
Получить уведомление по электронной почте, когда этот товар появится в наличии
- Описание
- Reviews
- Доставка и оплата
The BMXDDM3202K is a 24 VDC discrete mixed input/output module in the Schneider Electric Modicon X80 platform. It combines 16 positive-logic (sink) discrete inputs and 16 positive-logic (source) solid-state outputs within a single rack slot, using a 40-pin front connector for high-density field wiring in Modicon M340 and M580 automation architectures.
Channel Configuration and Electrical Characteristics
The input section meets IEC/EN 61131-2 Type 3 requirements with a 9600 Ohm input impedance, a typical response time of 4 ms (7 ms maximum), and sensor voltage supervision that flags faults below 14 VDC and confirms normal status above 18 VDC.
The output section provides 16 solid-state channels rated at 0.1 A nominal per channel (0.125 A maximum per channel, 3.2 A maximum per module) with a 1.2 ms output response time and a maximum voltage drop below 1.5 V in State 1. Up to 3 outputs can be connected in parallel to drive higher-current loads, and each output channel integrates reverse polarity and overvoltage protection.
System Compatibility and Mounting
The module operates across Modicon M340 and Modicon M580 PLC systems in both local racks and remote I/O drops. It draws up to 166 mA from the 3.3 VDC backplane bus and up to 104 mA at 24 VDC.
This standard-version unit features IP20 ingress protection and TC (all-climate) treatment for operation from 0 deg C to 60 deg C. Field signals connect via a 40-pin removable terminal block or pre-wired cordsets such as the BMXFCW503 paired with Modicon ABE7 Telefast sub-bases. The module installs directly into a Modicon X80 rack and secures with two captive mounting screws.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | BMXDDM3202K |
| Brand | Schneider Electric |
| Series | Modicon X80 |
| Product Type | Discrete Mixed I/O Module |
| Discrete Inputs | 16 channels, 24 VDC, positive logic (IEC/EN 61131-2 Type 3) |
| Input Impedance | 9600 Ohm |
| Input Response Time | 4 ms typical, 7 ms maximum |
| Sensor Voltage Detection Threshold | Less than 14 VDC fault; greater than 18 VDC OK |
| Discrete Outputs | 16 channels, 24 VDC, positive logic solid-state |
| Rated Output Current | 0.1 A per channel (0.125 A max per channel, 3.2 A max per module) |
| Output Response Time | 1.2 ms |
| Output Voltage Drop | Less than 1.5 V in State 1 |
| Output Paralleling | Yes, maximum 3 outputs |
| Resistive Load Impedance | Less than or equal to 220 Ohm |
| Maximum Overload Time | 15 ms |
| Switching Frequency | 0.5 / LI^2 Hz |
| Protection Features | Reverse polarity protection (input and output), output overvoltage protection, external 0.5 A fast-blow fuse per input group |
| Current Consumption | Less than or equal to 104 mA at 24 VDC; less than or equal to 166 mA at 3.3 VDC |
| Dielectric Strength | 1500 VAC at 50/60 Hz for 1 min (output/ground, output/internal logic, primary/secondary); 500 VDC for 1 min (between input and output groups) |
| Insulation Resistance | Greater than 10 MOhm at 500 VDC |
| Front Connector | 40-pin connector |
| Ambient Operating Temperature | 0 deg C to 60 deg C |
| Relative Humidity | 5% to 95% at 55 deg C, non-condensing |
| Degree of Protection | IP20 |
| Coating | Standard version (TC all-climate treatment) |
| MTBF | 429,248 hours (430,000 hours nominal) |
| Weight | 0.11 kg |
| Certifications and Standards | CE, UL, CSA, RCM, EAC, UKCA, Merchant Navy; EN 61131-2 Type 3, EN 61000-6-5, EN 61850-3 |
Frequently Asked Questions
Q: How does the BMXDDM3202K differ from the BMXDDM3202KH?A: The BMXDDM3202K is the standard-coated version rated for 0 deg C to 60 deg C, whereas the "H" suffix variants in the Modicon X80 family add conformal coating and extended temperature ratings for harsh environments.
Q: Can outputs on the BMXDDM3202K be wired in parallel for higher load current?A: Yes, up to 3 output channels can be connected in parallel on this module to increase current capacity, provided the total module current does not exceed 3.2 A.
Q: What wiring accessories are required to connect field devices to this 40-pin module?A: The module uses a 40-pin front interface and requires a compatible 40-pin removable terminal block or pre-wired cordsets (such as BMXFCW503) connected to Modicon ABE7 Telefast wiring bases.
Оплата: T/T, Western Union.
Порт отгрузки: Сямынь.
Срок поставки: Обычно 1–3 рабочих дня после подтверждения оплаты (при наличии товара на складе).
Доставка по всему миру: Мы поставляем детали для промышленной автоматизации клиентам по всему миру. Стоимость перевозки указывается в вашем запросе на коммерческое предложение.
Часто задаваемые вопросы
Часто задаваемые вопросы о ценах, доставке, гарантии и возврате товаровНажмите Запросить предложение на странице товара и отправьте нам номер детали, необходимое количество и страну назначения. Наша команда продаж ответит, сообщив о текущем наличии, цене и предполагаемом сроке доставки.
Товары, имеющиеся в наличии, обычно подготавливаются после оплаты и подтверждения заказа. Большинство заказов отправляется с нашего склада в Китае, однако место отправки может варьироваться в зависимости от текущих запасов.
Да. Мы отправляем детали для промышленной автоматизации клиентам по всему миру. Стоимость и сроки доставки зависят от места назначения, веса посылки, размера товара и местных требований к импорту.
Мы обычно пользуемся услугами DHL, FedEx, UPS и других международных курьерских служб. Перевозчика можно выбрать с учётом пункта назначения, скорости доставки, размера отправления и требований клиента.
На наши товары обычно распространяется 12-месячная гарантия. Товары, соответствующие условиям, также можно вернуть в рамках нашей 30-дневной политики возврата средств. Перед возвратом любого товара свяжитесь с нашей командой, чтобы уточнить применимые условия и инструкции по возврату.
Вам также может понравиться
Публикации в блоге
Новости промышленной автоматизации, технические руководства и обновления продукции.
