
Bićete obavešteni imejlom kada ovaj proizvod bude dostupan
- Opis
- Reviews
- Dostava i plaćanje
The Schneider Electric BMXNRP0200 is a two-channel fiber optic Ethernet repeater from the Modicon X80 range. It converts two 100BASE-TX copper Ethernet connections to two 100BASE-FX multimode fiber connections, extending Ethernet communication over distances of up to 2,000 m. It operates at 24 VDC and supports IEEE 802.3u Ethernet interfaces.
Ethernet and Fiber Optic Interfaces
The BMXNRP0200 provides four Ethernet connections:
- 2 x RJ45 ports supporting 100BASE-TX.
- 2 x multimode fiber optic ports supporting 100BASE-FX.
- Ethernet interface compliance with IEEE 802.3u.
- Optical wavelength: 1310 nm.
- Maximum operating distance: 2,000 m.
The repeater transfers Ethernet communication between copper and fiber optic network segments. Fiber connections allow communication over longer distances than conventional copper Ethernet cabling and provide electrical isolation between connected network segments.
Optical Transmission Characteristics
The optical interface operates at a wavelength of 1310 nm. Its specified attenuation ranges depend on the multimode fiber core size:
- 50/125 um fiber: -23.5 to -14 dB.
- 62.5/125 um fiber: -20 to -14 dB.
The receiver sensitivity is specified from -31 to -14 dBm, with a rise/fall time of 3 ns. These values are relevant when checking fiber characteristics, optical signal levels and the transmission path against the required communication distance.
Power Supply and Diagnostics
The module operates with a rated voltage of 24 VDC. Its typical current consumption is 140 mA, with a maximum of 200 mA. Local LED indicators provide information about power status, error conditions, Ethernet link status, and fiber connection status and activity.
The BMXNRP0200 supports hot swapping according to the manufacturer's product specifications. This function is relevant when planning module replacement and maintenance procedures within the applicable Modicon X80 installation.
Installation and Environmental Conditions
The BMXNRP0200 is designed for installation in a module carrier and is secured with two screws. Ethernet interlink cables provide connections to CRA drop adapters in the described Modicon architecture.
Its IP20 enclosure rating is intended for installation inside a suitable equipment enclosure. The specified operating temperature is 0 to 60 deg C, while the storage temperature range is -40 to 70 deg C. The module also supports relative humidity from 0 to 95% and an operating altitude of up to 4,000 m.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | BMXNRP0200 |
| Brand | Schneider Electric |
| Product Range | Modicon X80 |
| Product Type | Fiber Optic Ethernet Repeater |
| Fiber Type | Multimode |
| Rated Voltage | 24 VDC |
| Typical Current Consumption | 140 mA |
| Maximum Current Consumption | 200 mA |
| Copper Ethernet Ports | 2 x RJ45, 100BASE-TX |
| Fiber Ethernet Ports | 2 x 100BASE-FX |
| Ethernet Standard | IEEE 802.3u |
| Optical Wavelength | 1310 nm |
| Operating Distance | 0 to 2,000 m |
| Attenuation (50/125 um) | -23.5 to -14 dB |
| Attenuation (62.5/125 um) | -20 to -14 dB |
| Receiver Sensitivity | -31 to -14 dBm |
| Rise/Fall Time | 3 ns |
| Hot Swapping | Supported |
| Local Diagnostics | Power, error, Ethernet link, fiber link and activity LEDs |
| Dielectric Strength | 1,400 VDC between field and bus; 500 VDC between channels |
| Protection Rating | IP20 |
| Operating Temperature | 0 to 60 deg C |
| Storage Temperature | -40 to 70 deg C |
| Relative Humidity | 0 to 95% |
| Maximum Operating Altitude | 4,000 m |
| Dimensions (W x H x D) | 32 x 100 x 86 mm |
| Weight | 203 g |
| Product Standards | IEC 61010-2-201, IEC 61131-2, UL 61010-2-201, CSA C22.2 No. 61010-2-201 |
| Certifications | CE, RCM, CSA, EAC, UL, Merchant Navy |
| EAN | 3595864142753 |
| Lifecycle Carbon Footprint | 167 kg CO2 eq. |
Frequently Asked Questions
Q: What is the difference between the two Ethernet interfaces on the BMXNRP0200?
A: The two RJ45 ports use 100BASE-TX copper Ethernet, while the two fiber optic ports use 100BASE-FX multimode fiber. This configuration allows copper Ethernet network segments to communicate through fiber optic connections.
Q: What fiber optic cable distance does the BMXNRP0200 support?
A: The specified operating distance is 0 to 2,000 m. The actual fiber installation must also satisfy the specified attenuation and receiver sensitivity limits for the selected multimode fiber type.
Q: Does the BMXNRP0200 support hot swapping?
A: Yes. Hot swapping is listed as a supported function in the product specifications. Replacement procedures should still follow the applicable Modicon X80 system and installation requirements.
Plaćanje: T/T, Western Union.
Luka otpreme: Siamen.
Rok isporuke: Obično 1–3 radna dana nakon potvrde uplate (u zavisnosti od zaliha).
Isporuka širom sveta: Šaljemo delove za industrijsku automatizaciju kupcima širom sveta. Troškovi prevoza se navode u vašem RFQ-u.
Česta pitanja (FAQ)
Najčešća pitanja o ponudama, isporuci, garanciji i povraćaju robeNa stranici proizvoda kliknite na Zatražite ponudu i pošaljite nam broj dela, potrebnu količinu i zemlju odredišta. Naš prodajni tim će odgovoriti informacijama o trenutnoj dostupnosti, ceni i procenjenom roku isporuke.
Artikli koji su na stanju obično se pripremaju nakon uplate i potvrde porudžbine. Većina porudžbina šalje se iz našeg skladišta u Kini, iako mesto slanja može da varira u zavisnosti od trenutnog stanja zaliha.
Da. Šaljemo delove za industrijsku automatizaciju kupcima širom sveta. Troškovi i vreme isporuke zavise od odredišta, težine paketa, veličine proizvoda i lokalnih uvoznih zahteva.
Najčešće koristimo DHL, FedEx, UPS i druge međunarodne kurirske službe. Prevoznik se može izabrati u skladu sa odredištem, brzinom isporuke, veličinom pošiljke i zahtevima kupca.
Naši proizvodi uglavnom imaju garanciju od 12 meseci. Proizvodi koji ispunjavaju uslove mogu se takođe vratiti u okviru naše politike povraćaja novca u roku od 30 dana. Obratite se našem timu pre vraćanja bilo kog artikla da biste potvrdili važeće uslove i uputstva za povraćaj.
Možda će vam se dopasti i
Blog objave
Vesti iz industrijske automatizacije, tehnički vodiči i novosti o proizvodima.
