Pređi na informacije o proizvodu
1 od 3

Schneider Electric BMXFTA300 Modicon X80 Prefabricated Cable Assembly

18 na stanju
  • Manufacturer: Schneider
  • Product No.: BMXFTA300
  • Country of origin: France
  • Product Type: Modicon X80 Prefabricated Cable Assembly
  • Condition: Potpuno nov
  • Payment: T/T, Western Union
  • Weight: 0.5 kg
  • Shipping port: Sjamен
  • Warranty: 12 meseci
  • Opis
  • Reviews
  • Dostava i plaćanje

The Schneider Electric BMXFTA300, also cataloged as the BMXFTA300 prefabricated cable assembly, provides the electrical connection between Modicon M340 I/O modules and Advantys Telefast ABE 7 terminal blocks. It uses a 28-pin removable terminal block connector on the module side and a 25-pin SUB-D connector on the terminal block side, with a cable length of 3 m.

Hardware Specifications

Parameter Specification
Model BMXFTA300
Brand Schneider Electric
Product Series Modicon X80
Product Type Prefabricated Cable Assembly
Accessory Type Preformed Cable Set
Weight 0.5 kg
Cable Length 3 m
Module-Side Connection 1 removable 28-pin terminal block
Terminal Block-Side Connection 1 SUB-D 25-pin connector
Connector Configuration 28-pin terminal block to 25-pin SUB-D
Compatible I/O Modules BMXAMI0800, BMXAMI0810
Compatible Terminal Blocks ABE7CPA02, ABE7CPA03, ABE7CPA31, ABE7CPA31/E
Packaging Quantity 1 unit
EAN 3595864080451

I/O Connection Architecture and Compatibility

The BMXFTA300 provides a preassembled electrical interface between Modicon M340 analog I/O modules and Advantys Telefast ABE 7 connection systems.

Its connection arrangement consists of:

  • Module side: A removable 28-pin terminal block connects to the I/O module.
  • Terminal block side: A 25-pin SUB-D connector connects to the ABE 7 terminal block.
  • Cable assembly: A fixed 3 m cable carries the corresponding electrical connections between both interfaces.

The cable is specified for the BMXAMI0800 and BMXAMI0810 analog input modules. Compatibility also includes the ABE7CPA02, ABE7CPA03, ABE7CPA31, and ABE7CPA31/E terminal block references.

For system integration, connector pin assignments and channel wiring must correspond to the selected I/O module and terminal block configuration.

Frequently Asked Questions

Q: Can the BMXFTA300 be used with both BMXAMI0800 and BMXAMI0810?

A: Yes. Both analog input modules are explicitly listed as compatible products. The cable provides the 28-pin terminal block interface required on the module side.

Q: Does the BMXFTA300 support hot-swapping?

A: Hot-swapping capability is not specified for this cable assembly. Disconnect the associated electrical circuits and follow the module manufacturer's maintenance procedure before removing or installing connectors.

Q: What should be checked when replacing an existing BMXFTA300?

A: Verify the 28-pin removable terminal block, 25-pin SUB-D connector, 3 m cable length, and compatibility with the installed ABE 7 terminal block. Check connector condition and wiring continuity before returning the I/O circuit to service.

Field Installation Guidelines

1. Connector Verification: Confirm that the 28-pin removable terminal block matches the designated Modicon I/O module interface and that the 25-pin SUB-D connector matches the ABE 7 terminal block.

2. Cable Routing: Route the 3 m cable away from high-voltage power conductors, motor cables, and sources of electromagnetic interference where practical.

3. Mechanical Installation: Avoid excessive bending, tensile loading, twisting, or compression of the cable. Secure the assembly to prevent connector strain.

4. Electrical Inspection: Inspect connector contacts for oxidation, contamination, or mechanical damage before installation.

5. Shielding and Grounding: Follow the module and terminal block installation documentation for cable shielding and grounding arrangements. Do not assume an undocumented shield termination configuration.

6. Commissioning: Verify connector engagement, wiring continuity, channel correspondence, and analog input signal readings before placing the associated control loop into operation.

Plaćanje: T/T, Western Union.

Luka otpreme: Siamen.

Rok isporuke: Obično 1–3 radna dana nakon potvrde uplate (u zavisnosti od zaliha).

Isporuka širom sveta: Šaljemo delove za industrijsku automatizaciju kupcima širom sveta. Troškovi prevoza se navode u vašem RFQ-u.

Česta pitanja (FAQ)

Najčešća pitanja o ponudama, isporuci, garanciji i povraćaju robe

Na stranici proizvoda kliknite na Zatražite ponudu i pošaljite nam broj dela, potrebnu količinu i zemlju odredišta. Naš prodajni tim će odgovoriti informacijama o trenutnoj dostupnosti, ceni i procenjenom roku isporuke.

Artikli koji su na stanju obično se pripremaju nakon uplate i potvrde porudžbine. Većina porudžbina šalje se iz našeg skladišta u Kini, iako mesto slanja može da varira u zavisnosti od trenutnog stanja zaliha.

Da. Šaljemo delove za industrijsku automatizaciju kupcima širom sveta. Troškovi i vreme isporuke zavise od odredišta, težine paketa, veličine proizvoda i lokalnih uvoznih zahteva.

Najčešće koristimo DHL, FedEx, UPS i druge međunarodne kurirske službe. Prevoznik se može izabrati u skladu sa odredištem, brzinom isporuke, veličinom pošiljke i zahtevima kupca.

Naši proizvodi uglavnom imaju garanciju od 12 meseci. Proizvodi koji ispunjavaju uslove mogu se takođe vratiti u okviru naše politike povraćaja novca u roku od 30 dana. Obratite se našem timu pre vraćanja bilo kog artikla da biste potvrdili važeće uslove i uputstva za povraćaj.

Products FAQs

Možda će vam se dopasti i