Galerija medija
Galerija medija
Galerija medija

Schneider Electric BMENOC0301C Modicon M580 Ethernet Communication Module

18 na stanju

Manufacturer: Schneider
Product No.: BMENOC0301C
Country of origin: France
Product Type: Modicon M580 Ethernet Communication Module
Condition: Potpuno nov
Payment: T/T, Western Union
Weight: 0.2 kg
Shipping port: Sjamен
Warranty: 12 meseci

Opis
Reviews
Dostava i plaćanje

Schneider Electric BMENOC0301C Modicon M580 Ethernet Communication Module

Configured for Ethernet communication between Modicon M580 controllers and network devices, the Schneider Electric BMENOC0301C (BMENOC0301C communication module) provides Modbus TCP and EtherNet/IP interface functions through three Ethernet ports.

Hardware Specifications

Parameter	Specification
Model	BMENOC0301C
Brand	Schneider Electric
Product Range	Modicon M580
Product Type	Ethernet communication module
Compatible Controllers	Modicon M580 standalone, redundant, and safety CPUs
Compatible Rack	Modicon X80 rack with Ethernet backplane
Installation Position	Main rack
Backplane Slot	Ethernet + X-bus slot
Slots Occupied	1
Maximum Modules per Rack	4
Ethernet Ports	3
Ethernet Connectors	RJ45
Ethernet Speed	10/100 Mbit/s
Transmission Mode	Double-shielded twisted-pair cable
Communication Services	Modbus TCP, EtherNet/IP, SNMP, FDR, RSTP, port mirroring
Integrated Switch	Multi-port Ethernet switch
Web Server	Commissioning, operation, and maintenance
Power Supply	Internal rack power
Power Consumption	900 mA at 3.3 VDC for product version >= 13; 1800 mA at 3.3 VDC for product version < 13
Width	32 mm
Height	103.7 mm
Length	86 mm
Weight	0.2 kg
Operating Temp	0 to 60 deg C
IP Rating	IP20
Conformal Coating	Yes
Local Diagnostics	RUN, ERR, ETH MS, and ETH NS LEDs
Certifications	CE, UL, CSA, RCM, EAC, Marine, ATEX Zone 2/22, IECEx Zone 2/22
Standards	IEC 61131-2, IEC 61010-2-201, IEC 61850-3, IEC 60079-0, and related listed standards

M580 Ethernet Network and Backplane Communication

The BMENOC0301C occupies one Ethernet + X-bus slot on the M580 main rack. It receives power through the rack internal power system and communicates through the Ethernet backplane.

Three RJ45 ports support 10/100 Mbit/s Ethernet communication. The integrated multi-port switch supports RSTP, port mirroring, bandwidth management, and Ethernet network services.

Modbus TCP I/O scanning and messaging, together with EtherNet/IP I/O scanning and messaging, provide controller-to-device data exchange. SNMP supports network management, while the FDR server provides device replacement-related network services.

The module supports M580 standalone CPUs, redundant CPUs, compatible safety CPUs, and X80 racks equipped with an Ethernet backplane.

Frequently Asked Questions (FAQ)

Q: How is the BMENOC0301C powered when installed in an M580 rack?
A: The module receives its operating power from the internal power distribution of the rack.

Q: What Ethernet interfaces are provided by the BMENOC0301C?
A: The module provides three RJ45 Ethernet ports supporting 10/100 Mbit/s transmission through double-shielded twisted-pair cabling.

Q: Does the BMENOC0301C support hot-swapping or field firmware replacement?
A: The supplied information does not specify hot-swap or firmware replacement conditions. Installation and firmware procedures should follow the applicable Schneider Electric documentation for the module revision.

Field Installation Guidelines

Install the BMENOC0301C in the designated Ethernet + X-bus position of the M580 main rack and secure the module according to the rack installation procedure.

Use shielded Ethernet cabling compatible with the RJ45 interfaces. Maintain physical separation between Ethernet cables and high-current, switching, or high-noise power conductors.

Terminate cable shields according to the system grounding design and Schneider Electric installation instructions. Avoid creating unintended shield-current paths between separately grounded equipment.

Verify rack power availability before insertion or removal. Confirm the module revision when applying the specified 3.3 VDC backplane current requirement.

After installation, inspect the RUN, ERR, ETH MS, and ETH NS indicators to verify processor, module, port configuration, and network status.

For installations in ATEX or IECEx Zone 2/22 environments, apply the applicable hazardous-location installation requirements and certified system configuration.

Plaćanje: T/T, Western Union.

Luka otpreme: Siamen.

Rok isporuke: Obično 1–3 radna dana nakon potvrde uplate (u zavisnosti od zaliha).

Isporuka širom sveta: Šaljemo delove za industrijsku automatizaciju kupcima širom sveta. Troškovi prevoza se navode u vašem RFQ-u.

Česta pitanja (FAQ)

Najčešća pitanja o ponudama, isporuci, garanciji i povraćaju robe

Na stranici proizvoda kliknite na Zatražite ponudu i pošaljite nam broj dela, potrebnu količinu i zemlju odredišta. Naš prodajni tim će odgovoriti informacijama o trenutnoj dostupnosti, ceni i procenjenom roku isporuke.

Artikli koji su na stanju obično se pripremaju nakon uplate i potvrde porudžbine. Većina porudžbina šalje se iz našeg skladišta u Kini, iako mesto slanja može da varira u zavisnosti od trenutnog stanja zaliha.

Da. Šaljemo delove za industrijsku automatizaciju kupcima širom sveta. Troškovi i vreme isporuke zavise od odredišta, težine paketa, veličine proizvoda i lokalnih uvoznih zahteva.

Najčešće koristimo DHL, FedEx, UPS i druge međunarodne kurirske službe. Prevoznik se može izabrati u skladu sa odredištem, brzinom isporuke, veličinom pošiljke i zahtevima kupca.

Naši proizvodi uglavnom imaju garanciju od 12 meseci. Proizvodi koji ispunjavaju uslove mogu se takođe vratiti u okviru naše politike povraćaja novca u roku od 30 dana. Obratite se našem timu pre vraćanja bilo kog artikla da biste potvrdili važeće uslove i uputstva za povraćaj.