
Bićete obavešteni imejlom kada ovaj proizvod bude dostupan
- Opis
- Reviews
- Dostava i plaćanje
The Schneider Electric BMXDRC0805 is an 8-channel relay discrete output module in the Modicon X80 range. It provides isolated relay contacts with normally open (NO) and normally closed (NC) configurations for switching AC and DC loads. Its output voltage range covers 24 to 240 VAC and 24 to 125 VDC, making it suitable for integration into Modicon M340 and M580 local or remote I/O architectures.
Output Configuration and Operation
The BMXDRC0805 uses electromechanical relay outputs to switch external loads according to commands from the PLC. Its 8 isolated relay outputs provide complementary NO and NC contacts, allowing the output circuit to be configured according to the requirements of the connected equipment.
The module supports positive or negative output logic. The minimum switching current is 10 mA at 5 VDC. The specified response times are no more than 10 ms for activation and 13 ms for deactivation, which should be considered when evaluating output timing in the control sequence.
Electrical Characteristics and Protection
The output circuits support switching voltages from 24 to 240 VAC or 24 to 125 VDC. The actual load current capacity is not specified in the supplied data, so the connected load must be checked against the manufacturer's output current ratings before installation.
The module specifies external short-circuit, overload and inductive-load overvoltage protection requirements. Its insulation resistance is greater than 10 MOhm at 500 VDC, and its dielectric strength is 1780 VAC at 50/60 Hz for 1 minute.
PLC Integration and Installation
The BMXDRC0805 belongs to the Modicon X80 common I/O platform, which supports Modicon M340 and M580 PLC architectures, including local and remote I/O configurations. It is installed on the PLC rack and secured with two screws.
Electrical connections use a 40-way removable terminal block. Supported terminal block types include caged, screw-clamp and spring connections. The terminal block must be selected separately according to the required wiring arrangement.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | BMXDRC0805 |
| Brand | Schneider Electric |
| Product Type | Relay Discrete Output Module |
| Product Range | Modicon X80 |
| Number of Outputs | 8 |
| Output Type | Isolated relay outputs |
| Contact Configuration | NO / NC, complementary |
| Discrete Output Logic | Positive or negative |
| Output Switching Voltage | 24-240 VAC / 24-125 VDC |
| Minimum Switching Current | 10 mA at 5 VDC |
| Output Activation Time | 10 MOhm at 500 VDC |
| Dielectric Strength | 1780 VAC, 50/60 Hz, 1 min |
| Protection Requirements | External short-circuit, overload and inductive-load overvoltage protection |
| Mounting | Modicon X80 rack, secured with 2 screws |
| Connection | 40-way removable terminal block |
| Terminal Block Types | Caged, screw-clamp or spring |
| Protection Rating | IP20 |
| Operating Temperature | 0 to 60 deg C |
| Relative Humidity | 5-95%, non-condensing |
| Dimensions (W x D x H) | 32 x 100 x 86 mm |
| Net Weight | 0.189 kg |
| Certifications | CE, UL, CSA, RCM, EAC, UKCA, Merchant Navy |
| Standards | EN 61000-6-5, EN 61850-3, EN 61131-2 |
| Country of Origin | USA |
| GTIN | 3606489485061 |
Frequently Asked Questions
Q: Which PLC platforms support the BMXDRC0805?
A: The BMXDRC0805 is designed for Modicon M340 and Modicon M580 PLC architectures. It supports both local and remote I/O configurations within the Modicon X80 platform.
Q: What terminal block is required for the BMXDRC0805?
A: The module uses a 40-way removable terminal block. Caged, screw-clamp and spring-type connections are specified as supported options. The appropriate terminal block must be selected for the installation.
Q: Can the BMXDRC0805 switch both AC and DC loads?
A: Yes. Its relay outputs support 24-240 VAC and 24-125 VDC switching voltages. However, the load current rating must also be checked against the manufacturer's specifications before connecting field devices.
Plaćanje: T/T, Western Union.
Luka otpreme: Siamen.
Rok isporuke: Obično 1–3 radna dana nakon potvrde uplate (u zavisnosti od zaliha).
Isporuka širom sveta: Šaljemo delove za industrijsku automatizaciju kupcima širom sveta. Troškovi prevoza se navode u vašem RFQ-u.
Česta pitanja (FAQ)
Najčešća pitanja o ponudama, isporuci, garanciji i povraćaju robeNa stranici proizvoda kliknite na Zatražite ponudu i pošaljite nam broj dela, potrebnu količinu i zemlju odredišta. Naš prodajni tim će odgovoriti informacijama o trenutnoj dostupnosti, ceni i procenjenom roku isporuke.
Artikli koji su na stanju obično se pripremaju nakon uplate i potvrde porudžbine. Većina porudžbina šalje se iz našeg skladišta u Kini, iako mesto slanja može da varira u zavisnosti od trenutnog stanja zaliha.
Da. Šaljemo delove za industrijsku automatizaciju kupcima širom sveta. Troškovi i vreme isporuke zavise od odredišta, težine paketa, veličine proizvoda i lokalnih uvoznih zahteva.
Najčešće koristimo DHL, FedEx, UPS i druge međunarodne kurirske službe. Prevoznik se može izabrati u skladu sa odredištem, brzinom isporuke, veličinom pošiljke i zahtevima kupca.
Naši proizvodi uglavnom imaju garanciju od 12 meseci. Proizvodi koji ispunjavaju uslove mogu se takođe vratiti u okviru naše politike povraćaja novca u roku od 30 dana. Obratite se našem timu pre vraćanja bilo kog artikla da biste potvrdili važeće uslove i uputstva za povraćaj.
Možda će vam se dopasti i
Blog objave
Vesti iz industrijske automatizacije, tehnički vodiči i novosti o proizvodima.
