, UPS и других международных курьерских служб. Перевозчика можно выбрать с учётом пункта назначения, скорости доставки, размера отправления и требований клиента.
На наши товары обычно распространяется 12-месячная гарантия. Товары, соответствующие условиям, также можно вернуть в рамках нашей 30-дневной политики возврата средств. Перед возвратом любого товара свяжитесь с нашей командой, чтобы уточнить применимые условия и инструкции по возврату.
Вам также может понравиться
Публикации в блоге
Новости промышленной автоматизации, технические руководства и обновления продукции.
