
Получить уведомление по электронной почте, когда этот товар появится в наличии
- Описание
- Reviews
- Доставка и оплата
The Schneider Electric BMXFTA300, also cataloged as the BMXFTA300 prefabricated cable assembly, provides the electrical connection between Modicon M340 I/O modules and Advantys Telefast ABE 7 terminal blocks. It uses a 28-pin removable terminal block connector on the module side and a 25-pin SUB-D connector on the terminal block side, with a cable length of 3 m.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | BMXFTA300 |
| Brand | Schneider Electric |
| Product Series | Modicon X80 |
| Product Type | Prefabricated Cable Assembly |
| Accessory Type | Preformed Cable Set |
| Weight | 0.5 kg |
| Cable Length | 3 m |
| Module-Side Connection | 1 removable 28-pin terminal block |
| Terminal Block-Side Connection | 1 SUB-D 25-pin connector |
| Connector Configuration | 28-pin terminal block to 25-pin SUB-D |
| Compatible I/O Modules | BMXAMI0800, BMXAMI0810 |
| Compatible Terminal Blocks | ABE7CPA02, ABE7CPA03, ABE7CPA31, ABE7CPA31/E |
| Packaging Quantity | 1 unit |
| EAN | 3595864080451 |
I/O Connection Architecture and Compatibility
The BMXFTA300 provides a preassembled electrical interface between Modicon M340 analog I/O modules and Advantys Telefast ABE 7 connection systems.
Its connection arrangement consists of:
- Module side: A removable 28-pin terminal block connects to the I/O module.
- Terminal block side: A 25-pin SUB-D connector connects to the ABE 7 terminal block.
- Cable assembly: A fixed 3 m cable carries the corresponding electrical connections between both interfaces.
The cable is specified for the BMXAMI0800 and BMXAMI0810 analog input modules. Compatibility also includes the ABE7CPA02, ABE7CPA03, ABE7CPA31, and ABE7CPA31/E terminal block references.
For system integration, connector pin assignments and channel wiring must correspond to the selected I/O module and terminal block configuration.
Frequently Asked Questions
Q: Can the BMXFTA300 be used with both BMXAMI0800 and BMXAMI0810?
A: Yes. Both analog input modules are explicitly listed as compatible products. The cable provides the 28-pin terminal block interface required on the module side.
Q: Does the BMXFTA300 support hot-swapping?
A: Hot-swapping capability is not specified for this cable assembly. Disconnect the associated electrical circuits and follow the module manufacturer's maintenance procedure before removing or installing connectors.
Q: What should be checked when replacing an existing BMXFTA300?
A: Verify the 28-pin removable terminal block, 25-pin SUB-D connector, 3 m cable length, and compatibility with the installed ABE 7 terminal block. Check connector condition and wiring continuity before returning the I/O circuit to service.
Field Installation Guidelines
1. Connector Verification: Confirm that the 28-pin removable terminal block matches the designated Modicon I/O module interface and that the 25-pin SUB-D connector matches the ABE 7 terminal block.
2. Cable Routing: Route the 3 m cable away from high-voltage power conductors, motor cables, and sources of electromagnetic interference where practical.
3. Mechanical Installation: Avoid excessive bending, tensile loading, twisting, or compression of the cable. Secure the assembly to prevent connector strain.
4. Electrical Inspection: Inspect connector contacts for oxidation, contamination, or mechanical damage before installation.
5. Shielding and Grounding: Follow the module and terminal block installation documentation for cable shielding and grounding arrangements. Do not assume an undocumented shield termination configuration.
6. Commissioning: Verify connector engagement, wiring continuity, channel correspondence, and analog input signal readings before placing the associated control loop into operation.
Оплата: T/T, Western Union.
Порт отгрузки: Сямынь.
Срок поставки: Обычно 1–3 рабочих дня после подтверждения оплаты (при наличии товара на складе).
Доставка по всему миру: Мы поставляем детали для промышленной автоматизации клиентам по всему миру. Стоимость перевозки указывается в вашем запросе на коммерческое предложение.
Часто задаваемые вопросы
Часто задаваемые вопросы о ценах, доставке, гарантии и возврате товаровНажмите Запросить предложение на странице товара и отправьте нам номер детали, необходимое количество и страну назначения. Наша команда продаж ответит, сообщив о текущем наличии, цене и предполагаемом сроке доставки.
Товары, имеющиеся в наличии, обычно подготавливаются после оплаты и подтверждения заказа. Большинство заказов отправляется с нашего склада в Китае, однако место отправки может варьироваться в зависимости от текущих запасов.
Да. Мы отправляем детали для промышленной автоматизации клиентам по всему миру. Стоимость и сроки доставки зависят от места назначения, веса посылки, размера товара и местных требований к импорту.
Мы обычно пользуемся услугами DHL, FedEx, UPS и других международных курьерских служб. Перевозчика можно выбрать с учётом пункта назначения, скорости доставки, размера отправления и требований клиента.
На наши товары обычно распространяется 12-месячная гарантия. Товары, соответствующие условиям, также можно вернуть в рамках нашей 30-дневной политики возврата средств. Перед возвратом любого товара свяжитесь с нашей командой, чтобы уточнить применимые условия и инструкции по возврату.
Вам также может понравиться
Публикации в блоге
Новости промышленной автоматизации, технические руководства и обновления продукции.
