Pređi na informacije o proizvodu
1 od 3

Schneider BMXDDM16025H Modicon X80 Discrete I/O Module

18 na stanju
  • Manufacturer: Schneider
  • Product No.: BMXDDM16025H
  • Country of origin: France
  • Product Type: Modicon X80 Discrete I/O Module
  • Condition: Potpuno nov
  • Payment: T/T, Western Union
  • Weight: 168 g
  • Shipping port: Sjamен
  • Warranty: 12 meseci
  • Opis
  • Reviews
  • Dostava i plaćanje

The Schneider Electric BMXDDM16025H is a Modicon X80 discrete I/O module with 8 DC inputs and 8 relay outputs. It combines 24 VDC input signal monitoring with relay-based output switching in a single module. Its conformal coating and severe-environment classification distinguish this version from standard-treatment configurations.

Input and Output Configuration

The module provides two different signal interfaces within one I/O unit:

  • 8 discrete inputs: 24 VDC positive logic, current-sinking input type.
  • 8 relay outputs: Isolated relay contacts for switching DC or AC loads.
  • Input current: 3.5 mA per channel.
  • Input impedance: 6,800 Ohm.
  • Input channels cannot be connected in parallel.

The inputs receive signals from field sensors, while the relay outputs switch external loads through their respective output circuits. This arrangement allows the controller to monitor discrete field states and operate relay-controlled devices using the same module.

Input Signal Characteristics

The 24 VDC inputs support 2-wire and 3-wire proximity sensors conforming to IEC 60947-5-2 and IEC 61131-2 Type 3 requirements. The guaranteed input thresholds are:

  • Logic state 1: At least 11 V and 2 mA.
  • Logic state 0: Maximum 5 V and 1.5 mA.
  • Typical response time: 4 ms.
  • Maximum response time: 7 ms.

These thresholds define the signal levels required for reliable input-state recognition. The module also provides reverse-polarity protection on the input side.

Relay Output Characteristics

The eight relay outputs support both DC and AC switching applications.

  • DC operating voltage: 19-30 VDC.
  • AC operating voltage: 19-264 VAC.
  • Maximum output current: 2 A.
  • Output activation response:

Technical Specifications

Parameter Specification
Model BMXDDM16025H
Brand Schneider Electric
Product Range Modicon X80
Product Type Discrete I/O Module
Application Severe environments
Discrete Inputs 8
Input Voltage 24 VDC
Input Type Current sink, positive logic
Input Current 3.5 mA
Input Impedance 6,800 Ohm
Discrete Outputs 8
Output Type Relay
DC Output Voltage 19-30 VDC
AC Output Voltage 19-264 VAC
Maximum Output Current 2 A
Typical Input Response Time 4 ms
Maximum Input Response Time 7 ms
Output Activation Time 10 MOhm at 500 VDC
Dielectric Strength 1,500 VAC, primary/secondary; 2,830 VAC, output relay; 500 VDC, between I/O groups
External Input Fuse 0.5 A fast-blow per input group
Output Protection External fast-blow fuse per output channel or group
Protective Treatment Conformal coating
Operating Temperature -25 to 70 deg C
Relative Humidity 5-95% at 55 deg C, non-condensing
Environmental Protection IP20
Gas Resistance Gx, 3C4
Dust and Sand Resistance 3S4
Salt Resistance Level 2
Mold and Fungal Spore Resistance 3B2
Net Weight 0.135 kg
Package Dimensions 12.0 x 11.0 x 5.5 cm
Package Weight 168 g
Lifecycle Carbon Footprint 35 kg CO2 eq.

Frequently Asked Questions

Q: What is the difference between BMXDDM16025H and BMXDDM16025?

A: Both models provide 8 x 24 VDC positive logic inputs and 8 relay outputs. The BMXDDM16025H is the hardened version, featuring conformal coating and an extended operating temperature range of -25 to 70 deg C.

Q: Can the relay outputs switch both AC and DC loads?

A: Yes. The relay outputs support 19-30 VDC and 19-264 VAC operating ranges, with a maximum output current of 2 A. The connected load must remain within the applicable voltage and current ratings.

Q: Can the eight input channels be connected in parallel?

A: No. Input paralleling is not permitted. Each input channel should receive its own correctly wired field signal.

Plaćanje: T/T, Western Union.

Luka otpreme: Siamen.

Rok isporuke: Obično 1–3 radna dana nakon potvrde uplate (u zavisnosti od zaliha).

Isporuka širom sveta: Šaljemo delove za industrijsku automatizaciju kupcima širom sveta. Troškovi prevoza se navode u vašem RFQ-u.

Česta pitanja (FAQ)

Najčešća pitanja o ponudama, isporuci, garanciji i povraćaju robe

Na stranici proizvoda kliknite na Zatražite ponudu i pošaljite nam broj dela, potrebnu količinu i zemlju odredišta. Naš prodajni tim će odgovoriti informacijama o trenutnoj dostupnosti, ceni i procenjenom roku isporuke.

Artikli koji su na stanju obično se pripremaju nakon uplate i potvrde porudžbine. Većina porudžbina šalje se iz našeg skladišta u Kini, iako mesto slanja može da varira u zavisnosti od trenutnog stanja zaliha.

Da. Šaljemo delove za industrijsku automatizaciju kupcima širom sveta. Troškovi i vreme isporuke zavise od odredišta, težine paketa, veličine proizvoda i lokalnih uvoznih zahteva.

Najčešće koristimo DHL, FedEx, UPS i druge međunarodne kurirske službe. Prevoznik se može izabrati u skladu sa odredištem, brzinom isporuke, veličinom pošiljke i zahtevima kupca.

Naši proizvodi uglavnom imaju garanciju od 12 meseci. Proizvodi koji ispunjavaju uslove mogu se takođe vratiti u okviru naše politike povraćaja novca u roku od 30 dana. Obratite se našem timu pre vraćanja bilo kog artikla da biste potvrdili važeće uslove i uputstva za povraćaj.

Products FAQs

Možda će vam se dopasti i