Перейти к информации о товаре
1 из 3

Schneider BMXDDM16025 Modicon X80 Mixed Digital I/O Relay Module

18 в наличии
  • Manufacturer: Schneider
  • Product No.: BMXDDM16025
  • Country of origin: France
  • Product Type: Modicon X80 Mixed Digital I/O Relay Module
  • Condition: Совершенно новый
  • Payment: T/T, Western Union
  • Weight: 0.135 kg
  • Shipping port: Сямэнь
  • Warranty: 12 месяцев
  • Описание
  • Reviews
  • Доставка и оплата

The BMXDDM16025 is a mixed digital input/output module in Schneider Electric's Modicon X80 platform. It combines 24 VDC discrete input channels with relay output channels for interfacing field signals and switching external loads. The module provides 8 relay outputs rated for switching AC or DC circuits, with a 20-pin removable terminal block connection option and IP20 protection.

Functional Overview

The BMXDDM16025 handles discrete signal acquisition and relay-based output switching within a Modicon automation system. Its input circuits monitor 24 VDC field signals, while the relay outputs provide electrically switched contacts for controlling external devices.

The relay output arrangement allows the controller to switch loads supplied from separate external circuits rather than limiting output operation to the module's 24 VDC input supply. Output supply voltage and load conditions must be checked against the applicable relay ratings.

Digital Inputs and Relay Outputs

The input section uses 24 VDC discrete signal circuits with an input impedance of 6,800 Ohm. The input voltage detection thresholds distinguish sensor states: below 14 VDC is identified as a sensor fault, while above 18 VDC is identified as sensor OK.

The output section uses electromechanical relays. Its response time is specified as no more than 10 ms for activation and 8 ms for deactivation. The maximum switching voltage is specified as 264 VAC or 125 VDC. These switching limits should be considered separately from the field supply voltage and the permitted load current.

Signal Protection and Electrical Isolation

The module specifies an input protection arrangement with one external 0.5 A fast-acting fuse per input channel group. Separate external fast-acting fuse protection is specified for output channels or channel groups.

Electrical isolation specifications include more than 10 MOhm insulation resistance at 500 VDC. Dielectric strength is specified at 1,500 VAC for 1 minute between primary and secondary circuits, 2,830 VAC for 1 minute across relay outputs, and 500 VDC for 1 minute between I/O groups.

Modicon X80 Platform Integration

The BMXDDM16025 belongs to the Modicon X80 I/O platform, which provides a common hardware environment for Modicon M340 and M580 automation architectures. The module is specified for local or remote I/O configurations, subject to the applicable PLC, rack and hardware configuration.

The module is installed on a compatible module carrier and secured with two screws. A 20-pin cage-clamp, screw-clamp or removable spring-clamp terminal block is specified as the connection option. Verify the terminal block reference and rack configuration before installation.

Technical Specifications

Parameter Specification
Model BMXDDM16025
Brand Schneider Electric
Product Series Modicon X80
Product Type Mixed Digital I/O Relay Module
Digital Input Voltage 24 VDC
Digital Input Impedance 6,800 Ohm
Digital Input Channels 8 channels (product page listing; see editorial note)
Digital Output Channels 8
Digital Output Type Relay
Output Switching Voltage 24-240 VAC (product designation)
Maximum Switching Voltage 264 VAC / 125 VDC
Minimum Switching Current 1 mA at 5 VDC
Output Response Time 18 VDC: sensor OK
Insulation Resistance > 10 MOhm at 500 VDC
Input Protection One external 0.5 A fast-acting fuse per input channel group
Output Protection External fast-acting fuse per output channel or channel group
Dielectric Strength 1,500 VAC, 50/60 Hz, 1 min, primary/secondary
Relay Output Dielectric Strength 2,830 VAC, 50/60 Hz, 1 min
I/O Group Isolation 500 VDC, 1 min
Mounting Modicon X80 module carrier, secured with 2 screws
Connection 20-pin removable terminal block
Protection Rating IP20
Operating Temperature 0 to 60 deg C
Relative Humidity 5-95% at 55 deg C, non-condensing
Climatic Treatment TC
MTBF Approximately 940,000 hours
Protective Coating Standard version
Weight 0.135 kg
EAN 3595863910612
Lifecycle Carbon Footprint 27 kg CO2 eq.

Frequently Asked Questions

Q: What is the difference between the BMXDDM16025 and a transistor output module?

A: The BMXDDM16025 uses relay contacts for its discrete outputs, whereas transistor output modules use semiconductor switching. Relay outputs support specified AC and DC switching circuits, but their mechanical switching frequency and response characteristics differ from solid-state outputs.

Q: Can the relay outputs switch AC and DC loads?

A: Yes. The specified maximum switching voltages are 264 VAC and 125 VDC. The actual permissible load current depends on the applicable relay load ratings and operating conditions; the maximum voltage alone does not establish a 3 A rating for every load type.

Q: What should be checked before replacing an existing BMXDDM16025?

A: Verify the input channel count, relay output configuration, terminal block arrangement, external supply requirements and rack compatibility. Also check the controller's local or remote I/O configuration to ensure that the replacement matches the existing installation.

Оплата: T/T, Western Union.

Порт отгрузки: Сямынь.

Срок поставки: Обычно 1–3 рабочих дня после подтверждения оплаты (при наличии товара на складе).

Доставка по всему миру: Мы поставляем детали для промышленной автоматизации клиентам по всему миру. Стоимость перевозки указывается в вашем запросе на коммерческое предложение.

Часто задаваемые вопросы

Часто задаваемые вопросы о ценах, доставке, гарантии и возврате товаров

Нажмите Запросить предложение на странице товара и отправьте нам номер детали, необходимое количество и страну назначения. Наша команда продаж ответит, сообщив о текущем наличии, цене и предполагаемом сроке доставки.

Товары, имеющиеся в наличии, обычно подготавливаются после оплаты и подтверждения заказа. Большинство заказов отправляется с нашего склада в Китае, однако место отправки может варьироваться в зависимости от текущих запасов.

Да. Мы отправляем детали для промышленной автоматизации клиентам по всему миру. Стоимость и сроки доставки зависят от места назначения, веса посылки, размера товара и местных требований к импорту.

Мы обычно пользуемся услугами DHL, FedEx, UPS и других международных курьерских служб. Перевозчика можно выбрать с учётом пункта назначения, скорости доставки, размера отправления и требований клиента.

На наши товары обычно распространяется 12-месячная гарантия. Товары, соответствующие условиям, также можно вернуть в рамках нашей 30-дневной политики возврата средств. Перед возвратом любого товара свяжитесь с нашей командой, чтобы уточнить применимые условия и инструкции по возврату.

Products FAQs

Вам также может понравиться