
Получить уведомление по электронной почте, когда этот товар появится в наличии
- Описание
- Reviews
- Доставка и оплата
The Schneider Electric BMXFTB2800, also identified as the BMXFTB2800 removable terminal block, provides a 28-pin electrical connection interface for compatible Modicon X80 I/O modules. It uses removable screw-clamp terminals to connect field wiring to the module. The terminal block accepts conductors with cross-sections from 0.34 mm2 to 1 mm2 and is designed for modules equipped with a 28-pin removable terminal strip.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | BMXFTB2800 |
| Brand | Schneider Electric |
| Product Series | Modicon X80 |
| Product Type | 28-Pin Removable Terminal Block |
| Accessory Type | Removable Connection Block |
| Terminal Configuration | 28 removable terminals |
| Connection Type | Screw-clamp terminal |
| Conductor Cross-Section | 0.34-1 mm2 |
| Compatible Platform | Modicon M580 / M340 PAC |
| Intended Application | Modules with 28-pin removable terminal strips |
| Product Weight | 0.111 kg |
| Power Consumption | Passive connection accessory; no consumption value specified |
| EAN | 3595864133621 |
| Environmental Carbon Footprint | 10 kg CO2 eq. |
Modicon X80 Terminal Connection and Wiring Characteristics
The BMXFTB2800 provides a detachable field-wiring interface for compatible Modicon X80 modules. Its 28-pin configuration allows the module-side electrical connections to be disconnected together with the removable terminal block during maintenance or module replacement.
The screw-clamp connection design secures individual conductors mechanically. Supported conductor cross-sections range from 0.34 mm2 to 1 mm2.
For installation, conductor preparation and tightening must follow the manufacturer's terminal connection instructions. Verify the terminal assignment against the corresponding I/O module wiring diagram before reconnecting field signals.
The Modicon X80 platform supports common module hardware across M580 and M340 PAC architectures. However, compatibility of the BMXFTB2800 must be confirmed against the specific module's terminal-block requirements.
Frequently Asked Questions (FAQ)
Q: Which Modicon X80 modules can use the BMXFTB2800?
A: It is intended for modules equipped with a 28-pin removable terminal strip. Confirm the exact module reference and terminal configuration before installation.
Q: What conductor sizes are supported by the BMXFTB2800?
A: The specified conductor cross-section is 0.34 mm2 to 1 mm2. Actual conductor preparation must comply with the module and terminal connection instructions.
Q: Can the BMXFTB2800 be disconnected during module maintenance?
A: The terminal block is designed to be removable. Before disconnecting it, isolate the relevant field circuits and follow the controller manufacturer's maintenance procedures. Its removability does not establish that the connected module supports hot-swapping under energized conditions.
Field Installation Guidelines
- Module Verification: Confirm that the target Modicon X80 module uses a compatible 28-pin removable terminal block.
- Power Isolation: Isolate relevant field power and signal circuits before wiring or removing the terminal block.
- Conductor Preparation: Select conductors within the specified 0.34-1 mm2 cross-section range.
- Terminal Assignment: Match each conductor to the module's official terminal allocation diagram.
- Mechanical Connection: Secure conductors using the specified screw-clamp procedure and manufacturer tightening requirements.
- Cable Routing: Separate low-level analog signal wiring from high-voltage and high-current conductors where applicable.
- Grounding and Shielding: Terminate cable shields according to the system grounding design and the connected module's installation instructions.
- Final Inspection: Check conductor retention, terminal alignment, wiring identification, and correct seating of the removable block before restoring power.
Оплата: T/T, Western Union.
Порт отгрузки: Сямынь.
Срок поставки: Обычно 1–3 рабочих дня после подтверждения оплаты (при наличии товара на складе).
Доставка по всему миру: Мы поставляем детали для промышленной автоматизации клиентам по всему миру. Стоимость перевозки указывается в вашем запросе на коммерческое предложение.
Часто задаваемые вопросы
Часто задаваемые вопросы о ценах, доставке, гарантии и возврате товаровНажмите Запросить предложение на странице товара и отправьте нам номер детали, необходимое количество и страну назначения. Наша команда продаж ответит, сообщив о текущем наличии, цене и предполагаемом сроке доставки.
Товары, имеющиеся в наличии, обычно подготавливаются после оплаты и подтверждения заказа. Большинство заказов отправляется с нашего склада в Китае, однако место отправки может варьироваться в зависимости от текущих запасов.
Да. Мы отправляем детали для промышленной автоматизации клиентам по всему миру. Стоимость и сроки доставки зависят от места назначения, веса посылки, размера товара и местных требований к импорту.
Мы обычно пользуемся услугами DHL, FedEx, UPS и других международных курьерских служб. Перевозчика можно выбрать с учётом пункта назначения, скорости доставки, размера отправления и требований клиента.
На наши товары обычно распространяется 12-месячная гарантия. Товары, соответствующие условиям, также можно вернуть в рамках нашей 30-дневной политики возврата средств. Перед возвратом любого товара свяжитесь с нашей командой, чтобы уточнить применимые условия и инструкции по возврату.
Вам также может понравиться
Публикации в блоге
Новости промышленной автоматизации, технические руководства и обновления продукции.
