
Bićete obavešteni imejlom kada ovaj proizvod bude dostupan
- Opis
- Reviews
- Dostava i plaćanje
The Schneider BMXEHC0800H is an 8-channel high-speed counter module in the Modicon X80 I/O family, designed for counting and frequency measurement in industrial automation systems. It supports counting frequencies up to 10 kHz and accepts signals from 19.2-30 V DC two-wire or three-wire proximity sensors and 10-30 V DC push-pull incremental encoders. Its extended operating temperature range is -25 to 70 deg C.
Counting Functions and Signal Processing
The BMXEHC0800H processes high-speed input signals for counting and measurement tasks. Its supported functions include:
- Up/down counting
- 32-bit up-counting
- Down-counting
- Modulo counting
- Frequency measurement
- Counting event detection
The module supports 8 high-speed channels, with 2 inputs in single-mode operation or 3 inputs in a specific two-phase operating mode. The maximum counting frequency is 10 kHz, making it suitable for applications that require pulse counting and incremental position or speed-related signal processing.
Input Compatibility and Electrical Characteristics
The module accepts signals from 19.2-30 V DC two-wire and three-wire proximity sensors, as well as incremental encoders with 10-30 V DC push-pull outputs. The guaranteed logic thresholds define the valid input states: 11-30 V DC for logic 1 and 5 V DC for logic 0.
The 4.5 mA input current and 5 ms cycle time are relevant when evaluating sensor output characteristics and the timing requirements of the counting application. The specified 1500 V insulation voltage applies for 60 seconds.
Electrical Connection and Power Requirements
The BMXEHC0800H uses one 20-pin connector for its electrical connections. Its power consumption is divided between the internal bus supply and the encoder supply:
- 200 mA at 3.3 V DC bus
- 80 mA at 24 V DC encoder supply
These are separate supply requirements and should be considered when checking the available capacity of the PLC rack power supply and the external encoder supply.
Installation and Environmental Conditions
The module is designed for installation in a Modicon X80 module rack and is secured with two screws. Its IP20 enclosure protects the electronic components against contact and solid foreign objects within the limits of this protection rating; it does not provide protection against water ingress.
The extended operating temperature range of -25 to 70 deg C and specified resistance to gases, dust, sand, salt, and biological contaminants support its use in demanding installation environments. Relative humidity is specified at 10-95%, with condensation not permitted.
Certifications and Standards
The product carries the following certifications and environmental classifications according to the supplied Schneider specifications:
- CE, UL, CSA, RCM and EAC
- Merchant marine
- ATEX Zone 2/22
- IECEx Zone 2/22
- Class I, Division 2 hazardous-location classification
- IEC 61131-2 and IEC 61010-2-201
- IACS E10
- EN/IEC 61850-3, Location G
- EN/IEC 61000-6-5, Interface Types 1 and 2
The specifications also identify gas resistance Class Gx under ISA S71.04, gas resistance Class 3C4, dust and sand resistance Class 3S4, and mould resistance Class 3B2.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | BMXEHC0800H |
| Brand | Schneider Electric |
| Product Type | High-Speed Counter Module |
| Product Family | Modicon X80 |
| Automation Platform | Modicon M340 |
| Number of Channels | 8 |
| Maximum Counting Frequency | 10 kHz |
| Number of Inputs | 2 in single mode; 3 in special two-phase mode |
| Input Type | High-speed |
| Input Voltage | 24 V DC, Type 3 |
| Input Voltage Limits | 24 V DC |
| Input Current | 4.5 mA |
| Guaranteed Logic 1 Voltage | 11-30 V DC |
| Guaranteed Logic 1 Current | Greater than 2 mA at U >= 11 V |
| Guaranteed Logic 0 Voltage | 5 V DC |
| Guaranteed Logic 0 Current | Less than 1.5 mA |
| Compatible Sensors | 19.2-30 V DC 2-wire/3-wire proximity sensors |
| Encoder Compatibility | 10-30 V DC push-pull incremental encoders |
| Counting Functions | Event counting, up/down counting, modulo counting, frequency measurement, 32-bit up-counting and down-counting |
| Cycle Time | 5 ms |
| Insulation Voltage | 1500 V for 60 s |
| Electrical Connection | 1 x 20-pin connector |
| Bus Current Consumption | 200 mA at 3.3 V DC |
| Encoder Supply Current | 80 mA at 24 V DC |
| Module Format | Standard |
| Protective Coating | Conformal coating |
| Operating Temperature | -25 to 70 deg C |
| Relative Humidity | 10-95%, non-condensing |
| Protection Rating | IP20 |
| Environmental Resistance | Gas, dust, sand, salt and mould resistance classifications specified |
| Product Certifications | CE, UL, CSA, RCM, EAC, Merchant Marine, ATEX, IECEx |
| Standards | IEC 61131-2, IEC 61010-2-201, UL 61010-2-201, CSA C22.2 No. 61010-2-201, IACS E10 |
| Product Weight | 0.113 kg |
| EAN | 3595864010427 |
| Lifecycle Carbon Footprint | 103 kg CO2 eq. |
Frequently Asked Questions
Q: How many high-speed channels does the BMXEHC0800H provide?
A: The module provides 8 high-speed channels, with 2 inputs in single-mode operation and 3 inputs in its specified special two-phase operating mode. The maximum counting frequency is 10 kHz.
Q: Which sensors and encoders are compatible with the BMXEHC0800H?
A: It supports 19.2-30 V DC two-wire and three-wire proximity sensors, along with incremental encoders featuring 10-30 V DC push-pull outputs. The sensor output voltage and current characteristics must meet the module's specified input thresholds.
Q: What installation conditions should be checked before replacing this module?
A: Verify the Modicon X80 rack installation, two-screw fastening arrangement, 20-pin connection, bus power requirements and 24 V DC encoder supply. Also check the sensor configuration, counting mode and operating temperature requirements before commissioning.
Plaćanje: T/T, Western Union.
Luka otpreme: Siamen.
Rok isporuke: Obično 1–3 radna dana nakon potvrde uplate (u zavisnosti od zaliha).
Isporuka širom sveta: Šaljemo delove za industrijsku automatizaciju kupcima širom sveta. Troškovi prevoza se navode u vašem RFQ-u.
Česta pitanja (FAQ)
Najčešća pitanja o ponudama, isporuci, garanciji i povraćaju robeNa stranici proizvoda kliknite na Zatražite ponudu i pošaljite nam broj dela, potrebnu količinu i zemlju odredišta. Naš prodajni tim će odgovoriti informacijama o trenutnoj dostupnosti, ceni i procenjenom roku isporuke.
Artikli koji su na stanju obično se pripremaju nakon uplate i potvrde porudžbine. Većina porudžbina šalje se iz našeg skladišta u Kini, iako mesto slanja može da varira u zavisnosti od trenutnog stanja zaliha.
Da. Šaljemo delove za industrijsku automatizaciju kupcima širom sveta. Troškovi i vreme isporuke zavise od odredišta, težine paketa, veličine proizvoda i lokalnih uvoznih zahteva.
Najčešće koristimo DHL, FedEx, UPS i druge međunarodne kurirske službe. Prevoznik se može izabrati u skladu sa odredištem, brzinom isporuke, veličinom pošiljke i zahtevima kupca.
Naši proizvodi uglavnom imaju garanciju od 12 meseci. Proizvodi koji ispunjavaju uslove mogu se takođe vratiti u okviru naše politike povraćaja novca u roku od 30 dana. Obratite se našem timu pre vraćanja bilo kog artikla da biste potvrdili važeće uslove i uputstva za povraćaj.
Možda će vam se dopasti i
Blog objave
Vesti iz industrijske automatizacije, tehnički vodiči i novosti o proizvodima.
